• 한국환경보건학회지
• /
• 제31권4호
• /
• pp.260-265
• /
• 2005

Indoor air quality might be affected by source strength of indoor pollutants, ventilation rate, decay rate, outdoor level, and so on. Although technologies measuring these factors exist directly, direct measurements of all factors are not always practical in most field studies. The purpose of this study was to develop an alternative method to estimate the source strength and deposition constant by application of multiple measurements. For the total duration of 60 days, indoor and outdoor $NO_2$ concentrations every 3 days were measured in 30 houses in Seoul, Asan and Daegu. Using a compartment model by mass balance and linear regression analysis, penetration factor (ventilation divided by sum of air exchange rate and deposition constant) and source strength factor (emission rate divided by sum of air exchange rate and deposition constant) were calculated. Subsequently, the source strength and deposition constant were estimated. Natural ventilation was $1.80{\pm}0.42\;ACH,\;1.11{\pm}0.50\;ACH,\;0.92{\pm}0.26\;ACH$ in Seoul, Asan and Daegu, respectively. Calculated deposition constant(K) and source strength of $NO_2,$ in this study were $0.98{\pm}0.28\;hr^{1}\;and\;16.28{\pm}7.47\;ppb/h,$ respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.125-127
• /
• 1998

The widely used power supply (Switched Mode Power Supply : SMPS) as a source in order to stabilize direct current for electronics or communication systems has merits, when it is compared to the existing source for stability, such as high efficiency, small size, light weight by means of switching process of the semiconductor device which controls the flow of power. However, due to existence of inductors and capacitors used for charging energy, the source part in electronic or communication systems hasn't reached the speed, that is supposed to get, for achieving smaller size and lighter weight. In order to got smallness in size, it is necessary to increase switching frequency. And that makes devices for measuring energy smaller. Nevertheless, the rise switching frequency brings increases in switching loss, inductor loss, and power loss. Also, the occurrence of surge and noise caused by high frequency switching is setting higher. The resonant converter has been considered as one of methods that give solutions for the problems of SMPS and that method has been paid attention as a source technology in electronics and communication.

• International Journal of Computer Science & Network Security
• /
• 제22권2호
• /
• pp.261-271
• /
• 2022

The study aimed to identify the impact of the application of technical equipment for infrastructure to achieve the quality of e-learning for students in the faculties at Northern Border University, in Arar city. The study applied the analytical survey study method. To achieve the study purpose, the researcher prepared a study tool which is a questionnaire to measure the impact o of applying technical instrument for the infrastructure to achieve the quality of e-learning for students. The study sample size reached (218) students from both groups from the university faculties in Arar city. The results of the study revealed a tendency in the study sample's responses to the availability of the majority of the questionnaire criteria significantly. This indicates the positive impact of the application of technical equipment on the infrastructure to achieve the application quality of e-learning at Northern Border University, the study recommended the following: The need to pay attention to measuring the quality of electronic courses every two years in addition to the need to adjust the quality standards of e-content provided through e-learning platforms. Also, there is the gradual application of e-learning at the university in addition to spreading the culture of e-learning quality among all groups of the university community. Also, it is necessary to direct them towards benefiting from the advantages of e-learning that observes quality standards.

• Earthquakes and Structures
• /
• 제24권2호
• /
• pp.127-140
• /
• 2023

The vibration of microtubule in human cells is the source of electrical field around it and inside cell structure. The induction of electrical field is a direct result of the existence of dipoles on the surface of the microtubules. Measuring the electrical fields could be performed using nano-scale sensors and the data could be transformed to other computers using internet of things (IoT) technology. Processing these data is feasible by artificial intelligence-based methods. However, the first step in analyzing the vibrational behavior is to study the mechanics of microtubules. In this regard, the vibrational behavior of the microtubules is investigated in the present study. A shell model is utilized to represent the microtubules' structure. The displacement field is assumed to obey first order shear deformation theory and classical theory of elasticity for anisotropic homogenous materials is utilized. The governing equations obtained by Hamilton's principle are further solved using analytical method engaging Navier's solution procedure. The results of the analytical solution are used to train, validate and test of the deep neural network. The results of the present study are validated by comparing to other results in the literature. The results indicate that several geometrical and material factors affect the vibrational behavior of microtubules.

• 전자공학회논문지SC
• /
• 제38권1호
• /
• pp.45-52
• /
• 2001

PISA 방법은 주로 승모판에서 역류하는 혈류량을 측정하기 위해 사용되고 있다. 이 방법은 PISA isotach의 기하학적 모양에 대한 모델링에 관한 것이다. PISA의 일반적인 유동모델은 isotach의 표면이 수식적으로 반구이거나 비반구임을 가정하여 계산된 것이지만, 본 논문에서는 영역기반방법으로 isotach를 추정한 후, 타원체의 높이에 기초한 실제적인 표면분할 유동모델을 이용하여 유체량을 추정하였다. 제안한 밥법을 평가하기 위해, $30cm^3/sec-60\;cm^3/sec$의 실제 유량을 가지는 동적인 180개의 유동영상에 대해서 기존 방법들과 비교하였다. 실험한 결과, 반구 유동모델의 유체량 평균이 $29\;cm^3/sec$로 실제 유체량 평균보다 35%정도 적게 추정을 하였고, 제안한 방법의 평균은 $45\;cm^3/sec$으로 비반구 유동모델의 평균과 같았고, 유체량 변화파형도 유사한 결과를 가짐을 알 수 있었다.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.80-84
• /
• 2015

Softness is considered one of the most important attributes of hygiene paper such as tissue and towel. Being subjective in nature, however, softness attribute has been generally believed to be impossible to evaluate using objective methods. Hallmark in his pioneering work proposed that tissue subjective softness should be mainly consisted of the bulk softness component and surface softness component. The bulk softness component can be determined by tensile stiffness; the surface softness component by surface tester. The surface friction turns out far more important than the surface roughness in determining the surface softness component. It cannot be too much emphasized that both results of the tensile stiffness and the surface friction should depend on measuring conditions such as an instrument used, sample sizes (e.g., basis weight, length, and width) and operating conditions of the instrument (e.g., gauge length, cross-head speed, size of stylus, and its scanning speed). This indicates that a direct comparison of the test results would be impossible or misleading unless they have been tested under the identical conditions. This may explain why the standard objective test method for tissue softness has not been available at present.

• 한국측량학회지
• /
• 제20권4호
• /
• pp.375-381
• /
• 2002

하천이나 해양의 수심에 관한 정보는 주로 수면에서 해저까지의 음파신호의 왕복시간을 관측하는 음향측심에 의해 취득되며 이외에도 사진측량, 수중측량, 레이저 측량 등이 있다. 이 방법은 주로 수심이 얕은 해안이나 하천 등의 항로도 작성에 이용된다. 한편 부유물질의 영향이 적고, 수질이 양호한 해역에서는 항공사진 또는 인공위성 영상을 활용할 수도 있다. 현재 우리 나라의 경우 전반적인 수심측량이 완료되었으나, 측량된 수심의 점밀도가 비교적 낮은 실정이다. 따라서 본 연구에서는 현재 가장 많이 이용되고 있는 음향측심기를 이용해 하천의 수심을 측정하고, GPS-RTK기법으로 평면위치를 측량하여 격자 수심도를 작성하여 그 정확도를 비교 분석하였으며, 그 결과 음향측심기에 의한 수심측량이 기존의 방법에 비해 상대적으로 정확하고 경제적인 수심측량이 가능하다고 판단되었다.

• Journal of Biosystems Engineering
• /
• 제35권5호
• /
• pp.343-349
• /
• 2010

Rapid on-site sensing of nitrate-nitrogen and potassium ions in hydroponic solution would increase the efficiency of nutrient use for greenhouse crops cultivated in closed hydroponic systems while reducing the potential for environmental pollution in water and soil. Ion-selective electrodes (ISEs) are a promising approach because of their small size, rapid response, and the ability to directly measure the analyte. The capabilities of the ISEs for sensing nitrate and potassium in hydroponic solution can be affected by the presence of other ions such as calcium, magnesium, sulfate, sodium, and chloride in the solution itself. This study was conducted to investigate the applicability of two ISEs consisting of TDDA-NPOE and valinomycin-DOS PVC membranes for quantitative determinations of $NO_3$-N and K in hydroponic solution. Nine hydroponic solutions were prepared by diluting highly concentrated paprika hydroponic solution to provide a concentration range of 3 to 400 mg/L for $NO_3$-N and K. Two of the calibration curves relating membrane response and nutrient concentration provided coefficients of determination ($R^2$) > 0.98 and standard errors of calibration (SEC) of < 3.79 mV. The use of the direct potentiometry method, in conjunction with an one-point EMF compensation technique, was feasible for measuring $NO_3$-N and K in paprika hydroponic solution due to almost 1:1 relationships and high coefficients of determination ($R^2$ > 0.97) between the levels of $NO_3$-N and K obtained with the ion-selective electrodes and standard instruments. However, even though there were strong linear relationships ($R^2$ > 0.94) between the $NO_3$-N and K concentrations determined by the Gran's plot-based multiple standard addition method and by standard instruments, hydroponic $NO_3$-N concentrations measured with the ISEs, on average, were about 10% higher than those obtained with the automated analyzer whereas the K ISE predicted about 59% lower K than did the ICP spectrometer, probably due to no compensation for a difference between actual and expected concentrations of standard solutions directly prepared.

• 생명과학회지
• /
• 제18권12호
• /
• pp.1644-1650
• /
• 2008

티트리 에센셜 오일은 호주 원주민들의 전통적인 피부 소독제나 치료제로 널리 사용되어 왔으며, 항균효과와 주요성분 등 많은 보고가 있으나 추출 방법이나 사용 부위 등에 따라 효능의 차이를 보인다. 본 연구에서는 아로마테라피 등에 현재 많이 이용되고 있는 시판 티트리 오일의 성분과 효능을 평가하여, 다른 에센셜 오일과의 비교 이용을 용이하게 하고자 하였다. 티트리 오일의 주요성분은 GC-MS 분석에 의하여 ${\beta}$-terpinene (20.87%), ${\alpha}$-pinene (17.60%), p-cymene (11.23%), 3-carene (10.40%), trans-anethole (8.47%), limonene (4.65%)으로 밝혀졌으며, 5% 이하의 농도에서 3시간 미만까지는 피부세포에 독성이 없었다. 오일의 라디컬 소거능을 알아본 결과, DPPH와 ABTS의 양라디컬에 대하여 강한 소거능을 나타내어 강한 항산화능을 시사했다. 또한, 오일의 direct contact와 vapor-phase의 항균활성을 disc diffusion법으로 스크리닝 한 결과, direct contact 활성의 경우 그람음성균에 대하여 높은 활성을 나타내었으며, vapor는 S. aureus에 대하여 강한 효과를 나타내었다. 본 연구에서 실제 많이 사용되는 티트리 오일의 성분과 생물활성을 측정함으로써 허브 오일들의 정확한 선택과 활용을 위한 기본적인 결과를 얻었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1995년도 가을 학술발표회 논문집
• /
• pp.15.2-22
• /
• 1995

Evaluating stiffness of near-surface materials has been one of the critically important tasks in many civil engineering works. It is the main goal of geotechnical characterization. The so-called deflection-response method evaluates the stiffness by measuring stress-strain behavior of the materials caused by static or dynamic load. This method, however, evaluates the overall stiffness and the stiffness variation with depth cannot be obtained. Furthermore, evaluation of a large-area geotechnical site by this method can be time-consuming, expensive, and damaging to many surface points of the site. Wave-propagation method, on the other hand, measures seismic velocities at different depths and stiffness profile (stiffness change with depth) can be obtained from the measured velocity data. The stiffness profile is often expressed by shear-wave (S-wave) velocity change with depth because S-wave velocity is proportional to the shear modulus. that is a direct indicator of stiffiiess. The crosshole and downhole method measures the seismic velocity by placing sources and receivers (geophones) at different depths in a borehole. Requirement of borehole installation makes this method also time-consuming, expensive, and damaging to the sites. Spectral-Analysis-of-Surface-Waves (SASW) method places both source and receivers at the surface, and records horizontally-propagating surface waves. Based upon the theory of surfacewave dispersion, the seismic velocities at different depths are calculated by analyzing the recorded surface-wave data. This method can be nondestructive to the sites. However, because only two receivers are used, the method requires multiple measurements with different field setups and, therefore, the method often becomes time-consuming and labor-intensive. Furthermore. the inclusion of noise wavefields cannot be handled properly, and this may cause the results by this method inaccurate. When multi-channel recording method is employed during the measurement of surface-waves, there are several benefits. First, usually single measurement is enough because multiple number (twelve or more) of receivers are used. Second, noise inclusion can be detected by coherency checking on the multi-channel data and handled properly so that it does not decrease the accuracy of the result. Third, various kinds of multi-channel processing techniques can be applied to f1lter unwanted noise wavefields and also to analyze the surface-wavefields more accurately and efficiently. In this way, the accuracy of the result by the method can be significantly improved. Fourth, the entire system of source, receivers, and recording-processing device can be tied into one unit, and the unit can be pulled by a small vehicle, making the survey speed very fast. In all these senses, multi-channel recording of surface waves is best suited for a routine method for geotechnical characterization in most of civil engineering works.