• 소성∙가공
• /
• 제4권3호
• /
• pp.233-244
• /
• 1995

Rolling force in the direct rolling(or twin-roll strip continuous casting) process fo semi-solid material has been computed using rigid-viscoplastic finite element method. Temperature distributions for calculations of rolling force and roll deformation are obtained from thermofluid analysis. Three dimensional roll deformation analysis has also been performed by using commercial package ANSYS. From the results, behavior of metal flow, rolling force and roll deformation have been investigated according to the process conditions of semi-solid direct rolling.

• Spatial Information Research
• /
• 제13권1호
• /
• pp.31-41
• /
• 2005

GPS/INS에 의한 항공사진측량을 이용하려면 사진촬영과 동시에 획득한 외부표정요소의 결과를 도화$\cdot$편집 작업에 실제로 적용해 보아야 한다. 도화성과의 검증작업은 GPS/INS의 결과를 이용하여 수치지도의 제작시 가장 중요한 공정에 해당한다 이를 위하여 기존 AT성과에 의하여 제작된 해석도화원도를 기준으로 본 연구에서 제시한 AT성과별, 도화기별, 표정방식별로 수행한 도화결과를 비교하였다 AT성과와 표정방법에 상관없이 해석도화와 수치도화의 평면과 표고의 오차를 비교하여 보면, 해석도화가 수치도화보다 우수한 결과를 보여주며, 또한 평면오차가 표고오차보다 더 크게 나타남을 알 수 있었다. GPS/INS AT의 Direct 표정의 경우 InDirect 표정방법에 비해 3배 이상의 오차가 발생하였으나 모든 경우의 결과가 허용오차를 충족하고 있으므로 축척 1:5000에서는 GPS/INS AT를 이용한 표정과 도화작업은 매우 효율적으로 수행될 수 있음을 알 수 있었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.171-171
• /
• 2012

In this study, we fabricated the high-brightness AlGaInP-based red light emitting diodes (LED)s using by direct printing technique and inductive coupled plasma (ICP) reactive ion etching (RIE). In general, surface roughening was fabricated by wet etching process to improve the light extraction efficiency of AlGaInP-based red LED. However, a structure of the surface roughening, which was fabricated by wet etching, was tiled cone-shape after wet etching process due to crystal structure of AlGaInP materials, which was used as top-layer of red LED. This tilted cone-shape of surface roughening can improve the light extraction of LED, but it caused a loss of the light extraction efficiency of LED. So, in this study, we fabricated perfectly cone shaped pattern using direct printing and dry etching process to maximize the light extraction efficiency of LED. Both submicron pattern and micron pattern was formed on the surface of red LED to compare the enhancement effect of light extraction efficiency of LEDs according to the diameter of sapphire patterns.After patterning process using direct printing and ICP-RIE proceeded on the red LED, light output was enhanced up to 10 % than that of red LED with wet etched structure. This enhancement of light extraction of red LED was maintained after packaging process. And as a result of analyze of current-voltage characteristic, there is no electrical degradation of LED.

• International Journal of Advanced Culture Technology
• /
• 제3권2호
• /
• pp.100-109
• /
• 2015

Environmental problems from petroleum-based plastic wastes have been rapidly increasing in recent years. The alternative solution is focus on the development of environmental friendly plastic derived from renewable resource. Poly(lactic acid) (PLA) is a biodegradable polymer synthesized from biomass having potential to replace the petroleum-based non-degradable polymers utilizations. PLA can be synthesized by two methods: (1) ring-opening of lactide intermediate and (2) direct polycondensation of lactic acid processes. The latter process has advantages on high yields and high purity of polymer products, materials handling and ease of process treatments. The polymerization process of PLA synthesis has been widely studied in a laboratory scale. However, the mass scale production using direct polycondensation of lactic acid has not been reported. We have investigated the kinetics and scale-up process of direct polycondensation method to produce PLA in a pilot scale. The order of reaction is 2 and activation energy of lactic acid to lactic acid oligomers is 61.58 kJ/mol. The pre-polymer was further polymerized in a solid state polymerization (SSP) process. The synthesized PLA from both the laboratory and pilot scales show the comparable properties such as melting temperature and molecular weight. The appearance of synthesized PLA is yellow-white solid powder.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.818-824
• /
• 2019

In this study, the direct water quenching technique is applied to validate the applicability of direct water quenching as a cooling method in the hot stamping process of 3.2 mm thick boron steel sheet. Cooling performance of conventional die quenching and direct water quenching is compared. Higher cooling rate is obtained by hot stamping with direct water quenching compared to die quenching. As the flow rate of cooling water increases, the cooling rate increases, and a high cooling rate of 71 ℃/s is achieved under flow rate conditions of 0.8 L/min. Through direct water quenching, the cooling time required for sufficient cooling of the sheet is reduced. Full martensitic microstructure is obtained under flow rate condition of 0.8 L/min. Hardness increases with increasing flow rate. From these results, it is verified that the direct water quenching is applicable to the hot stamping of thick boron steel sheet.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.81-84
• /
• 2001

An inverse finite element approach is employed for more capability to design the optimum blank shape from the desired final shape with small amount of computation time and effort. In some drawing or stamping simulation with inverse method, it is difficult to apply inverse scheme due to the large aspect ratio or steep vertical angle of inclination. The reason is that initial guesses are hard to make out with present method for those cases. In this paper, a direct mesh marring scheme to generate initial guess on the sliding constraint surface described by finite element patches is suggested for one step inverse analysis to calculate initial blank shape. Radial type mapping is adopted for the simulation of rectangular cup drawing process with large aspect ratio and parallel type mapping for the simulation of S-Rail forming process with steep vertical angle of inclination.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.169-174
• /
• 2001

This paper reports on the development of high aspect ratio structure and 3-D integrated process for MEMS-based micro gas turbines. To manufacture high aspect ratio structures, Deep Reactive Ion Etching (DRIE) process have been developed and optimized. Specially, in this study, structures with aspect ratios greater than 10 were fabricated. Also, wafer direct bonding and Infra-Red (IR) camera bonding inspection systems have been developed. Moreover, using glass/silicon wafer direct bonding, we optimized the 3-D integrated process.

• 한국세라믹학회지
• /
• 제21권2호
• /
• pp.165-173
• /
• 1984

It is desirable to establish reliable synthetic methods for electro-ceramic materials. To synthesize $SrTiO_3$ in this study direct solid state reactions and wet chemical processes were used. Previous study of $SrTiO_3$ synthesis included oxalated-method($SrTiO(C_2O_4)_2$.$4H_2O$) co-precipitation$(SrCO_3+TiO(OH)_2)$ and direct solid state reaction$(SrCO_3+TiO(OH)_2)$ The methods in question lead to intermediate inclusion during the reactions and less controllable in particle sizes of $SrTiO_3$. To obtain highly pure $SrTiO_3$ so-called "direct wet process method" was added in this investigation. In the study the "direct wet process" was for the first time applied to synthesize chemically pure and fine particle $SrTiO_3$. $SrCl_2$ and $TiCl_4$<\ulcornerTEX> at KOH solution at room temperature to 10$0^{\circ}C$ precipitated $SrTiO_3$ The particle size increased as temperature increased.mperature increased.

• 한국식생활문화학회지
• /
• 제24권6호
• /
• pp.721-727
• /
• 2009

In this study, the current status of the business foodservice industry, evaluation of leftover food and customer satisfaction with foodservice at direct operation and consignment foodservice businesses in Chungbuk were examined. This study has managerial implications in terms of improving the quality and effectiveness of the business operation of the foodservice industry. The sample size of this study included 800 customers who use foodservices provided by 11 selected businesses including 6 direct operation and 5 consignment foodservice businesses. From these 800 customers, a total of 692 were used (direct operation foodservice (n=361) and consignment foodservice (n=331) businesses). The results were as follows; First, as for the main reasons for using the employee restaurants in types of direct operation and consignment foodservice business, 'the close location' had the high percentage. Approximately 41% of respondents were not satisfied with the foodservice in the employee restaurants. Second, leftover food from consignment foodservices was higher than that for direct operation foodservices. Third, there were significant differences in customer satisfaction with five areas of foodservice between the two types of food service businesses: food, sanitation, feeding environment, mealing process and information and service. Customer satisfaction in the direct operation foodservice was higher than that of the consignment foodservice. In terms of the satisfaction level of foodservices, mealing process was the highest, followed by sanitation, food, and information and service in the direct operation and consignment foodservice businesses. Overall, satisfaction with the business foodservice was affected by the customers' satisfaction in five areas of foodservices (e.g., food, sanitation, feeding environment, mealing process, information and service). Especially, 'food' and 'information and service' were important areas for determining overall customer satisfaction with foodservice. In addition, the overall satisfaction was negatively correlated with the quantity of leftover food in the direct operation and consignment foodservice business.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.1-8
• /
• 2016

Generally, electrical circuits are fabricated as Printed Circuit Boards (PCBs) and mounted on the casing of the product. Additionally, this requires many other parts and some labor for assembly. Recently, molding technology has increasingly been applied to embed simple circuits in plastic casing. The technology is called a Molded Interconnected Device (MID). By using this technology, PCB fabrication can be replaced by molding, and much of the corresponding assembly process for PCBs can be eliminated if the circuit is simple enough for molding. Furthermore, as the improvement of conductive materials and printing technologies of simple electric circuits can be printed directly on the casing part, this also reduces the complexity of the product design and production cost. Therefore, this paper introduces a new MID fabrication process using direct 3D printing technology. Additionally, it is applied to an automotive part of a cruise control switch. The methodology and design are shown.