• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.598-610
• /
• 2022

Avoiding a fault zone would be a best practice for safety in underground construction, which is only sometimes possible because of many restrictions and other field conditions. For instance, there is an ongoing conception of Korea-Japan subsea tunnels that inevitably cross a massive fault system in the Korea Strait. Therefore it was deemed necessary to find an efficient way of predicting the likely behaviour of underground structures under fault slip. This paper presents the findings from simple numerical analysis for investigating the stress induced at a normal fault with a dip of 45 degrees. We used a boundary element software that assumed constant displacement discontinuity, which allowed the displacement to be estimated separately at both the fault's hangingwall and footwall sides. The results suggested that a principal stress rotation of 45 degrees occurred at the edges of the fault during the slip, which was in agreement with the phenomenon for fault plane suggested in the body of literature. A simple numerical procedure presented in this paper could be adopted to investigate other fault-related issues associated with underground structure construction.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.1
• /
• pp.128-137
• /
• 2022

For this study, the sol gel method was used to synthesize the spinel LiNi_0.5Mn_1.5O₄ (LNMO) electrode material. Structural, morphological, electrochemical, and kinetic aspects of the LNMO have been characterized. The synthesized LNMO was indexed with the Fd3m cubic space group. The excellent capacity retention indicates that the spinel framework of LNMO has the ability to withstand high rate charge-discharge throughout long cycle tests. The Li diffusion coefficient (D_Li) changes non-monotonically across three orders of magnitude, from 10^-9 to 10^-12 cm² s^-1 determined from GITT method. The variation of D_Li seemed to be related to three oxidation reactions that happened throughout the charging process. A small dip in D_Li at the beginning stage of Li deintercalation is correlated with the oxidation of Mn³⁺ to Mn⁴⁺. While two pronounced D_Li minima at 4.7 V and 4.75 V are due to the oxidation of Ni²⁺/Ni³⁺ and Ni³⁺/Ni⁴⁺ respectively. The depletion of D_Li at the high voltage region is attributed to the occurrence of two successive phase transformation phenomena.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.215-222
• /
• 2022

This study summarizes the basic concepts of NFT art and analyzes trends in the domestic and international NFT market to provide a better understanding of the art form to suggest various ways to utilize the art in near future when social interests in technologies such as metaverse, block chain, and NFTs are continuously increasing. In addition, by examining the rapid development and process of blockchain technology in overseas markets, and confirming cases of information transfer to various metaverses such as cryptocurrency and NFT technology, the aim is to present a foothold for the future direction of national arts in general. To this end, in order to analyze consumers' perceptions and preferences, and to draw conclusions about current NFT arts at home and abroad, a survey was conducted on NFT awareness among participants of an art fair in Gwangjin-gu, Seoul. It is hoped that this study will become a cornerstone of research on NFT works and NFT art industry, which is becoming a global issue.

• Journal of Sensor Science and Technology
• /
• v.31 no.5
• /
• pp.337-342
• /
• 2022

Hydrogen (H₂) gas is widely preferred for use as a renewable energy source owing to its characteristics such as environmental friendliness and a high energy density. However, H₂ can easily reverse or explode due to minor external factors. Therefore, H₂ gas monitoring is crucial, especially when the H₂ concentration is close to the lower explosive limit. In this study, metal oxide materials and their p-n heterojunctions were synthesized by a hydrothermal-assisted dip-coating method. The synthesized thin films were used as sensing materials for H₂ gas. When the H₂ concentration was varied, all metal oxide materials exhibited different gas sensitivities. The performance of the metal oxide gas sensor was analyzed to identify parameters that could improve the performance, such as the choice of the metal oxide material, effect of the p-n heterojunctions, and operating temperature conditions of the gas sensor. The experimental results demonstrated that a CuO/ZnO gas sensor with a p-n heterojunction exhibited a high sensitivity and fast response time (134.9% and 8 s, respectively) to 5% H₂ gas at an operating temperature of 300℃.

• Ocean and Polar Research
• /
• v.45 no.3
• /
• pp.103-111
• /
• 2023

To evaluate the impact of effluents from land-based fish farms on the coastal ocean of Wando, Korea, we analyzed inorganic nutrients, particulate organic carbon (POC), dissolved organic carbon (DOC), and colored dissolved organic matter (CDOM) in the effluent and influent of land-based fish farms during the summer (July) of 2021. The average concentrations of nutrients (Dissolved inorganic nitrogen, phosphorus, and silicate; DIN, DIP, and DSi, respectively) in the effluents of this study area were 17±3.7 μM, 1.4±0.7 μM, and 14±1.6 μM, respectively. The average concentrations of POC and DOC were 37±22 μM and 81±13 μM, respectively, with POC accounting for about 30% for total organic carbon in effluents. The Reduced Dissolved Inorganic Nitrogen/Total Dissolved Inorganic Nitrogen ratio (0.7), potential short-period index, indicates that the discharge of nutrients excreted by the fish and unconsumed feed into coastal water results in such nutrients being deposited and accumulated in the sediment. Subsequently, this continuous accumulation triggers the release of ammonium ions during organic matter decomposition, and the ammonium-enriched waters that encroach on fish farms as influent seem to be due to the diffusion of high concentrations of ammonium from bottom sediment. Furthermore, we used fluorescence indices to examine the characteristics of organic matter sources, obtaining mean values of 1.54±0.19, 1.06±0.06, and 1.56±0.06 for the humification index, biological index, and fluorescence index, respectively, in the effluent. These results indicate that the organic matters had an autochthonous origin that resulted from microbial decomposition, and such organic matters were rapidly generated and removed by biological activity, likely supplied from the sediment. Our results suggest that the effluent from land-based fish farms could be a potential source of deoxygenation occurrence in coastal areas.

• Clean Technology
• /
• v.16 no.4
• /
• pp.292-296
• /
• 2010

We fabricated quantum dot sensitized solar cells(QDSSC) using PbS as a sensitizer and measured the solar energy conversion efficiency. After growing ZnO nanowires on the substrate by low temperature ammonia solution reaction, PbS QDs were deposited on ZnO nanowires by SILAR(Successive ionic layer adsorption and reaction) method. The morphology and crystallinity of PbS/ZnO nanowires were studied by SEM and XRD. In this study, the maximum conversion efficiency of QDSSC using PbS was 0.075% at one sun, which was lower than that of QDSSC using other sensitizers. The reasons it showed relatively low efficiency are i) the probability of type-I band gap arrangement between ZnO and PbS, ii) disturbance of electron migration by the various-sized PbS band gap, iii) stability dip by the chemical reaction of PbS QDs with electrolyte. To solve these problems, researches about controlling the size distribution of PbS and new type electrolyte would be needed.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.9
• /
• pp.29-37
• /
• 2007

The experiments have been conducted on Kaolinite in laboratory to investigate the development of shrinkage cracking and propose a simple model. Image analysis method consisting of control point selection(CPS) technique is used to process and analyze images of soil cracking captured by a digital camera. The distributions of crack length increment and crack area increment vary as a three-step process. These steps are regarded as stages of soil cracking. They are in turn primary crack, secondary crack and shrinkage crack stages. In case of crack area, the primary and secondary stages end at normalized gravimetric water content(NGWC) of 0.92 and 0.70 for different specimen thicknesses respectively. In addition, the primary stage in case of crack length also ends at NGWC of 0.92 while the secondary stage stops at NGWC of 0.79, 0.82, and 0.85 for the sample thicknesses of 0.5, 1.0, and 2.0 cm respectively Based on the experimental results, the distributions of crack length increment and crack area increment appear to be linear with a decrease of NGWC. Therefore, the development of shrinkage cracking is proposed typically by a simple model functioned by a combination of three linear expressions.

• Corrosion Science and Technology
• /
• v.22 no.2
• /
• pp.123-130
• /
• 2023

This study aimed to evaluate corrosion resistance of steel coated with GI and Zn-Al-Mg alloy using cyclic corrosion test (CCT) with electrochemical polarization and impedance measurements. Results showed that the Zn-Al-Mg alloy coated steel had a much higher corrosion rate than GI coated steel in early stages of corrosion. With prolonged immersion, however, the corrosion rate of the Zn-Al-Mg alloy coated steel greatly decreased, mainly owing to a significant decrease in the cathodic reduction reaction and an increase in polarization resistance at the surface. This was closely associated with the formation of protective corrosion products including Zn₅(OH)₈Cl₂·H₂O and Zn₆Al₂(OH)₁₆CO₃. Moreover, when the steel substrate was locally exposed due to mechanical damage, the kinetics of anodic dissolution from the coating layer and the formation of protective corrosion products on the surface of the Zn-Al-Mg alloy coated steel became much faster compared to the case of GI coated steel. This could provide a longer-lasting corrosion inhibition function for Zn-Al-Mg alloy coated steel used in plant farms.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.4
• /
• pp.434-440
• /
• 2007

Yackwa is used as one of foods prepared for traditional rituals and holidays and enjoyed as snacks. Since Yackwas are fried, they contain oil, which can cause rancidity and undermines the freshness of Yackwas during distribution to retailers, not to mention a high level of calories. The study aims to develop baked Yackwas and analyze the quality in terms of calorie levels and characteristics by baking Yackwas in oven. Calorie level was 4.65 kcal/g in fried Yackwa, 3.96 kcal/g in baked Yackwa, and 2.95 kcal/g in baked peanut Yackwa prior to dip coating of grain syrup. baked Yackwa showed hardness of 13476.33 $g/cm^2$ before dipping in grain syrup, which was harder than 1912.56 $g/cm^2$ of fried Yackwa. After grain syrup coating, hardness of baked Yackwa reduced more significantly, compared with that of fried Yackwa, as grain syrup permeated through texture of Yackwa. And less hardness makes baked Yackwa tastier. Sensory evaluation was measured in a 5-point scale. Scores for texture and taste of baked Yackwa outpaced those of fried Yackwa. Score for the overall quality was 3.65 in baked Yackwa and 3.25 in baked peanut Yackwa, compared to 2.85 of fried Yackwa, indicating a higher potential of commercializing(p<0.05).

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.619-628
• /
• 2023

This study undertook a empirical analysis, delving into the association between the direct construction approach and the construction quality of general construction companies. The research hinged on corporate financial data to elucidate the premise that a reduced emphasis on direct construction approach by general construction companies correlates with a notable prevalence of building defects. Specifically, the analysis engaged with the top 100 construction companies based on their construction capability evaluation in 2022. This appraisal leveraged the Empirical Research Model(ERM) rooted in financial data-sets spanning 2017 to 2021. Findings underscored that as the ratio of direct construction approach diminishes, the incidence of building defects amplifies, signifying a consequential dip in construction quality. Moreover, the research reaffirmed that companies with elevated construction capability evaluations or larger organizational scales tend to register decreased defect rates. This study fortifies, from a theoretical perspective, the legislative imperatives championing direct construction approach, by empirically spotlighting the potential perils of over-reliance on subcontracting.