• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1257-1260
• /
• 2007

A single-wall carbon nanotube (SWNT) transparent conductive film (TCF) was fabricated using a simple inkjet printing method. The TCF could be selectively patterned by controlling the dot size to diameters as small as $34\;{\mu}m$. In this repeatable and scalable process, we achieved 71% film transmittance and a resistance of 900 ohm/sq sheet with an excellent uniformity, about ${\pm}\;5%$ deviation overall. Inkjet printing of SWNT is substrate friendly and the TCF is printed on a flexible substrate. This method of fabrication using direct printing permits mass production of TCF in a large area process, reducing processing steps and yielding low-cost TCF fabrications on a designated area using simple printing.

• International Journal of Advanced Culture Technology
• /
• 제4권2호
• /
• pp.7-18
• /
• 2016

The first D2C-era web-real variety show in Korea was broadcast via tvN of CJ E&M. The web-real variety program 'SinSeoYuGi' accumulated 54 million views, along with 50 million views at the Chinese portal site QQ. This study carries out an analysis using text mining that extracts portal site blogs, twitter page views and associative terms. In addition, this study derives viewers' response by extracting key words with opinion mining techniques that divide positive words, neutral words and negative words through customer sentiment analysis. It is found that the success factors of the web-real variety were reduced in appearance fees and production cost, harmony between actual cast members and scenario characters, mobile TV programing, and pre-roll advertising. It is expected that web-real variety broadcasting will increase in value as web contents in the future, and be established as a new genre with the job of 'technical marketer' growing as well.

• 한국전기전자재료학회논문지
• /
• 제17권5호
• /
• pp.515-520
• /
• 2004

We report on the development of a Piezoelectric valvc that is designed to have a high reliability for fluid control systems, such as mass flow control, transportation and chemical analysis. The valve was fabricated using a MCA(multilayer ceramic actuator), which has a low consumption power, high resolution and accurate control. The fabricated valve is composed of MCA, a valve actuator die and an seat die. The design of the actuator dic was done by FEM(finite element method) modeling, respectively. And, the valve seat die with 6 trenches was made. and the actuator die, which possible to optimize control to MCA, was fabricated. After Si-wafer direct bonding between the seat die and the actuator die, MCA was also anodic bonded to the scat/actuator die structure. PDMS(poly dimethylsiloxane) sealing pad was fabricated to minimize a leak-rate. It was also bonded to scat die and stainless steel package. The flow rate was 9.13 sccm at a supplied voltage of 100 V with a 50 % duty ratio and non-linearity was 2.24 % FS. From these results, the fabricated MCA valve is suitable for a variety of flow control equipments, a medical bio-system, semiconductor fabrication process, automobile and air transportation industry with low cost, batch recess and mass production.

• 한국가구학회지
• /
• 제14권1호
• /
• pp.35-45
• /
• 2003

It has shown that the investment on the new products have a direct influence on the price of manufactured goods. This brings about a point, which has been a common problem for many Korean enterprises. That is Korean products can only its international competitiveness from the price, not quality. Our industry has shown its movement from producing cheap, low quality products to creating somewhat more advanced and higher qualify products. However the industry cannot avoid the financial burden from the investment. Just like the title of this article, for existing the 3D-MODELING, the 3D-CAD is existed first has immediate effect on the many developing processes, such as planning a product, designing, and producing. The development of the furniture design in the future will be done in the same way as this article presents. This will have a great effect on the overall productivity. (Time, cost, efficiency and etc). The simulation experiment on this article is based on the idea of development of industry, forms the immediate constituent for the prediction related to the production development, marketing and the trend. Which means, this will play an important part where companies achieve satisfaction from the marketing part and the economy.

• 한국분무공학회지
• /
• 제14권4호
• /
• pp.153-162
• /
• 2009

The use of inedible vegetable oils as substitute for diesel fuel in compression ignition engine is of significance because of the great need for edible oil as food, and the reduction of biodiesel production cost etc. Jatropha curcas oil which is a leading candidate for the commercialization of inedible vegetable oils is selected in this study for reviewing the application in CI engine as an alternative fuel. The important properties of jatropha oil (JO) and JO biodiesel are summarized from the various sources in the literature. It is found that five different types of alternative fuel from JO such as neat JO, JO blends with diesel or other fuel, neat JO biodiesel, JO biodiesel blends with diesel or other fuel and degummed JO were extensively examined in the diesel engine. Two different application types of alternative fuels from JO such as preheating and dual fuelling were also tested, It should be pointed out that most of these applications are limited to single cylinder conditions. The systematic study for the selection of effective application method is required. It is clear that the blends of JOME and diesel can replace diesel fuel up to 10% by volume for running the existing common rail direct injection systems without any durability problems. The systematic assessment of spray characteristics of different types of JO and its derivatives for use as diesel engine fuel is also required.

• 한국진공학회지
• /
• 제4권S2호
• /
• pp.106-114
• /
• 1995

Direct implantation of metallic ion species has been employed in surface processing of industrial components and tools with very encouraging improvements in recent years. In spite of high technicla effectiveness, this new surface processing technique has not been extensively accepted by industries mainly because of high cost(capital and operating) compared with other competitive surface processing techniques. High current and large implantation area with eliminating the mass analyzer and the beam-scanning unit make metal vapor vacuum are(MEVVA)source ion implantation versatile, simple and cheap to operate and well suited to commercial surface processing. In this paper, the recent development of MEVVA source ion implantation technique ar Beijing Normal University has been reviewed and the results of production trials of several industrial components and tools implanted by MEVVA source ion implantation have been presented and discussed.

• 한국표면공학회지
• /
• 제52권5호
• /
• pp.258-264
• /
• 2019

Assembling heterostructures by combining dissimilar oxide semiconductors is a promising approach to enhance charge separation and transfer in photoelectrochemical (PEC) water splitting. In this work, the CuO nanorods array/$Cu_2O$ thin film bilayered heterostructure was successfully fabricated by a facile method that involved a direct electrodeposition of the $Cu_2O$ thin film onto the vertically oriented CuO nanorods array to serve as the photoelectrode for the PEC water oxidation. The resulting copper-oxide-based heterostructure photoelectrode exhibited an enhanced PEC performance compared to common copper-oxide-based photoelectrodes, indicating good charge separation and transfer efficiency due to the band structure realignment at the interface. The photocurrent density and the optimal photocurrent conversion efficiency obtained on the CuO nanorods/$Cu_2O$ thin film heterostructure were $0.59mA/cm^2$ and 1.10% at 1.06 V vs. RHE, respectively. These results provide a promising route to fabricating earth-abundant copper-oxide-based photoelectrode for visible-light-driven hydrogen generation using a facile, low-cost, and scalable approach of combining electrodeposition and hydrothermal synthesis.

• 한국산림과학회지
• /
• 제97권3호
• /
• pp.348-356
• /
• 2008

향후 FTA 협상 추진 등으로 인해 밤 수입량이 계속 증가될 것으로 예상됨에 따라 국내 밤나무 재배농가의 밤나무 재배경영에 어려움이 예상된다. 따라서 본 연구의 목적은 국내 밤 생산량에 대한 생산 조절이 필요함에 따라 밤 생산조절에 참여하는 농가의 소득감소분에 대해 보상기준 및 방안을 수립하기 위한 것이다. 이를 위해 본 연구에서는 우리나라 밤나무 주산단지인 경남 전남 충남지역의 밤나무 재배농가(총 133호)를 조사하였다. 그 결과 밤 생산조절 직접지불제 도입에 대한 참여의향 및 밤나무 수령별 생산량 및 작업공정 기준, 노령목 폐원보상에 대한 기준을 제시하였다. 밤나무 노령목 벌채작업공정을 조사하여 밤 생산조절에 참여하는 농가(밤나무 노령목 폐원 희망자)의 소득감소분에 대한 보상기준 및 구체적인 실행방안을 제시 하였다. 폐원 시 작업공정은 Ha당 하루에 벌목 및 조제를 하는데 1인이 30본을 시행하고, 포크레인 상하차(작업로 개설포함)로 5대, 상하차 보조 인력이 2인, 1톤트럭이 6.94대 사용되었다. 폐원 시 경관용이나 환경보전용으로 조림할 경우 밤나무 노령목 정비 사업비와 3년간 순소득감소분에 대해 지원한다.

• Composites Research
• /
• 제27권6호
• /
• pp.254-259
• /
• 2014

고품질의 복합재료를 생산할 수 있는 Autoclave 공정의 단점인 긴 성형공정과 높은 생산비용을 보완하여 본 연구에서는 Autoclave 공정을 대체할 수 있는 Pressure press 공정과 장치를 개발하였다. Autoclave 공정의 가장 큰 특징이라고 할 수 있는 진공, 가압 공정을 금형 내부에 공간 설계를 통해 가능하게 하였고, 금형 내부 공기압이 소실되지 않도록 유압 press를 이용하여 가압장치를 설계하고 금형을 밀폐하였다. 가압장치에서는 가열과 냉각이 가능하게 하여 금형에 직접 온도를 전달할 수 있게 하였다. Autoclave 공정에 비해 내부 공간이 축소되어 가열 시간과 공기압 충전시간이 단축되었고 설비규모가 축소되어 초기설치비가 절감되었다. 가열방식에 따른 공정의 분석을 위해 V 자 형태의 금형을 제작하여 spring-back 현상 발생여부와 정도를 측정하고 Autoclave 공정과 비교하였으며, 복합재료 성형 시 금형의 온도를 측정하여 소재에 전달되는 각 부분의 온도를 관찰하였다. 그리고 같은 조건에서 Autoclave 공정과 Pressure press 공정으로 성형된 복합재료의 섬유 체적율을 비교하여 기계적 특성을 예측하였다.

• 농업과학연구
• /
• 제25권2호
• /
• pp.293-309
• /
• 1998

This study is aimed at identifying the decision making criteria as B/C ratio, IRR and NPV based on the expected benefits and costs of the land utilization and promotion projects which have implemented to improve agricultural structure under WTO system. To carry out the objectives of the study, Sinseok project area located at Dangjin district, Chungnam province was selected. Sinseok project area has 306.2 ha of paddy area with 172 farm households. The project area will be operated by the 33 specialized farm households after completion of the project which will have 20 years of economic life. After completion of the project, farm size will be increased from 1.8ha to 9.3ha. Land intensity of the project area will be increased by 10%. Increase of land productivity and cost saving due to the labor saving technology as farm mechanization will be expected. According to the survey results, the annual amount of production cost savings per farm was estimated 3.884million won and increased total farm income was expected about 43.8million won per year. The total expexted project benefits was expected 174million won per year. The project costs to promote land utilization and structural change consisted of handling charges, and direct payment for land movility. The decision making criteria representing economic feasibility of the project such as B/C ratio, NPV and IRR were estimated 2.49, 483million won and 30% respectively when the cut-off rate was taken into account 10%. In conclusion, the land utilization and promotion project proppeled by the Korean Government under the agricultural land law is considered economically feasible from the view points of expected project benefits and costs. Accordingly the project have to be implemented more strongly under the G't financial support considering WTO and UR negociation which were aimed at achieving the free trade and improvement of international competitiveness of farm products.