• Journal of Families and Better Life
• /
• v.30 no.2
• /
• pp.75-86
• /
• 2012

The purpose of this study was to investigate the structural relationships school-aged children and related variables. For this study, the respondents were 704 children in elementary schools in the areas of Gyeongsan-Si and Daegu-Si. The questionnaires and psychological tests used in this study surveyed the following concepts: suicide ideation, social support, self-esteem and the scale of depression. The collected data were analyzed with AMOS 19.0, a statistical program for structural equation modeling, to estimate the hypothesized structural equation model. The results were as follows: First, self-esteem, - and depression as perceived by children were found to affect their suicide ideation directly. Second, parental support and teacher support as perceived by children were found to affect children's depression directly. Third, parental support, teacher support, and the support of friend's as perceived by children were found to affect-children's self-esteem directly. Last, parental support and, teacher's support did not show direct effect on children's suicide ideation, though these factors had an indirect effect on suicide ideation through the children's self-esteem and depression. Finally, teacher's support did not direct effectly children's suicide ideation, whereas it had an having indirect effect on suicide ideation through the children's self-esteem.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.5
• /
• pp.22-33
• /
• 2011

An induction motor operated with a conventional direct self controller(DSC) shows a sluggish response during startup and under changes of torque command. Fuzzy logic controller(FLC) is used in conjection with DSC to minimize these problems. A FLC chooses the switching states based on a set of fuzzy variables. Flux position, error in flux magnitude and error in torque are used as fuzzy state variables. Fuzzy rules are determinated by observing the vector diagram of flux and currents. This paper proposes hybrid fuzzy controller for direct torque control(DTC) of induction motor drives. The speed controller is based on adaptive fuzzy learning controller(AFLC), which provide high dynamics performances both in transient and steady state response. Flux position, error in flux magnitude and error in torque are used as FLC state variables. The speed is estimated with model reference adaptive system(MRAS) based on artificial neural network(ANN) trained on-line by a back-propagation algorithm. This paper is controlled speed using hybrid fuzzy controller(HFC) and estimation of speed using ANN. The performance of the proposed induction motor drive with HFC controller and ANN is verified by analysis results at various operation conditions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.463-474
• /
• 2003

In this research, adult women＇s shoulder types were Classified through direct and indirect measurements to present a judging individual body size according to the type. Also, regression formula by shoulder types were calculated and presented the basic bodice pattern. The results were as follows: 1. The result of factor analysis indicated that 6 factors were extracted through factor analysis and those factors comprised 66.1 to of total variance. 2. By using factor scores, cluster analysis was carried out and subject were classified into 5 clusters. Type 1 was the inclined shoulders, wide shoulders and passive posture. Type 2 was the front type shoulders and active posture. Type 3 was the thick shoulders and back type shoulders. Type 4 was the narrow shoulders. Type f was the drooped shoulders, thin shoulder and sway posture. 3. The body types of individuals were judged by discriminant analysis. 4. After setting 4 items such as the bust girth, posterior waist length, neck base girth and waist girth as representative items and regression formulas were presented. the superiority of the final basic bodice patterns were demonstrated by high approval rate of the subjects who participated in testing.

• Convergence Security Journal
• /
• v.14 no.2
• /
• pp.17-24
• /
• 2014

Form of backdoor penetration attacks "trapdoor" penetration points to bypass the security features and allow direct access to the data. Backdoor without modifying the source code is available, and even code generation can also be modified after compilation. This approach by rewriting the compiler when you compile the source code to insert a specific area in the back door can be due to the use of the method. Defense operations and the basic structure of the backdoor or off depending on the nature of the damage area can be a little different way. This study is based on the diagnosis of a back door operating mechanism acting backdoor analysis methods derived. Research purposes in advance of the attack patterns of malicious code can respond in a way that is intended to be developed. If we identify the structures of backdoor and the infections patterns through the analysis, in the future we can secure the useful information about malicious behaviors corresponding to hacking attacks.

• Fashion & Textile Research Journal
• /
• v.22 no.2
• /
• pp.222-232
• /
• 2020

This study analyzes changes in the knees, hips, and hip joint length according to the different angles of bending knees by 45°, 90°, and 135° respectively for knees, hips, and the hip joint that have high fracture rates when falling down. The research subjects were 10 elderly women in their 60s (or older) that obtain data collected through direct measurement. For analysis, the study drew a diagram of elongation and shrinkage based on changes and change rate from a straight posture (0°) and conducted a statistical analysis on differences of body surface length by zone according to movements. The more the knees were bent, the vertical surface length in front of the knees, the horizontal surface length above the knee line, the horizontal body surface length below the knee lines on the back, and the vertical surface lengths between front side lines and the side lines increased; however, the vertical surface length on the back decreased. For the hip joint, the difference in the vertical surface length was more distinctive when compared to the horizontal. Finally, the horizontal surface length increased below the hips and the vertical surface length increased in most areas except the sidelines and the front. The result of the change in body surface length according to the movements of this study can be utilized in the development of the motion-variable protector.

• Computers and Concrete
• /
• v.3 no.4
• /
• pp.213-233
• /
• 2006

Over the past years techniques for non-linear analysis have been enhanced significantly via improved solution procedures, extended finite element techniques and increased robustness of constitutive models. Nevertheless, problems remain, especially for real world structures of softening materials like concrete. The softening gives negative stiffness and risk of bifurcations due to multiple cracks that compete to survive. Incremental-iterative techniques have difficulties in selecting and handling the local peaks and snap-backs. In this contribution, an alternative method is proposed. The softening diagram of negative slope is replaced by a saw-tooth diagram of positive slopes. The incremental-iterative Newton method is replaced by a series of linear analyses using a special scaling technique with subsequent stiffness/strength reduction per critical element. It is shown that this event-by-event strategy is robust and reliable. First, the model is shown to be objective with respect to mesh refinement. Next, the example of a large-scale dog-bone specimen in direct tension is analyzed using an isotropic version of the saw-tooth model. The model is capable of automatically providing the snap-back response. Subsequently, the saw-tooth model is extended to include anisotropy for fixed crack directions to accommodate both tensile cracking and compression strut action for reinforced concrete. Three different reinforced concrete structures are analyzed, a tension-pull specimen, a slender beam and a slab. In all cases, the model naturally provides the local peaks and snap-backs associated with the subsequent development of primary cracks starting from the rebar. The secant saw-tooth stiffness is always positive and the analysis always 'converges'. Bifurcations are prevented due to the scaling technique.

• BMB Reports
• /
• v.41 no.1
• /
• pp.29-34
• /
• 2008

The aim of this study was to determine whether single nucleotide polymorphisms (SNP) in the beef cattle adipocyte fatty-acid binding protein 3 and 4 (FABP3 and FABP4) genes are associated with carcass weight (CW) and back fat thickness (BF) of beef cattle. By direct DNA sequencing in 24 unrelated Korean native cattle, we identified 20 SNPs in FABP3 and FABP4. Among them, 10 polymorphic sites were selected for genotyping in our beef cattle. We performed SNP, haplotype and linkage disequilibrium studies on 419 Korean native cattle with the 10 SNPs in the FABP genes. Statistical analysis revealed that 220A>G (I74V) and 348+303T>C polymorphisms in FABP4 showed putative associations with BF traits (P=0.02 and 0.01, respectively). Our findings suggest that the polymorphisms in FABP4 may play a role in determining one of the important genetic factors that influence BF in beef cattle.

• Composites Research
• /
• v.27 no.6
• /
• pp.254-259
• /
• 2014

In this study, a device and pressure press process that is able to substitute autoclave process is developed. This process complements disadvantages of autoclave process which are long process-time and high production cost. The developed device provides air pressure as well as the vacuum which are greatest feature of autoclave process. The device is sealed using hydraulic pressure to keep the air pressure inside the mold. The transfer of the heat is designed to be direct. The heating and pressure charging time are decreased by reducing the interior space. Tooling cost is reduced dramatically compared to autoclave process. Spring-back phenomenon is measured and compared. The temperatures of several parts of the mold during molding are measured. The fiber volume fraction of the parts molded by autoclave process and by the developed process are compared.

• Journal of Fashion Business
• /
• v.19 no.4
• /
• pp.92-108
• /
• 2015

This study aimed at developing a down jacket prototype that utilized sunlight as an alternative energy source with no air pollution. The jacket is filled with flexible solar panels and has a heat-generating function and LED function. In this study, three smart down jacket prototypes were developed, and the jacket's capabilities were demonstrated through the thermal effect on the performance test. The typical output voltage of the flexible solar panels was 6.4V. By connecting the 2 solar cell modules in series, the final output voltage was 12.8V. A battery charge regulator module was used the KA 7809 (TO-220) of 9V. Three heating pads were to be inserted into the belly of the jacket as direct thermal heating elements, and the LED module was configured, separated by a flash and an indicator. The smart down jacket was designed to prevent damage to the down pack without the individual devices' interfering with the human body's motion. Because this study provides insulation from extreme cold with a purpose, the jacket was tested for heat insulation properties of non-heating, heating on the back, heating on the abdomen, and heating on both the back and abdomen in a sitting posture in a static state. Thermal property analysis results from examining the average skin temperature, core temperature, and the temperature and humidity within clothing showed, that placing a heating element in one place was more effective than distributing the heating elements in different locations. Heating on the back was the most effective for maintaining optimal skin temperature, core temperature, and humidity, whereas heating on the abdomen was not effective for maintaining optimal skin temperature, core temperature, or humidity within clothing because of the gap between the jacket and the body.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.95-108
• /
• 2003

The purposes of this study were to analyze the muscle activities and the characteristics of muscle recruiting patterns of upper trunk for Ssirum dutguri technique using three top-ranked elite Ssirum players. The EMG technique was used to record muscle activities of both right and left sides of latissimus dorsi, biceps brachii, and erector spinae. Six surface electrodes were placed on the surface of the selected muscles and one ground electrode was also attached on the back of neck(C7). One video camera was also used to record the Ssirum motion to define 4 events and 3 phases for further analysis. The raw EMG data were filtered with band pass filter (50-400 Hz) to remove artifacts and then low pass filtered (4 Hz) to find the linear envelope which resemble muscle tension curve. This filtered EMG data were normalized to MVIC for the purpose of comparion between the subjects. The results were indicated that each subject with different physical characteristics showed very different muscle activity patterns. Although Ssirum dutguri is considered as foot technique the player grasped opponent's satba(belt) with both hands when they play. Because of this reason, activities of upper trunk muscles were relatively high. However, direct comparison between upper and lower body muscles was not possible due to the lack of the data in present study. Interestingly, all threes subjects showed that erector spinae muscle activity was comparatively higher than those of latissimus dorsi and biceps brachii. This implies to reinforce back muscle as a routine of training to improve performance or to prevent back injury.