• Bulletin of the Korean Chemical Society
• /
• 제25권3호
• /
• pp.373-376
• /
• 2004

A novel Er(III) complex with oxydiacetate and 1,10-phenanthroline was synthesized and its structure and luminescence properties were characterized. The complex of $[Er(ODA){\cdot}(phen){\cdot}4H_2O]^+$ crystallizes in the monoclinic space group $P2_1$/n with a = 12.216(4) ${\AA}$, b = 16.680(2) ${\AA}$, c = 12.627(3) ${\AA}$, ${\beta}=108.30(2)^{\circ}$, V = 2442.7(11) ${\AA}^3$, Z = 4 and ${\rho}=1.841 g/cm^3$. When the complex is excited at the He-Cd 325-nm line, it produces two broad bands spanning the regions 350-650 nm and 1200-1650 nm. The emission band of the complex is characterized by a series of spectral dips in the visible emission profile. The complex exhibits sensitized near- IR emission via two kinds of energy transfers from phen to Er(III): nonradiative and radiative energy transfers.

• 한국통신학회논문지
• /
• 제29권4A호
• /
• pp.363-369
• /
• 2004

본 논문에서는 파장분할다증(WDM) 첨가(add)/절취(drop)망에서 채널의 add/drop에 따라 망 내에 있는 EDFA의 이득을 제어함에 있어 세계 최초로 외란 간측기법을 적용하는 새로운 이득-클램핑(gain-clamping) 방법을 제안한다. 이득-클램핑을 위한 제어신호는 공칭 제어신호와 채널의 add/drop에 따른 이득변동을 보정하기 위한 부가제어신호로 구성된다. 외란 관측기법에 근거하여, 부가 제어신호는 채별의 add/op에 의해 발생하는 추정 외란을 보정할 수 있도록 설계하였다. 이러한 부가 제어신호를 생성하는 회로는 간단한 전자소자를 이용하여 쉽게 구현할 수 있다. 모의실험을 통해 본 논문에서 제안하는 방법을 사용할 때 채널의 add/drop 과정에서 EDFA의 출력 파형에 나타나는 이득변화에 따른 요철이 최소로 됨을 보여줌으로써 본 방법이 기존의 여타 방법들에 비해 월등함을 입증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1056-1058
• /
• 1998

Voltage dips caused by transmission system faults are usually of a short duration. High speed relaying and breaker operation will typically limit the disturbance to 0.1 seconds. Most motor controllers obtain their control power directly from the bus by means of a control transformer. Under this condition, a voltage dip can cause the contactor to drop out. disconnecting the motor from the line. The rapid re-energizing of the controller is in effect a fast reclosure which may result in motor damage. The time delay re-energizing of controller will result in a greater loss of speed and possibly loss of stability. Other means of controller can be used to prevent the motor from being disconnected from line during the fault. This can be accomplished by DC power controller or mechanically latched controller. This paper demonstrates that DC power controller or mechanically latched type controller to prevent the motor from being disconnected from line during the fault is, the most effective in minimizing speed reduction, transient motor current, transient motor torque and transient shaft torque by EMTP calculation.

• 전자공학회논문지D
• /
• 제35D권12호
• /
• pp.1-11
• /
• 1998

고속펄스 전송을 위한 다중결합된 마이크로스트립 신호버스에서 제일 근접한 선로상에 유기되는 누화피크치를 최소화시키기 위해 선로자태를 합성시키는 방법을 제안하였다. 평행하게 배열된 데이터버스에서 구동선로로부터의 누화에너지는 가장 근접한 선로에 거의 집중되므로 반사파 제어를 위한 최적화기법을 통해 선로간의 평균간격을 늘리는 방법을 채택하였다. 입출력 파형예측을 위해 일반화된 S-행렬 기법을 적용하였으며 선로간의 평균간격을 늘리기 위해 합성된 다양한 형태의 비일정선로의 누화특성을 비교 분석하였다. 그 결과 펄스가 갖는 주파수 범위내에서 스펙트럼을 고르게 반사시키게 하는, dip을 갖는 쳬비셰프형 테이퍼가 입출력 파형의 보전성에 큰 영향을 주지 않는 범위내에서 누화피크치를 최소로 함을 볼 수 있었다.

• Journal of Magnetics
• /
• 제14권1호
• /
• pp.11-14
• /
• 2009

We investigated the I-V curves and differential tunneling conductance of two, CoFeB/MgO/CoFeB-based, magnetic tunnel junctions (MTJs): one with a low tunneling magnetoresistance (TMR; 22%) and the other with a high TMR (352%). This huge TMR difference was achieved by different MgO sputter conditions rather than by different annealing or deposition temperature. In addition to the TMR difference, the junction resistances were much higher in the low-TMR MTJ than in the high-TMR MTJ. The low-TMR MTJ showed a clear parabolic behavior in the dI/dV-V curve. This high resistance and parabolic behavior were well explained by the Simmons' simple barrier model. However, the tunneling properties of the high-TMR MTJ could not be explained by this model. The characteristic tunneling properties of the high-TMR MTJ were a relatively low junction resistance, a linear relation in the I-V curve, and conduction dips in the differential tunneling conductance. We explained these features by applying the coherent tunneling model.

• Geomechanics and Engineering
• /
• 제17권3호
• /
• pp.279-285
• /
• 2019

The process of slope stability analysis is one of the most important stages in design of some civil and mining projects. Bimslopes are made from bimrocks (block-in-matrix rocks) where rocky blocks are distributed in a bonded matrix of finer texture. These kind of slopes are often seen in weathered and near-surface depths. Previous studies have shown that VBP (Volumetric Block Proportion) is one of the most significant factors affecting bimrocks strength and consequently the stability of bimslopes. In this paper, the influence of block inclinations on bimslope stability have been investigated. For this purpose, 180 theoretical models have been made with various VBPs, all of them have a specified block size distribution. These bimslopes contain blocks with differing dips relative the slope inclination. Also for each kind of block inclination, 10 different blocks arrangements have been modeled. The Finite Element Method (FEM) was used to analysis the stability of these bimslopes models. The results showed the inclination of blocks has a strong impact on the Safety Factor and stability of bimslopes. When the difference in angle of dip of blocks relative to the slope angle is maximum, the Safety Factor of bimslopes tends to be a maximum compared with the matrix-only state. Furthermore, with increasing VBP of bimslopes stability increases. The graphs obtained from this study could be used for preliminary guidance in the projects design with bimslopes.

• 자원환경지질
• /
• 제2권4호
• /
• pp.1-21
• /
• 1969

The Sin po fluorite deposit is of a fissure vein type which strikes $N75^{\circ}E$, dips $80^{\circ}SE$, and is embedded in the pre-Cambrian crystalline schist. The vein is 1 meter in average in thickness, about 800 meters in length and nearly 400 meters in depth. Narrow veins of crustified fluorites and agatic quartz are discontinuously embedded in the quartz gangue. Two-phase fluid inclusions, which are available for the homogenization method by using the Heating Stage Microscope 350, are found in the fluorite crystals. Most of the fluid inclusions are primary in origin and mainly composed of liquid phase associated with minor gas phase. They are tetrahedral, rounded-tubular, wedge shaped, rectangulartrapezoid, and irregular in shape. The maximum diameter of inclusions is 0.5mm and the minimum, 0.03mm, ranging from 0.2mm to 0.08mm in an average. The homogenization temperatures obtained from the test are $135-147^{\circ}C$, $125-138^{\circ}C$, $121-137^{\circ}C$, $116-133^{\circ}C$ and $106-128^{\circ}C$ in greenish, bluish, violet, light grayish blue, colorless and pinkish fluorites respectively. The range of formation temperatures of fluorites is $106-147^{\circ}C$. Therefore, the fluorite deposit of Sinpo Mine is considered to be of low temperature hydrothermal origin. The isothermal lines were drawn on the longitudinal section of the vein from the data of homogenization test. According to the results, the central and lower parts of the ore shoot in the west ore body show the higher temperatures of $130-138^{\circ}C$ and the peripheral and upper parts of it show the lower temperatures of $108-128^{\circ}C$. It seems that the isothermal trend roughly coinside with the pitch of the ore shoot.

• 지질공학
• /
• 제16권1호
• /
• pp.23-30
• /
• 2006

현장 지표지질조사 수행 전에 지질구조를 사전 파악하기 위해 일반적으로 항공사진과 위성영상자료가 이용되는데, 이는 사전 및 시 공 중 현장 조사의 효율을 극대화하기 위한 방안이다. 화성암, 퇴적암 및 변성암이 인접하여 노출되는 안동지역의 항공사진에서 추출한 847개 선구조선의 방향성과 현장 지표지질조사에서 측정한 1,940개 불연속면의 방향성을 분석한 결과, 방위는 어느 정도 상관성을 보이나, 선구조선의 방향성은 암반의 종류와 불연속면의 종류에 따라 다른 양상을 나타낸다. 즉, 지표지질조사에서의 불연속면은 항공사진에서 선구조선으로 판독되지 않는 것들도 존재하기 때문에 암반의 종류와 불연속면의 종류별 선구조선의 방향 분석이 요구된다. 따라서 불연속면의 영향을 크게 받는 터널, 사면 등 지반구조물의 합리적인 건설을 위하여서는 항공사진 분석과 동시에 현장 지표지질조사에서 암반의 종류 및 불연속면의 종류에 따른 불연속면의 방향성 측정이 필요하다.

• 지질공학
• /
• 제13권2호
• /
• pp.193-205
• /
• 2003

양산단층과 동래단층 사이를 통과하여 건설하는 지방도를 포함하는 조사지역에는 중생대 백악기에 분출 및 관입한 안산암질암, 세립질 화강암, 반상 화강암 및 흑운모 화강암이 분포한다. 또한 이 지역은 양산단층과 동래단층 사이에서 북동방향의 명곡단층과 북북동방향의 법기단층이 발달하고 있다. 이 지역의 절리의 특성은 화강암이 분포하는 지역에서 절리의 경사각이 30도 미만의 sheeting joint가 발달하며 이외 경사각이 70도 이상 고각의 절리는 북동방향, 북서 방향 및 거의 동서방향의 3조의 절리군이 발달한다. 이들 절리의 간격은 대개 20cm이상의 보통의 간격상태로 암반이 심하게 파괴되지 않았음을 볼 수 있고, 또한 벽면강도도 일반적으로 100MPa이상으로 원암의 강도와 차이를 보이지 않아 절리가 심하게 변형작용을 받았다고는 볼 수 없다 따라서 이 지역은 양상단층과 동래단층인 두 대단층의 사이에 위치하는 암반이지만 이들 단층의 손상대(Damage zone)의 범위가 좁아 지반 상태가 비교적 양호한 것으로 판명되었다.

• 자원환경지질
• /
• 제3권3호
• /
• pp.169-176
• /
• 1970

Kubong Gold Mine is located in Kuryongri, Sayang-myun, Chungyang-gun, Choongchung-Namdo.(latitude $36^{\circ}24^{\prime}N$. longitude $126^{\circ}45^{\prime}30^{{\prime}{\prime}}E$) The mine was begun to work soon after the inhabitants of this village had accidently discovered the outcrops in April 1908. It is one of the largest gold mines in Korea which produces 4,500 tons of crude ore a month. The geology in the area consists of granitic gneiss, banded gneiss, augen-gneiss, mica schist, limesilicate of Pre-Cambrian series and sedimentary rocks(sandstones & conglomerates) of Daedong series. Basic dikes intrude the former formations. The country rock of the ore deposit is a group of the metamorphic rocks mentioned above. Gold-silver bearing quartz vein contains small amounts of pyrite, chalcopyrite, arsenopyrite, galena and sphalerite in which gold and silver occur as native state. The vein strikes $N30^{\circ}{\sim}60^{\circ}E$ and dips $20^{\circ}{\sim}50^{\circ}S$ and the average width of the vein is estimated 1 to 1.5m. Average grade of ore is Au:6~8gr/t and Ag:5~6gr/t. The ore shoot continues from the outcrop to the depth of -1760ML with dip of $20{\sim}25^{\circ}$ and strike extension reaches to 400m at the depth of -1440 ML and to more or less 200m at below. Highgrade of ore vein was found at the lowest level of the ore shoot at the time of recent field survey at the end of August 1970. Its average grade was estimated as Au:20gr/t and its width 1~2.5M in average. A series of futher prospecting for other new ore shoot or parallel veins are urgent and crosscut prospecting along the horizontal level is strongly recommended.