• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.123-131
• /
• 2009

본 연구에서는 2차원 및 3차원 유한요소 해석을 이용하여 심층혼합처리 공법에 의한 연약지반 개량시 개량 심도를 결정 하였고, 그 결과는 다음과 같았다. 1. 2차원 해석 결과는 3차원 해석 결과 보다 약 10% 정도 크게 해석되었다. 2. 연약지반의 치환율이 5%이하 일 때 침하량은 급격히 증가하였다. 3. 심층혼합공법으로 연약지반 개량시 횡방향 간격 3m, 종방향 간격 6m, 그리고 8m의 심도로 개량하는것이 가장 경제적인 것으로 나타났다. 4. 심층혼합공법으로 연약지반 개량시 2차원 유한요소 해석보다 3차원 유한요소 해석으로 결정되어야 한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권8호
• /
• pp.1066-1073
• /
• 2017

Objective: Growth-related traits are important economic traits in the swine industry. However, the genetic mechanism of growth-related traits is little known. The aim of this study was to screen the candidate genes and molecular markers associated with body dimension and body weight traits in pigs. Methods: A genome-wide association study (GWAS) on body dimension and body weight traits was performed in a White $Duroc{\times}Erhualian$ $F_2$ intercross by the illumina PorcineSNP60K Beadchip. A mixed linear model was used to assess the association between single nucleotide polymorphisms (SNPs) and the phenotypes. Results: In total, 611 and 79 SNPs were identified significantly associated with body dimension traits and body weight respectively. All SNPs but 62 were located into 23 genomic regions (quantitative trait loci, QTLs) on 14 autosomal and X chromosomes in Sus scrofa Build 10.2 assembly. Out of the 23 QTLs with the suggestive significance level ($5{\times}10^{-4}$), three QTLs exceeded the genome-wide significance threshold ($1.15{\times}10^{-6}$). Except the one on Sus scrofa chromosome (SSC) 7 which was reported previously all the QTLs are novel. In addition, we identified 5 promising candidate genes, including cell division cycle 7 for abdominal circumference, pleiomorphic adenoma gene 1 and neuropeptides B/W receptor 1 for both body weight and cannon bone circumference on SSC4, phosphoenolpyruvate carboxykinase 1, and bone morphogenetic protein 7 for hip circumference on SSC17. Conclusion: The results have not only demonstrated a number of potential genes/loci associated with the growth-related traits in pigs, but also laid a foundation for studying the genes' role and further identifying causative variants underlying these loci.

• The Journal of Advanced Prosthodontics
• /
• 제2권3호
• /
• pp.106-110
• /
• 2010

The severe wear of anterior teeth facilitates the loss of anterior guidance, which protects the posterior teeth from wear during excursive movement. The collapse of posterior teeth also results in the loss of normal occlusal plane and the reduction of the vertical dimension. This case report describes 77-year-old female, who had the loss of anterior guidance, the severe wear of dentition, and the reduction of the vertical dimension. Occlusal overlay splint was used after the decision of increasing vertical dimension by anatomical landmark, facial and physiologic measurement. Once the compatibility of the new vertical dimension had been confirmed, interim fixed restoration and the permanent reconstruction was initiated. This case reports that a satisfactory clinical result was achieved by restoring the vertical dimension with an improvement in esthetics and function.

• International journal of advanced smart convergence
• /
• 제12권4호
• /
• pp.443-450
• /
• 2023

One of the basic tasks in the automobile manufacturing process is to design a bare chassis, which is the basic frame of a vehicle, and a bracket is a member connecting various devices to the frame. Bracket, which is a member connecting the engine, transmission, and suspension, which are the core devices of driving and operating the vehicle, to the frame, must maintain safety during vehicle operation. If the bracket connecting the various devices constituting the vehicle to the frame does not have durability, serious accidents may occur during operation of the vehicle. In this study, we performed stress analysis on the brackets installed in the bare chassis of the 25-passenger bus in the development stage. Based on the stress analysis performed, an improved bracket dimension was proposed.

• 구강회복응용과학지
• /
• 제18권3호
• /
• pp.185-195
• /
• 2002

Purpose This article describes the historic and clinical aspects of the determination of the vertical dimension of occlusion and the synoptic procedure of the determination of the vertical dimension of occlusion in complete denture. The determining procedure of the susceptible vertical dimension of occlusion is one of the most important steps in construction of complete denture and prosthodontic treatment. It is considered essential for the improvement and the recovery of facial esthetics and stomatognathic functions. Results Several methods have been suggested for measurement of the vertical dimension of occlusion in the construction of complete denture and the prosthodontic rehabilitation. These range from pre-extraction records to the use of physiologic rest position, swallowing, phonetics, esthetics and facial proportion, etc. But, there is no universally accepted or completely accurate method. There seems to be no significant advantages of one technique other than those of cost, time and equipment requirements, and seems to be in controversial in determining the vertical dimension. Conclusion The vertical dimension of occlusion should be determined and reinspected carefully by dentist for a successful prosthesis with several methods. The more investigations are necessary for more objective and scientific techniques in determining the vertical dimension of occlusion.

• 품질경영학회지
• /
• 제45권1호
• /
• pp.11-24
• /
• 2017

Purpose: This study is on the priority for improving students satisfaction in university educational service. It explores the dimension of service quality and analyzes the relationship among quality elements, service satisfaction, and loyalty. Methods: This paper performs empirical studies by questionnaire survey. The Timko model is used for finding the degree of possible improvement of quality elements, and structural equation and regression models are used to analyze the effect of them on service satisfaction and loyalty. Also, explanatory factor analysis is used to investigate the quality determinants. Results: The quality dimension is composed of curriculum, employment support, interaction with outsiders, start-up support, learning support, counselling, and administration service. Curriculum, learning support, and administration service are positively correlated with service satisfaction, and service satisfaction has a positive effect on loyalty. Counselling service is an attractive element, and curriculum, start-up support, and learning support are indifferent elements. Conclusion: Comprehensive analysis shows that curriculum, academic advisor, and administration service have high priorities for improving educational service satisfaction.

• ETRI Journal
• /
• 제27권2호
• /
• pp.188-194
• /
• 2005

We report on the improvement of critical dimension (CD) linearity on a photomask by applying the concept of process proximity correction to a laser lithographic process used for the fabrication of photomasks. Rule-based laser process proximity correction (LPC) was performed using an automated optical proximity correction tool and we obtained dramatic improvement of CD linearity on a photomask. A study on model-based LPC was executed using a two-Gaussian kernel function and we extracted model parameters for the laser lithographic process by fitting the model-predicted CD linearity data with measured ones. Model-predicted bias values of isolated space (I/S), arrayed contact (A/C) and isolated contact (I/C) were in good agreement with those obtained by the nonlinear curve-fitting method used for the rule-based LPC.

• 대한치과보철학회지
• /
• 제35권1호
• /
• pp.211-220
• /
• 1997

This article describes verticsal dimension in its histologic and clinical aspect. Determination of correct vertical dimension of occlusion is one of the most important steps in prosthodontic rehabilitation. It is considered essential for improvement of facial esthetics and stomatognatic functions. Many techniques have been sued for measurement of the vertical dimension in dentulous and edentulous patients : pre-extraction record, physiologic rest position, swallowing, phonetics, esthetics, etc. But, there is no universally accepted or completely accurate method. Though a great deal of energy has been spent trying to find the exact position of the mandible, there is an controversial aspect of vetical dimension.

• 대한치과의사협회지
• /
• 제54권6호
• /
• pp.438-446
• /
• 2016

Severe tooth wear may cause the pathologic change of the TMJ and masticatory muscles, unesthetic facial appearance, pathogenic pulp and occlusal disharmony. Treating patients with severely worn dentition often requires full mouth rehabilitation with increasing vertical dimension. Proper diagnosis and treatment planning are important for esthetic and functional definitive restorations and the long term stability of the neuromuscular system and the TMJ. In this case, 66 year-old female presented with generalized worn dentition. Based on assessment, pathologic destruction of teeth structure on entire dentition was caused by masticatory force and diet habit without loss of vertical dimension. Subsequently, 3 mm increase of vertical dimension that based on incisor for tooth restoration and esthetic improvement was determined. After 8 weeks stabilization period with temporary fixed prostheses, definitive prostheses were fabricated. After 6 months follow up period, satisfactory outcomes were attained both functional and esthetic aspects through this procedure.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.29-33
• /
• 2003

The improvement of dimensional accuracy for forged part is one of major goals in cold forging industry. There are many problems in controlling the dimension only by the trial-and-error, especially for a precision forged gear. A FEM analysis has been used in developing the forging technology. However, FE techniques have to be reconfirmed for predicting accurately the dimension of forged part. In this study, the effects of elastic characteristics and temperature changes are investigated by the comparisons between experimental and FEA in cold forging. When FE models related with elastic characteristics are considered as reality, FE results could predict the part dimension within the range of 10 $\mu\textrm{m}$. And if temperature also is considered really, the predicted dimensions are well coincided with the experimental down to about 5$\mu\textrm{m}$.