• Journal of Astronomy and Space Sciences
• /
• 제16권2호
• /
• pp.191-198
• /
• 1999

Results of RF compatibility test between KOMPSAT(Korea Multi-Purpose SATellite) and TTC(Tracking, Telemetry, and Command) station are described. S/C(Spacecreft) RF Test, telemetry test, command test, ranging test, and tracking receiver test were performed with respect to pass/fail criteria. To provide physical RF interface between KOMPSAT and TTC equipment, direct low cable and antenna-to-antenna interface were implemented. Through RF compatibility test, it was fully demonstrated that KOMPSAT and TTC equipment are functionally workable.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.171-178
• /
• 2013

Workers are avoiding production/manufacturing sites due to the poor working environment and concern over safety. Small and medium-sized businesses introduce new equipment to secure safety in the production site or ensure effective process management by introducing the real-time monitoring technique for existing equipment. The importance of real-time monitoring of equipment and process in the production site can also be found in the ANSI/ISA-195 model. Note, however, that most production sites still use paper-based work slip as a process management technique. Data reliability may deteriorate because information on the present condition of the production site cannot be collected/analyzed properly due to manual data writing by the worker. This paper introduces the monitoring and process management technique based on a direct facility interface to secure safety in the field by improving the poor working environment and enhance there liability and real-time characteristics of the production data. Since the data is collected from equipment in real-time directly through the SIB-based interface and PLC-based interface, problems associated with workers' manual data input are expected to be solved; safety can also be improved by enhancing workers' attention to work by minimizing workers' injuries and disruption.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1063-1070
• /
• 2011

생산시스템은 다양한 제품을 특정 공정에 따라 생산되며, 이는 다양한 생산 데이터를 발생시킨다. 이러한 데이터를 효율적으로 관리하기 위해 제조실행시스템(MES)과 같은 생산관리시스템이 사용된다. MES에서 가장 중요한 항목은 생산설비에서 발생되는 설비데이터를 작업자의 간섭 없이 직접적으로 수집하는 시스템이다. 본 논문에서는 생산현장에서 발생하는 다양한 정보를 실시간으로 수집하기 위한 데이터 수집 방법으로 범용기계에 적용 가능한 센서를 이용한 방법과 자동화 기계에 적용 가능한 PLC를 이용한 데이터수집 방법을 제안하였다. 제안된 데이터 수집시스템은 실제 생산시스템에 적용하여 효율성을 검증하였다. 제조 현장에서 설비의 상태데이터를 수집하는 시스템을 활용하여 실시간으로 현장정보를 제공할 수 있는 MES를 구현할 수 있다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
• /
• pp.141-144
• /
• 2000

The slope stability of waste landfill has been a problem in domestic and foreign countries. Waste landfills are being constructed in a reclaimed land or mountainous area. But most of these places are consisted of steep slope and hence it is necessary to use the geosynthetic liners in there. The large size direct shear test(30cm x 30cm) equipment was used to determine the interface friction angles between CCLs and soil & geomembranes. The centrifuge model tests were performed to investigate the slope stability with considering various geosynthetic liners conditions and degree of slope. The results of centrifuge model test indicate that the degree of saturation of GCL, roughness of geomembrane, and slope of landfill have greatly influenced on the slope stability of solid waste landfill.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.377-384
• /
• 2009

In this paper, leakage current sensing module of SoC(System on Chip)type and real time monitoring system under consideration of electromagnetic interface in power trunk line are developed. The first, leakage current sensing module of SoC type under consideration of electromagnetic interface is developed, and the developed sensing module of SoC type is composed of leakage sensing part, power supply part, interface part, communication part, AD(Alternating current to Direct current)convert part and amplification part. And also the electromagnetic compatibility is evaluated by conduction and radiation of EMI(Electromagnetic Interference) for developed sensing module. The developed system can have confidence, stability and do energy saving under mixed electric circumstance of the low voltage communication device and high voltage equipment. The second, the real time remote monitoring system is developed using designed wire and wireless communication module with leakage current sensing module of SoC type. The developed real time remote monitoring system can monitor sensing state, occurrence state of leakage current and alarm for each step etc.. And the device configuration, PCB layout for leakage current sensing module of system on chip type and the experiment configuration in consideration of EMI are presented. Also the measurement results of conduction and radiation for EMI are presented.

• 한국ITS학회 논문지
• /
• 제17권1호
• /
• pp.100-113
• /
• 2018

네트워크 수요량 향상 방안 중 가장 주목받고 있는 Proximity Service는 주파수 사용의 효율성 증대를 위해 대부분 주파수 재사용 방식을 사용한다. 그 결과 셀 edge에서 셀룰러 사용자의 Proximity Service 사용자의 셀 간 간섭 문제가 발생한다. 본 논문에서는 eNB에 Proximity Function의 기능과 파라미터를 새롭게 정의하고, ProSe 파라미터와 ProSe user equipment에 대한 정보를 X2 인터페이스를 통해 인접 셀과 교환하게 함으로써 셀 간섭 완화 방안을 제안한다. 우선 ProSe 탐색 과정에서 주파수 센싱을 통해 셀 간 간섭 문제를 일으키지 않을 자원을 할당한다. 그리고 ProSe 통신 상황에서는 ProSe application code, ProSe application QoS, ProSe application ID의 validity timer를 기반으로 간섭을 일으키지 않을 적합한 자원을 재 할당함으로써 셀 간 간섭 문제를 해결한다.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1821-1833
• /
• 2021

The gas-liquid counter-current flow limitation (CCFL) is closely related to efficient and safety operation of many equipment in industrial cycle. Air-water countercurrent flow experiments were performed in a tube with diameter of 25 mm to understand the triggering mechanism of CCFL. A parallel electrode probe was utilized to measure film thickness whereby the time domain and frequency domain characteristics of liquid film was obtained. The amplitude of the interface wave is small at low liquid flow rate while it becomes large at high liquid flow rate after being disturbed by the airflow. The spectral characteristic curve shows a peak-shaped distribution. The crest exists between 0 and 10 Hz and the amplitude decreases with the frequency increase. The analysis of visual observation and characteristic of film thickness indicate that two flooding mechanisms were identified at low and high liquid flow rate, respectively. At low liquid flow rate, the interfacial waves upward propagation is responsible for the formation of CCFL onset. While flooding at high liquid flow rate takes place as a direct consequence of the liquid bridging in tube due to the turbulent flow pattern. Moreover, it is believed that there is a transition region between the low and high liquid flow rate.

• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.301-307
• /
• 2002

Direct bonded SOI wafer pairs with $Si ll SiO_2/Si_3N_4 ll Si$ the heterogeneous insulating layers of SiO$_2$-Si$_3$N$_4$are able to apply to the micropumps and MEMS applications. Direct bonding should be executed at low temperature to avoid the warpage of the wafer pairs and inter-diffusion of materials at the interface. 10 cm diameter 2000 ${\AA}-SiO_2/Si(100}$ and 560 $\AA$- ${\AA}-Si_3N_4/Si(100}$ wafers were prepared, and wet cleaned to activate the surface as hydrophilic and hydrophobic states, respectively. Cleaned wafers were pre- mated with facing the mirror planes by a specially designed aligner in class-100 clean room immediately. We employed a heat treatment equipment so called fast linear annealing(FLA) with a halogen lamp to enhance the bonding of pre mated wafers We kept the scan velocity of 0.08 mm/sec, which implied bonding process time of 125 sec/wafer pairs, by varying the heat input at the range of 320~550 W. We measured the bonding area by using the infrared camera and the bonding strength by the razor blade clack opening method, respective1y. It was confirmed that the bonding area was between 80% and to 95% as FLA heat input increased. The bonding strength became the equal of $1000^{\circ}C$ heat treated $Si ll SiO_2/Si_3N_4 ll Si$ pair by an electric furnace. Bonding strength increased to 2500 mJ/$\textrm{m}^2$as heat input increased, which is identical value of annealing at $1000^{\circ}C$-2 hr with an electric furnace. Our results implies that we obtained the enough bonding strength using the FLA, in less process time of 125 seconds and at lowed annealing temperature of $400^{\circ}C$, comparing with the conventional electric furnace annealing.

• 한국산학기술학회논문지
• /
• 제11권7호
• /
• pp.2549-2558
• /
• 2010

무선 체온 모니터기는 무선으로 체온을 모니터 하기 위해 설계된 건강관리 시스템이다. 무선 체온 모니터기는 낮은 가격과 손쉬운 사용방법으로 병원 장치와 비교할만한 정확도와 몇몇 특성들을 제공한다. 무선 체온 모니터기는 밴드 파트와 모니터 파트로 구성되어 있다. 밴드 파트와 모니터 파트 모두 2.4GHz 직접 시퀀스 확산 스펙트럼 라디오가 내장되어 있는 칩콘2430, 일명 CC2430라는 마이크로 칩으로 사용한다. 이 CC2430은 무선 체온 모니터기가 집안 100피트 반경까지 상호 작동할 수 있게 해준다. 간단한 사용자 환경은 사용자로 하여금 손쉽게 고온과 저온의 한계점을 세팅할 수 있게 되어있다. 만약 사용자의 체온이 고온과 저온의 한계점을 넘어섰을 때 알람이 울리게 되어 있다. 알람은 저전압 오디오 증폭기와 스피커에 연결되어 작동되게 되어있다. 정확한 체온을 계산하기 위해 무선 체온 모니터기는 반드시 정확한 온도 검출장치를 사용해야만 한다. GE Sensing에서 선택된 서미스터는 온도 측정의 예민함과 정확함을 모두 만족시킨다. LCD 화면은 길이 64.5mm 폭 16.4mm의 백라이트 기능을 가추고 있으며 이 기능은 사용자가 어두운 환경이나 밝은 환경에서도 적어도 3피트 거리에서 화면을 모니터 할 수 있게 해준다.