• Fibers and Polymers
• /
• v.7 no.3
• /
• pp.223-228
• /
• 2006

Hydrogels of semi-interpenetrating polymer networks (semi-IPNs) were prepared by two step reactions. Dimethylaminoethyl methacrylate (DMAM) and poly(ethylene glycol)-dimethacrylate (PEGDM) were copolymerized to yield hydrogels, and then acrylic acid (AA) monomer were adsorbed in the hydrogels followed by polymerization of AA to produce semi-IPNs. The swelling behavior of semi-IPNs depends largely on pH of medium, showing that the degree of swelling of the semi-IPNs exhibits a minimum at pH 6.0. It is observed that the elastic modulus of semi-IPNs is closely related to its swelling behavior.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.4
• /
• pp.274-278
• /
• 2001

Polymer membranes composed of N, N-dimethylaminoethyl methaccrylate(DMAEMA) and acrylamide(AAm)(or ethyl acrylamide(EAAm) were prepared to demonstrated the thermo-control of solute permeation. Poly DMEMA has a lower critical solution temperature(LCST) at around 50$\^{C}$ in water, With the copolymerization of DMAEMA with AAm (or EAAm) a shift in the LCST to a lowere temperature was observed, probably due to the formation of hydrogen bonds between the amide and N-N-dimethylamino groups. However, the temperature-induced phase transition of poly(DMAEMA-co-EAAm) did not show a similar trend to that of poly(DMAEMA- co-AAm) in the gel state. The hydrogen bonds in poly(DMAEMA-co-EAAm) were significantly disrupted with the formation a gel network, which led to a difference in the swilling behavior of polymer gels in response to temperature. To apply these polymers to temperature-sensitive sol-ute permeation, polymer membranes were prepared. The permeation pattern of hydrocortisone, used as the model solute, was explained based on the temperature-sensitive swelling behavior of the polymer membranes.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.579-585
• /
• 2017

Acrylic resins containing tertiary amine were synthesized by a radical polymerization of monomers including n-butyl acrylate (BA), methyl methacrylate (MMA), n-butyl methacrylate (BMA) and dimethylaminoethyl methacrylate (DMAEMA), and diethylaminoethyl methacrylate (DEAEMA) containing tertiary amine. Synthesized acrylic resins were applied to develope coatings of acrylic resins containing tertiary amine. And ${\gamma}$-glycidoxypropyl trimethoxysilane (GPTMS) or ${\gamma}$-glycidoxypropyl triethoxysilane (GPTES) was used as hardener. Developed coatings were white colored ones to use titanium dioxide and were hardened with hardener for measuring their physical properties. Measured physical properties were basic properties, adhesivity and weatherability. As a result, developed acrylic resins coatings containing tertiary amine showed excellent adhesivity on various substrates and also showed the same result on weatherability on dry weather condition.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.202-214
• /
• 2015

Stimuli-responsive biomaterials that alter their function through sensing local molecular cues may enable technological advances in the fields of drug delivery, gene delivery, actuators, biosensors, and tissue engineering. In this research, pH-responsive hydrogel which is comprised of dimethylaminoethyl methacylate (DMAEMA) and 2-hydroxyethyl methacrylate (HEMA) was synthesized for the effective delivery of doxorubicin (Dox) to breast cancer cells. Cancer and tumor tissues show a lower extracellular pH than normal tissues. DMAEMA/HEMA hydrogels showed significant sensitivity by small pH changes and each formulation of hydrogels was examined by scanning electron microscopy, mechanical test, equilibrium mass swelling, controlled Dox release, and cytotoxicity. High swelling ratios and Dox release were obtained at low pH buffer condition, low cross-linker concentration, and high content of DMAEMA. Dox release was accelerated to 67.3% at pH 5.5 for 6-h incubation at $37^{\circ}C$, while it was limited to 13.8% at pH7.4 at the same time and temperature. Cell toxicity results to breast cancer cells indicate that pH-responsive DMAEMA/HEMA hydrogels may be used as an efficient matrix for anti-cancer drug delivery with various transporting manners. Also, pH-responsive DMAEMA/HEMA hydrogels may be useful in therapeutic treatment which is required a triggered release at low pH range such as gene delivery, ischemia, and diabetic ketoacidosis.

• Journal of Photoscience
• /
• v.7 no.2
• /
• pp.47-52
• /
• 2000

The copolymmers of N, N-dimethylaminoethyl methacrylate(DAEM) and N-arylmethacrylamide (AMA) were prepared, and their photochemical properties as a negative photoresist were studied by the measurements of insoluble fraction, and by UV and IR absorption spectral changes. These copolymers are soluble in DMF, actone, methanol, of acidic buffer solutions. Solubility of these copolymer films in the vuffer solutions increased with the amount of DAEM units in the copolymer and decreased with the pH value. The insoluble fraction of the copolymer films in the buffer solution of pH 4 of in methanol increased with irradiation time and the amount of AMA units in the copolymer. UV and IR spectral changes indicated that not only photo-crosslinking but also the photo-Fries rearrangement took place upon irradiation with a 254nm UV light.

• Macromolecular Research
• /
• v.8 no.2
• /
• pp.89-94
• /
• 2000

A semi-interpenetrating network (IPN) was prepared for a temperature-sensitive polymer system composed of sodium alginate and poly (N, N-dimethylaminoethyl methacrylate (DMAEMA)-co-ethyl acrylamide (EAAm)). The role of sodium alginate is to provide crosslinked network and that of poly(DMAEMA-co-EAAm) is to provide temperature responsiveness to the polymer system. Semi-IPN gel shows temperature-induced swelling transition at the same temperature of the lower critical solution temperature of poly(DMAEMA-co-EAAm) and its swelling kinetics is manipulated by the control of crosslinking densitv.

• Elastomers and Composites
• /
• v.29 no.5
• /
• pp.444-452
• /
• 1994

Emulsion graft copolymerizations of vinyl monomers, butyl acrylate(BA), methyl methacrylate(MMA), 2-ethylhexyl acrylate (EHA), glycidyl methacrylate (GMA), 2-hydroxyethyl methacrylate(HEMA), methacrylonitrile(MAN), dimethylaminoethyl methacrylate(DAMA) or 2-vinyl pyridine(VP), onto carboxyl-terminated SBR latex were carried out under different experimental conditions. In case of synthesizing SBR-g-poly(butyl acrylate), the degree of grafting was increased with increasing the amount of emulsifier, polymerization temperature and the amount of initiator. Pull-out strength of resorcinol-formaldehyde-latex(RFL) adhesives formulated with modified latexes was very higher than that of RFL adhesive formulated with ungrafted latex. When the modified latexes with GMA, HEMA, MAN, DAMA or VP were used, the break occurred at cords. Peel strength of RFL adhesives formulated with SBR-g-poly(GMA), SBR-g-poly(HEMA) or SBR-g-poly(VP) was higher by about 1.3 times than that of RFL adhesives formulated with unmodified SBR against nylon cord and was higher by about 2.0 times against polyester cord.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.679-690
• /
• 1996

Acrylic copolymer was synthesized from 2-dimethylaminoethyl methacrylate and alkylmethacrylate containing long chain hydrocarbon group. To facilitate emulsification in water, acrylic copolymer was treated with acetic acid, and therefore acetated acrylic copolymer was produced. Acetated acrylic copolymer was perfectly emulsified in water and showed increased emulsion stability. Polymer as a cement dispersion agent(PDCM-PSD) was prepared by blending the newly synthesized acetates acrylic copolymer with sodium gluconate, oleic acid, and triethanolamine. The applicability of the blended polymer was examined, and it was found that the effects of dispersion and water-proof(0.3~0.5) were excellent.

• Journal of the Korean Wood Science and Technology
• /
• v.25 no.3
• /
• pp.75-82
• /
• 1997

To improve the quality of coated paper, the continuous research to the coating components and development of alternative latices is required. Recently, amphoteric latex is getting a great concern due to their changable properties of surface charge through controlling pH and some methods have been tried to prepare amphoteric latices. This study was carried out to synthesize amphoteric latex using seeding polymerization method with low concentration emulsifier. Styrene was used as a main monomer in addition to acrylonitrile for a hydrophilic comonomer. acrylic acid for a anionic comonomer and N,N-dimethylaminoethyl methacrylate for a cationic comonomer. Particle size and viscosity of latex were greatly affected by addition of acrylic acid and ammonium persulfate as an initiator. Negative charge of latex in alkali condition was changed to zero to positive charge in around pH 4.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.1 no.1
• /
• pp.1-12
• /
• 2014

Polymer multilayered hydrogels were prepared on a titanium alloy (Ti) substrate using a layer-by-layer (LBL) process to load a cell growth factor. Two water-soluble polymers were used to fabricate the multilayered hydrogels, a phospholipid polymer with both N, N-dimethylaminoethyl methacrylate (DMAEMA) units and 4-vinylphenylboronic acid (VPBA) units [poly(MPC-co-DMAEMA-co-VPBA) (PMDV)], and the polysaccharide alginate (ALG). PMDV interacted with ALG through a selective reaction between the VPBA units in PMDV and the hydroxyl groups in ALG and through electrostatic interactions between the DMAEMA units in PMDA and the anionic carboxyl groups in ALG. First, the Ti substrate was covered with photoreactive poly vinyl alcohol, and then the Ti alloy was alternately immersed in the respective polymer solutions to form the PMDV/ALG multilayered hydrogels. In this multilayered hydrogel, vascular endothelial growth factor (VEGF) was introduced in different layers during the LbL process under mild conditions. Release of VEGF from the multilayered hydrogels was dependent on the location; however, release continued for 2 weeks. Endothelial cells adhered to the hydrogel and proliferated, and these corresponded to the VEGF release profile from the hydrogel. We concluded that multilayered hydrogels composed of PMDV and ALG could be loaded with cell growth factors that have high activity and can control cell functions. Therefore, this system provides a cell function controllable substrate based on the controlled release of biologically active proteins.