• Journal of the Korean Electrochemical Society
• /
• v.11 no.1
• /
• pp.1-5
• /
• 2008

A Pt-layer was deposited on the anode side of a Nafion membrane via a sputtering method in order to reduce methanol crossover in a direct methanol fuel cell (DMFC). The methanol permeation and the proton conductivity through the modified membranes were investigated. The performances of the direct methanol fuel cell were also tested using single cells with a Nafion membrane and the modified membranes. The Pt-layers on the membrane blocked both methanol crossover and proton transport through the membranes. Methanol permeability and proton conductivity decreased with an increase of the platinum layer thickness. At methanol concentration of 2 M, the DMFC employing the modified membrane with a platinum layer of 66 nm-thickness showed similar performance to that of a DMFC with a bare Nafion membrane in spite of the lower proton conductivity of the former. The maximum power density of the cell using the modified membrane with a platinum layer of 66 nm-thickness increased slightly while that of the cell with the bare membrane decreased abruptly when a methanol solution of 6M was supplied.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.7
• /
• pp.56-65
• /
• 1997

In this paper, we propose a reference input odification-type iterative learning control law for a class of discrete-time nonlinear systems and prove the convergence of the output error. We can get the high-precision in case of the trajectroy control when the proposed control law is properly combined with a feedback controller, and we can easily implement the learning control law compared to the control input modification-type learning control law. To show the validity and the convergence perfodrmance of the proposed control law, we perform experimentations on the trajectroy control and rejection of periodic disturbance for a 2-axis SCARA-type direct drive robot.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.5
• /
• pp.52-57
• /
• 1999

It is very important to design of QAM modulator of high spectral efficiency for high speed data transmission. In this paper, typical 16-QAM modulator is designed by modification design of DDFS(direct digital frequency synthesizer). DDFS generates sinusoidal waveform digitally to the frequency setting word. Phase modulation is accuratly made by control of a generated phase increment value and amplitude modulation is accomplished in the D/A converter output by control of amplitude level. For the suppression of harmonics and glitch, dual-structured DDFS is studied to improve the spurious characteristics. P-Spice is used for design and simulation in mixed mode. Also we can get the satisfactory results of designed 16-QAM modulator from the constellation output.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.2B no.3
• /
• pp.81-89
• /
• 2002

The sensorless AC motor drive is a popular topic of study due to the cost and reliability of speed and position sensors. Most sensorless algorithms are based on the mathematical modeling of motors including electrical variables such as phase current and voltage. Therefore, the accuracy of such variables largely affects the performance of the sensorless AC motor drive. However, the output voltage of the SVPWM-VSI, which is widely used in sensorless AC motor drives, has considerable errors. In particular, the SVPWM-VSI is error-prone in the low speed range because the constant DC link voltage causes poor resolution in a low output voltage command and the output voltage is distorted due to dead time and voltage drop. This paper investigates a novel high-performance strategy for overcoming these problems in a sensorless ac motor drive. In this paper, a variation of the DC link voltage and a direct compensation for dead time and voltage drop are proposed. The variable DC link voltage leads to an improved resolution of the inverter output voltage, especially in the motor's low speed range. The direct compensation for dead time and voltage drop directly calculates the duration of the switching voltage vector without the modification of the reference voltage and needs no additional circuits. In addition, the proposed strategy reduces a current ripple, which deteriorates the accuracy of a monitored current and causes torque ripple and additional loss. Simulation and experimentation have been performed to verify the proposed strategy.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.10-19
• /
• 1993

Broad, mercerized broad, mercerized twill cotton fabrics and rayon fabric were treated with cellulase for 30~480 minutes at different temperature, concentration, time, and also treating methods such as continuously-treated or repeatedly-treated, and dyed with two direct dyes before or after enzyme treatment. From the experimental result by treating under the various conditions above, it was obtained that the weight loss increased more in thin fabric than thick one. In addition, it was considered that the treatment in 5$0^{\circ}C$ for 240 minutes brought about the ideal weight loss and flexible hand of the specimens. For both broad and mercerized broad, repeated treatment showed more weight loss than continuous. Direct dye on cotton fabric apparently inhibited hydrolysis. Ionic surfactants showed the inhibition effect of the catalytic hydrolysis of enzyme, on the other hand, nonionic surfactant did not.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.572-583
• /
• 2019

This paper aims to assess the applicability of the Runge Kutta Discontinuous Galerkin-Direct Ghost Fluid Method to the internal explosion inside a water-filled tube, which previously was studied by many researchers in separate works. Once the explosive charge located at the inner center of the water-filled tube explodes, the tube wall is subjected to an extremely high intensity fluid loading and deformed. The deformation causes a modification of the field of fluid flow in the region near the water-structure interface so that has substantial influence on the response of the structure. To connect the structure and the fluid, valid data exchanges along the interface are essential. Classical fluid structure interaction simulations usually employ a matched meshing scheme which discretizes the fluid and structure domains using a single mesh density. The computational cost of fluid structure interaction simulations is usually governed by the structure because the size of time step may be determined by the density of structure mesh. The finer mesh density, the better solution, but more expensive computational cost. To reduce such computational cost, a non-matched meshing scheme which allows for different mesh densities is employed. The coupled numerical approach of this paper has fewer difficulties in the implementation and computation, compared to gas dynamics based approach which requires complicated analytical manipulations. It can also be applied to wider compressible, inviscid fluid flow analyses often found in underwater explosion events.

• Structural Engineering and Mechanics
• /
• v.90 no.2
• /
• pp.117-125
• /
• 2024

This article presents the behaviour and design of cold-formed steel (CFS) web-stiffened lipped channel beams that primarily fail owing to the buckling interaction of distortional and global buckling modes. The incorporation of an intermediate stiffener in the web of the lipped channel improved the buckling performance leads to distortional buckling at intermediate length beams. The prediction of the strength of members that fail in individual buckling modes can be easily determined using the current DSM equations. However, it is difficult to estimate the strength of members undergoing buckling interactions. Special attention is required to predict the strength of the members undergoing strong buckling interactions. In the present study, the geometric dimensions of the web stiffened lipped channel beam sections were chosen such that they have almost equal distortional and global buckling stresses to have strong interactions. A validated numerical model was used to perform a parametric study and obtain design strength data for CFS web-stiffened lipped channel beams. Based on the obtained numerical data, an assessment of the current DSM equations and the equations proposed in the literature (for lipped channel CFS sections) is performed. Suitable modifications were also proposed in this work, which resulted in a higher level of design accuracy to predict the flexural strength of CFS web stiffened lipped channel beams undergoing distortional and global mode interaction. Furthermore, reliability analysis was performed to confirm the reliability of the proposed modification.

• International Journal of Advanced Culture Technology
• /
• v.12 no.2
• /
• pp.161-166
• /
• 2024

As globalization has accelerated, the use of English loanwords is increasing in South Korea. In this paper, we have analyzed news stories from four Korean quality newspapers-Chosun Ilbo, Dong-A Ilbo, KyungHyang Sinmun, and Chung-Ang Ilbo to investigate the usage of English loanwords in news texts. Thirty-eight news stories on life, politics, business and IT were collected from the four newspapers and then analyzed based on the five types of loanwords-Direct, Mixed Code Combination, Clipping and Neologism and Double Notation, partly following Lee's and Rudiger's classification. As a result, the followings were revealed: first, the use of the category Direct was overwhelming the others with 90%, indicating that English loanwords were not translated from its source language and introduced into Korean directly with little modification; second, the use of English loanwords was significantly higher in the sections of business and IT than in other sectors, implying that English loanwords function in a similar way as a lingua franca does within those fields. Furthermore, the linguistic trends can provide a basic guide for translators to make an informed decision between the use of English loanwords and its translated Korean version in English-into Korean translation.

• Journal of Korean Society on Water Environment
• /
• v.25 no.2
• /
• pp.311-321
• /
• 2009

Long-Term Hydrologic Impact Assessment (L-THIA) was modified to improve runoff and pollutant load prediction for Korean watersheds with changes in land use classification and event mean concentration produced from observed data in Korea. The L-THIA model was linked with SCE-UA, which is one of the global optimization techniques, to automatically calibrate direct runoff. Modified L-THIA model was applied to Gumho River Basins to analyze spatial distribution of nonpoint source pollution. The results of model calibration during 1991~2000 and validation during 1981~1990 for direct runoff represented high model efficiency of 0.76 for calibration and 0.86 for validation. As a results of spatial analysis of nonpoint source pollution, the BOD was mainly loaded from urban area but SS, TN, and TP from agricultural area which is mainly located along the stream. Modified L-THIA model improve its accuracy with minimum imput data and application efforts. From this study, we can find out the L-THIA model is very useful tool to predict direct runoff and pollutant loads from the watershed and spatial analysis of nonpoint source pollution.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.247-258
• /
• 2004

The composite shell element is developed for the solution of undamped forced vibration problem of composite curved panels. The finite element used in the current study is an 4-node enhanced assumed shell element with six degrees of freedom per node. The composite shell element is free of both shear and membrane locking phenomenon by using the enhanced assumed strain(EAS) method. A modification to the first-order shear deformation shell theory is proposed, which results in parabolic thorough-thickness distribution of the transverse shear strains and stresses. It eliminates the need for shear correction factors in the first order theory. Newmark's direct integration technique is used for carrying out the integration of the equation motion, to obtain the repones history. Parametric studies of curved composite panels are carried out for forced vibration analysis by geometrical shapes and by laminated composite; such as fiber orientation, stacking sequence.