• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.993-994
• /
• 2008

Electrochromic (EC) devices are capable of reversibly changing their optical properties upon charge injection and extraction induced by the external voltage. The characteristics of the EC device, such as low power consumption, high coloration efficiency, and memory effects under open circuit status, make them suitable for use in a variety of applications including smart windows and electronic papers. Coloration due to reduction or oxidation of redox chromophores can be used for EC devices (e-paper), but the switching time is slow (second level). Recently, with increasing demand for the low cost, lightweight flat panel display with paper-like readability (electronic paper), an EC display technology based on dye-modified $TiO_2$ nanoparticle electrode was developed. A well known organic dye molecule, viologen, was adsorbed on the surface of a mesoporous $TiO_2$ nanoparticle film to form the EC electrode. On the other hand, ZnO is a wide bandgap II-VI semiconductor which has been applied in many fields such as UV lasers, field effect transistors and transparent conductors. The bandgap of the bulk ZnO is about 3.37 eV, which is close to that of the $TiO_2$ (3.4 eV). As a traditional transparent conductor, ZnO has excellent electron transport properties, even in ZnO nanoparticle films. In the past few years, one-dimension (1D) nanostructures of ZnO have attracted extensive research interest. In particular, 1D ZnO nanowires renders much better electron transportation capability by providing a direct conduction path for electron transport and greatly reducing the number of grain boundaries. These unique advantages make ZnO nanowires a promising matrix electrode for EC dye molecule loading. ZnO nanowires grow vertically from the substrate and form a dense array (Fig. 1). The ZnO nanowires show regular hexagonal cross section and the average diameter of the ZnO nanowires is about 100 nm. The cross-section image of the ZnO nanowires array (Fig. 1) indicates that the length of the ZnO nanowires is about $6\;{\mu}m$. From one on/off cycle of the ZnO EC cell (Fig. 2). We can see that, the switching time of a ZnO nanowire electrode EC cell with an active area of $1\;{\times}\;1\;cm^2$ is 170 ms and 142 ms for coloration and bleaching, respectively. The coloration and bleaching time is faster compared to the $TiO_2$ mesoporous EC devices with both coloration and bleaching time of about 250 ms for a device with an active area of $2.5\;cm^2$. With further optimization, it is possible that the response time can reach ten(s) of millisecond, i.e. capable of displaying video. Fig. 3 shows a prototype with two different transmittance states. It can be seen that good contrast was obtained. The retention was at least a few hours for these prototypes. Being an oxide, ZnO is oxidation resistant, i.e. it is more durable for field emission cathode. ZnO nanotetropods were also applied to realize the first prototype triode field emission device, making use of scattered surface-conduction electrons for field emission (Fig. 4). The device has a high efficiency (field emitted electron to total electron ratio) of about 60%. With this high efficiency, we were able to fabricate some prototype displays (Fig. 5 showing some alphanumerical symbols). ZnO tetrapods have four legs, which guarantees that there is one leg always pointing upward, even using screen printing method to fabricate the cathode.

• International Commerce and Information Review
• /
• v.16 no.5
• /
• pp.179-201
• /
• 2014

The complementary effect between FDI and its absorptive capacity has drawn more attention than before. This paper intended to explore the relationship between energy intensity and such complementary effect. The absorptive capacity of FDI shows various aspects among which we focus on the human capital, the financial system and the infrastructure in this paper. Using the panel data from 1990 to 2011, the study is processed between the 20 OECD and 20 Non-OECD countries. The empirical results shown that for OECD country, a complementary effect exists between FDI and its absorbability and it has the controlling effect on energy reduction. But the effect is only significant in the human capital and the financial system. The infrastructure variable is less important in OECD country due to their high development level. However, for non-OECD country, the complementary effect between infrastructure and FDI reduces energy consumption significantly, it can get to the point that the process for infrastructure to attract FDI and also benefits from it only blow its way to the Non-OECD, developing countries, without andy special effects for the OECD countries which has already highly build up their infrastructure. Also, the financial system in Non-OECD countries is at the primary stage yet, which is not easy to contribute efficiency. To make a conclusion, the complementary effect between infrastructure and FDI in OECD country and which between finical system and FDI in non-OECD country cannot enhance energy efficiency as expected.

• Journal of Bio-Environment Control
• /
• v.5 no.1
• /
• pp.65-70
• /
• 1996

Water potential which is an physical chemistry and thermodynamic indicator expressed water status of plant root, stem and fruit could be use as a useful indicator for growth control of hydroponically grown muskmelon plant. Linear relationship was observed between EC and water potential of nutrient solution, consequently increment of EC related to the decreasing water potential and resulted with the alteration of water potential and solute potential of upper leaves. Rapid reduction in growth was observed in over 5${\mu}{\textrm}{m}$ of Cu concentration in the media and same tendency was recorded in the shoot fresh weight, root dry weight and chlorophyll content. Increment of Cu concentration in the nutrient solution leads to lower the growth rate and then the water potential of upper leaves. Turgor pressure was not affected the growth of hydroponically grown muskmelon and also Cu concentration of nutrient solution was not recognized the direct relationship to the growth characteristics of muskmelon. These results demonstrated that water potential of nutrient solution can be use as an useful indicator for water physiological comparison of plant growth in hydroponically grown muskmelon.

• Applied Chemistry for Engineering
• /
• v.8 no.3
• /
• pp.543-549
• /
• 1997

The direct reaction of carbon dioxide($CO_2$) with butane($C_4H_{10}$) to obtain synthesis gas and hydrocarbon compounds have been studied on nickel loaded catalysts. In the reaction of $CO_2$ with $C_4H_{10}$, Ni loaded catalysts showed similar activity with Pt catalyst and Coke deposition on the catalyst was severe by dehydrogenation of butane. The main products were carbon monoxide and hydrogen, when alumina and Y type zeolite were used as a support. Instead, a great deal of aromatic hydrocarbons were obtained on the Ni loaded ZSM-5 catalyst. The conversion of $CO_2$ increased with the increasing molar ratio of $CO_2$/$C_4H_{10}$ on Ni/ZSM-5, Ni/NaY and Ni/alumina catalyst, but the conversion decreased again from the ratio of 2. The value of $CO_2$ conversion was the highest at the 5wt% of Ni loading on ZSM-5 catalyst. A part of cokes deposited on the catalysts diminished when only $CO_2$ gas or water steam flowed into the reactor. The coke deposited on the catalysts was very reactive and it may be an important intermediate for the carbon dioxide reforming reaction.

• Wind and Structures
• /
• v.27 no.1
• /
• pp.11-27
• /
• 2018

The straight-cone steel cooling tower is a novel type of structure, which has a distinct aerodynamic distribution on the internal surface of the tower cylinder compared with conventional hyperbolic concrete cooling towers. Especially in the extreme weather conditions of strong wind and heavy rain, heavy rain also has a direct impact on aerodynamic force on the internal surface and changes the turbulence effect of pulsating wind, but existing studies mainly focus on the impact effect brought by wind-driven rain to structure surface. In addition, for the indirect air cooled cooling tower, different additional ventilation rate of shutters produces a considerable interference to air movement inside the tower and also to the action mechanism of loads. To solve the problem, a straight-cone steel cooling towerstanding 189 m high and currently being constructed is taken as the research object in this study. The algorithm for two-way coupling between wind and rain is adopted. Simulation of wind field and raindrops is performed with continuous phase and discrete phase models, respectively, under the general principles of computational fluid dynamics (CFD). Firstly, the rule of influence of 9 combinations of wind sped and rainfall intensity on flow field mechanism, the volume of wind-driven rain, additional action force of raindrops and equivalent internal pressure coefficient of the tower cylinder is analyzed. On this basis, the internal pressures of the cooling tower under the most unfavorable working condition are compared between four ventilation rates of shutters (0%, 15%, 30% and 100%). The results show that the 3D effect of equivalent internal pressure coefficient is the most significant when considering two-way coupling between wind and rain. Additional load imposed by raindrops on the internal surface of the tower accounts for an extremely small proportion of total wind load, the maximum being only 0.245%. This occurs under the combination of 20 m/s wind velocity and 200 mm/h rainfall intensity. Ventilation rate of shutters not only changes the air movement inside the tower, but also affects the accumulated amount and distribution of raindrops on the internal surface.

• Clean Technology
• /
• v.12 no.3
• /
• pp.113-127
• /
• 2006

Waste lubricating oil(WLO)s have been recycled as energy source through direct fuel in cement kilns and fossil power plants, or as fuel oils, or re-refined lubricating base oils. In our country, they have been recycled as low grade fuel oil through chemical treatment process. In 2003, extended producer responsibility (EPR) system was adopted from deposit system on sale of lubricating oils in order to promote their recycleing rate. However, our recycling rate of WLOs have been stagnant(below 70%) for last 5 years. And there has been no research work on recycling of WLOs as re-refined base oil until now in this country. Stabilization technology of thermally cracked oils to reduce tar and malodor and to improve their color for production of high grade fuel oil, and a novel process production of high grade re-refined lubricating base oil from WLOs have been developed and commercialized recently in Canada and U.S.A., respectively. Several countries like Australia, Italy, Germany and U.S.A., etc. are encouraging recycling companies to recycle WLOs as re-refined lubricating oil by giving greater subsidies or benefits compared to other recycling methods. They also adopt a policy to purchase re-refined lubricating oil preferentially in the federal or local governments and to recommend consumers to purchase it willingly. Based on the facts that several advanced countries have adopted a policy to recycle WLOs as re-refined base oil for saving of petroleum resource and reduction of environmental pollution, it is right time to be considered that our present policy for recycling of WLOs should be reevaluated and the new policy of their environmental-friendly and sustainable recycling should be established.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.12
• /
• pp.157-166
• /
• 2019

Globally, various disasters such as typhoons, floods, earthquakes, fires, explosions have caused work to be halted. If there is a large-scale disaster at public institutions in charge of major national affairs and their works are interrupted, not only will there be property damage, but there will also lead to a decline in national credibility and direct and indirect impacts on the people. Therefore, it is necessary to ensure continuity of operation by minimizing the interruption period of critical operations due to disasters. Overseas advanced countries such as the United States and Japan developed guidelines for Continuity of Operation (COOP) to prevent unexpected work disruptions caused by disasters. Recognizing the necessity of COOP in South Korea, a relevant law has been newly established in 「the Framework Act on the Management of Disasters and Safety」 to enable public institutions to establish the COOP in response to this situation. In this study, the definition, the necessity and overseas cases of COOP were investigated and described. Using the templates developed by these results, operational impact analysis, risk assessment, operational continuity strategies and operational continuity procedures were applied to "A" City Hall in Gyeonggi-do province and those results were described. The objective of this study is to substantially contribute to the introduction of COOP to local governments through their pilot application and implications of COOP.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.80-97
• /
• 2010

With the hubbing strategy, construction of "Incheon Airport Railroad(AREX)" was proceeded to expand the accessibility at the level of airports in rivalry like Kansai and Chek Lap Kok. At the present 1st phase which routes from Incheon Airport to Kimpo Airport is opened March 2007. 2nd phase which is planned from Kimpo Airport to Seoul station will be opened at the end of October 2010. But the accessibilty to AREX is delinquent because it is connected only in Seoul station and the maximum operation speed is 110km/h which downgrade the time competitiveness with airport limousine. In addition, transfering of user is necessary to access to AREX from Kyungbu KTX. With these reasons, travel demand in 1st phase section is low(7%). According to reestimation of travel demand, demand analysis result compared with convention condition is insufficient, so required annual average government grant-in-aid amounts to 200 billions won, and it is right time to develop the method for revitalization of Incheon airport railroad. In this paper, facilities plan and operating plan to make new travel demand by speed-up which is able through substitution train now running with high speed train(EMU, 180km/h) and direct connection of KTX, will be suggested. This will contribute to offering high speed railroad service to customers and the reduction of government grant-in-aid by way of demand expansion.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1603-1614
• /
• 2010

As the Kyoto protocol and Bali road-map, our country is expected to be included to the emission reduction controlled country of greenhouse gas, so we are now urgent situation to take an action in the level of government. In this research, environment friendly rail logistics and combined transport were treated to meet with the green growth policy of our government. Major problems of Ui-wang ICD suggested in this research are short of yards, unutilized public CY, inconvenience use by non-share holders. It is necessary to improve rail logistic infrastructure, that is, additional expansion of yard, direct operation by KORAIL and regular unloading system are needed. such improvement can not be solved just by the endeavor of business body. Rail logistic infra & Integrated freight terminal has a tendency of SOC, which require tremendous amount of investment, so there are some limit in doing by private sector itself, now it's time to do by the government level. The improvement of rail logistic infrastructure in the level of government is possible by the policy of environment friendly green logistic support which is related with Logistic Policy Basic Law, so government should prepare detailed directives to activate Integrated freight terminal.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.1
• /
• pp.41-48
• /
• 2008

Enhanced machine reliability has dramatically reduced the rate and number of railway accidents but for further reduction human error should be considered together that accounts for about 20% of the accidents. Therefore, the objective of this study was to suggest a new taxonomy of performance shaping factors (PSFs) that could be utilized to identify the causes of a human error associated with railway accidents. Four categories of human factor, task factor, environment factor, and organization factor and 14 sub-categories of physical state, psychological state, knowledge/experience/ability, information/communication, regulation/procedure, specific character of task, infrastructure, device/MMI, working environment, external environment, education, direction/management, system/atmosphere, and welfare/opportunity along with 131 specific factors was suggested by carefully reviewing 8 representative published taxonomy of Casualty Analysis Methodology for Maritime Operations (CASMET), Cognitive Reliability and Error Analysis Method (CREAM), Human Factors Analysis and Classification System (HFACS), Integrated Safety Investigation Methodology (ISIM), Korea-Human Performance Enhancement System (K-HPES), Rail safety and Standards Board (RSSB), $TapRoot^{(R)}$, and Technique for Retrospective and Predictive Analysis of Cognitive Errors (TRACEr). Then these were applied to the case of the railway accident occurred between Komo and Kyungsan stations in 2003 for verification. Both cause decision chart and why-because tree were developed and modified to aid the analyst to find causal factors from the suggested taxonomy. The taxonomy was well suited so that eight causes were found to explain the driver's error in the accident. The taxonomy of PSFs suggested in this study could cover from latent factors to direct causes of human errors related with railway accidents with systematic categorization.