• 한국전자파학회논문지
• /
• 제24권7호
• /
• pp.722-729
• /
• 2013

본 논문에서는 밀리미터파 대역에서 저손실 전송 선로로 많이 사용되고 있는 구형 도파관의 단면 치수 변화가 전송 특성에 미치는 영향을 검토하였다. 도파관 내부의 그린 함수를 고유 모드 함수 전개법으로 구하고, 도파관 내부에 포스트를 설치한 구조의 내부 임피던스로부터 반사 계수 표현식을 도출하였으며, 도파관의 단면 치수 변화가 반사 계수에 미치는 영향을 검토하였다. 이론 해석의 타당성을 검증하기 위해 반사 계수를 측정하고, 이론치와 비교하였다.

• 융합정보논문지
• /
• 제11권11호
• /
• pp.159-165
• /
• 2021

본 삼차원 선택적 산화를 이용하여 20 nm 수준의 핀 폭과 점진적으로 증가된 소스/드레인 확장 영역을 갖는 핀 채널을 벌크 실리콘 기판에 제작하였다. 제안된 기법을 이용하여 삼차원 소자를 제작하기 위한 공정기법 및 단계를 상세히 설명하였다. 삼차원 소자 시뮬레이션을 통해, 제안된 소자의 주요 특징과 특성을 기존 FinFET 및 벌크 FinFET 소자와 비교하였다. 제안된 삼차원 선택적 산화 방식의 핀 채널 MOSFET는 기존의 소자들과 비교하여 더 큰 구동 전류, 더 높은 선형 트랜스컨덕턴스, 더 낮은 직렬 저항을 가지며, 거의 유사한 수준의 소형화 특성을 보이는 것을 확인하였다.

• International Journal of Oral Biology
• /
• 제45권4호
• /
• pp.197-203
• /
• 2020

Mesenchymal stem cells in the dental pulp exhibit a tendency for differentiation into various dental lineages and hold great potential as a major conduit for regenerative treatment in dentistry. Although they can be readily isolated from teeth, the exact characteristics of these stem cells have not been fully understood so far. When compared to two-dimensional (2D) cultures, three-dimensional (3D) cultures have the advantage of enriching the stem cell population. Hence, 3D-organoid culture and 3D-sphere culture were applied to dental pulp cells in the current study. Although the establishment of the organoid culture proved unsuccessful, the 3D-sphere culture readily initiated the stable generation of cell aggregates, which continued to grow and could be passaged to the second round. Interestingly, a significant increase in SOX2 expression was detected in the 3D-spheroid culture compared to the 2D culture. These results indicate the enrichment of the stemness-high population in the 3D-sphere culture. Thus, 3D-sphere culture may act as a link between the conventional and 3D-organoid cultures and aid in understanding the characteristics of dental pulp stem cells.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권10호
• /
• pp.681-686
• /
• 1999

In this study, a windmill type ultrasonic motor operated by single-phase AC electric field was fabricated, and then revolution characteristics and 3-dimensional vibration mode of the ultrasonic motor were investigated. Brass metal was pressed with umbrella-type using metal mold, then slot of 4 kind was processed at various thickness. It was found that the revolution speed of the ultrasonic motor increased with decreasing the thickness of elastic body. The revolution speed of the ultrasonic motor increased with increasing the slots of elastic body. When the characteristics was measured, applied voltage was changed from $10V_{max}\; to\; 100V_{max}$. Then, revolution was began from $30V_{max}$, if voltage was applied over $90V_{max}$ revolution speed was saturated, and not increased. The maximum revolution speed was 510[rpm] when using elastic body with 6 slots and thickness of 0.15mm. And 3-dimensional displacement mode was rotated clockwise direction.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.103-109
• /
• 2008

Semi-spherical CVT(SS-CVT) is one of friction drives, which transmits power via the friction force between a spherical shaped variator and output disks. The variator varies the speed ratio of SS-CVT continuously as well as transmits input power into the output shaft. Therefore two friction forces are normally applied on the variator; one is the longitudinal friction force for power transmission and the other is the lateral for shifting. In order to investigate the dynamic behavior of SS-CVT, we introduced a numerical model of 2-dimensional friction force using a function of slip ratio and slip angle. And a dynamic model, which describes the shifting mechanism of SS-CVT, is developed through 3-dimensional vector analysis. Finally we presented numerical results of the shift characteristics focused on the transient behavior of the variator's slip ratio and slip angle. The numerical results also show the typical CVT shifting characteristics of SS-CVT and stable shifting behaviors of the variator.

• 복식
• /
• 제57권1호
• /
• pp.130-146
• /
• 2007

Thought of postmodernism accepted between variety and differentiation is characterized by variability and indeterminacy aimed at continuous change. For that reason, modern fashion has been grouping a lot of manners for creation of the various different form and structure. This paper studies the characteristics of the folding system, which expands efficiency of the spatial utility and shows various forms. Folding system expressed in modern fashion could be divided the pleats, which were made of the folding, and the dreaperies, which were made of bending. This selects the pleats as a enlarged concept of the folding system that contains between the former and the letter. Pleats did not mean two dimensional folding surfaces, but three dimensional spatial structures. For understanding of the folding system as a three dimensional spatial structure, this is utilized with the thought of the 'le pli' of G.W.Leifniz and G.Deleuze. The pleats expressed in modern fashion can subdivided into 4 sets; crinkle system, origami system, fractal pleats by folding system, and drapery system. And Formative characteristics of the pleats are analyzed with enlargement, fluidity, deconstruction, irregularity.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.414-419
• /
• 2011

Missile am fighter aircraft have been challenged by low restoring nose-down pitching moment at high angle of attach. The consequence of weak nose-down pitching moment can be resulting in a deep stall condition. Especially, the pressure oscillation has a huge effect on noise generation, structure damage, aerodynamic performance and safety, because the flow has strong unsteadiness at high angle of attack. In this paper, the unsteady aerodynamics coefficients were analyzed at high angle of attack up to 60 degrees around two dimensional NACA0012 airfoil. The two dimensional unsteady compressible Navier-Stokes equation with a LES turbulent model was calculated by OHOC (Optimized High-Order Compact) scheme. The flow conditions are Mach number of 0.3 and Reynolds number of $10^5$. The lift, drag, pressure distribution, etc. are analyzed according to the angle of attack. The results at a low angle of attack are compared with other results before a stall condition. From a certain high angle of attack, the strong vortex formed by the leading edge are flowing downstream as like Karman vortex around a circular cylinder. Unsteady velocity field, periodic vortex shedding, the unsteady pressure distribution on the airfoil surface, and the acoustic fields are analyzed. The effects of these unsteady characteristics in the aerodynamic coefficients are analyzed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권1호
• /
• pp.9-18
• /
• 1999

The present study is aimed to investigate flow characteristics of two-dimensional backward-fac-ing step by numerical approach. A convection conservation difference scheme based upon SOLA algorithm is used for the solution of the two-dimensional incompressible Navier-Stokes equations to simulate the laminar transitional and trubulent flow conditions at which the experimental data can be available for the backlward-facing step. The twenty kinds of reynolds number are used for the calculations. In an effort to demonstrate that the reported solutions are dependent on the mesh refinement computations are performed on seven different meshes of uniformly increasing refinement. also to investigate the result of inflow dependence two kinds of the inflow profile are chosen for the laminar flow. Irregular grid is adopted to minimize the errors on the satis-faction fo the discretized continuity. As criterion of benchmarking the result of numerical simula-tion reattachment lengthis used for the selected Reynolds numbers. The results of the present study prove the fact that the numerical predictions agree well with the experimental data and the flow characteristics are shown at the backward-facing step.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.908-911
• /
• 2004

The purpose of this study is to investigate the applicability of the two dimensional model in natural rivers. In this study, two dimensional unite element model, SMS, is used to simulate a complex flow along with the sediment movements in the natural river. The RMA-2 model embeded in SMS is used to simulate flow phenomena and SED-2D model is employed to simulate sediment transport. The model is applied to the confluence zone of the Gam River and mouth of Nakdong River. For model calibration, the result of the unsteady flow analysis is compared with the Typhoon 'Rusa' data. In addition, the runoff analysis was conducted for the determination of the project flood and the flood forecasting. The simulation results presented the characteristics of two dimensional flow with velocity vector and flow depth. The sediment transport characteristics are shown in terms of sediment concentration as well as bed elevation change. Accordingly, the SMS model in this study turned out to be very effective tool for the simulation of the hydrodynamic characteristics under the various flow conditions and corresponding sediment transports in natural rivers.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.108-120
• /
• 1998

A theoretical study of three-dimensional unsteady compressible non-reacting flow inside double flow of monolith catalytic converter system attached to 6-cylinder engine was performed for the achievement of performance improvement, reduction of light-off time, and longer service life by improving the flow distribution of pulsating exhaust gases. The differences between unsteady and steady-state flow were evaluated through the numerical computations. To obtains the boundary conditions to a numerical analysis, one dimensional non-steady gas dynamic calculation was also performed by using the method of characteristics in intake and exhaust system. Studies indicate that unsteady representation is necessary because pulsation of gas velocity may affect gas flow uniformity within the monolith. The simulation results also show that the level of flow maldistribution in the monolith heavily depends on curvature and angles of separation streamline of mixing pipe that homogenizes the exhaust gas from individual cylinders. It is also found that on dual flow converter systems, there is severe interactions of each pulsating exhaust gas flow and the length of mixing pipe and junction geometry influence greatly on the degree of flow distribution.