• Journal of Korean Vacuum Science & Technology
• /
• 제2권1호
• /
• pp.49-54
• /
• 1998

The effect of deposition paratmeters on the solid-phase crystallization of amorphous silicon films deposited by plasma-enhanced chemical vapor deposition has been investigated by x-ray diffraction. The amorphous silicon films were prepared on Si(100) wafers using SiH4 gas with and without H2 dilution at the substrate temperatures between 12$^{\circ}C$ and 38$0^{\circ}C$. The R. F. powers and the deposition pressures were also varied. After crystallizing at $600^{\circ}C$ for 24h, the films exhibited (111), (220), and (311) x-ray diffraction peaks. The (111) peak intensity increased as the substrate temperature decreased, and the H dilution suppressed the crystallization. Increasing R.F. powers within the limits of etching level and increasing deposition pressures also have enhanced the peak intensity. The peak intensity was closely related to the deposition rate, which may be an indirect indicator of structural disorder in amorphous silicon films. Our results are consistent with the fact that an increase of the structural disorder I amorphous silicon films enhances the grain size in the crystallized films.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제38권2호
• /
• pp.9-15
• /
• 2006

Neutral sizing is required for linerboard to solve the troubles in strength and process caused by recycled raw materials. AKD sizing efficiency can be influenced by process condition like white water quality, fines retention and so on. Therefore, this study was aimed to evaluate sizing performance of general and fast cure type AKDs using process water obtained from linerboard mill. To evaluate effect of process water quality on AKD sizing, white water was diluted with tap water at the different dilution ratios and UKP slurry was sized using the prepared water. Also, effects of inorganic and organic ion material on sizing were examined. When white water was used for stock forming, UKP sheet showed very low sizing degree. Sizing degree of sheet was increased with increase of dilution ratio because water quality was improved. Especially anionic organic material had a greater influence on AKD sizing than inorganic material. When white water quality was deteriorated, fast cure type AKD showed superior sizing performance to general type AKD.

• Food Science and Biotechnology
• /
• 제15권6호
• /
• pp.866-870
• /
• 2006

The maintenance of physiological activity during dilution is very critical for the accurate enumeration of Vibrio spp. in marine samples. We investigated the effect of various diluents on the recovery of Vibrio parahaemolyticus using the direct plate counting and most probable number (MPN) methods. The effects of NaCl (0.85 and 3%) and pH (from 6.6 to 7.4) in diluents based on distilled water or phosphate buffered saline (PBS) were evaluated with three V. parahaemolyticus strains. PBS-3% NaCl (pH 6.6), as opposed to PBS, was the most effective diluent at maintaining viable cell numbers up to 2 log CFU/g during dilution for direct plate counting using on thiosulfate citrate bile salts sucrose (TCBS) selective agar, as well as minimizing the difference in cell numbers between TCBS and non-selective nutrient agar. It also increased counts of V parahaemolyticus inoculated into oysters relative to PBS (p<0.01), suggesting that PBS-3% NaCl (PH 6.6) can reduce the problem of underestimating V. parhaemolyticus counts using PBS alone.

• YAKHAK HOEJI
• /
• 제40권6호
• /
• pp.653-658
• /
• 1996

As part of our search for less toxic antimicrobial agents from natural resources. rutin was isolated from Sophora japonica and then hydrolyzed to quercetin. Antimicrobial activity of quercetin was tested in vitro against five kinds of gram positive and ten kinds of gram negative bacteria by serial broth dilution method. Among fifteen kinds of bacteria tested, the antimicrobial activity of quercetin was the most potent against Proteus vulgaris showing minimal inhibitory concentration(MIC) of 125 ${\mu}$g/ml. To investigate the effect of antimicrobial combinations of quercetin with four kinds of antibiotics (ampicillin, cefazolin, oxytetracycline and chloramphenicol). the fractional inhibitory concentration index (FICI) was determined by checkerboard assay for each strain. The antimicrobial combinations of quercetin with four kinds of antibiotics resulted in synergism in one instance, additive effect in four instances, but no antagonism was observed.

• Journal of the Korean Society of Combustion
• /
• 제17권4호
• /
• pp.51-59
• /
• 2012

Experimental study in coflow jet flames has been conducted to investigate the helium-dilution effect of coflow air on self-excitation. For various helium mole fractions and jet velocities, two types of self-excitation were observed: buoyancy-driven self-excitation and Lewis-number-induced self-excitation(here after called Le-ISE) coupled with buoyancy-driven one. The difference between buoyancy-driven and Le-ISE is clarified by using the Mie-scattering visualization as well as exploring the different features. The mechanism of Le-ISE is proposed. When the system Damk$\ddot{o}$hler number was lowered, Le-ISE is shown to be launched. Le-ISE is closely related to heat loss, in that it can be launched in even methane jet flame (Lewis number less than unity) with helium-diluted coflow air. Particularly, Le-ISE becomes significant as the Damk$\ddot{o}$hler number decreases and heat-loss becomes significant.

• Journal of Conservation Science
• /
• 제37권6호
• /
• pp.679-688
• /
• 2021

In this study, we investigated the applicability of a termiticide based on metofluthrin for termite control on traditional wooden buildings. To evaluate their mortality, termites were exposed to the agent, diluted to various concentrations, for seven days; it was found that it had a sufficient insecticidal effect although there was a difference depending on the degree of agent dilution. Next, the effect on Dancheong, used in traditional wooden structures, was measured based on the color change according to the number of agent treatments. The results showed that only the color difference value of two pigments (i.e., Bun and Juhong) was measured as 3.0 or higher. However, there this varied according to the dilution ratio. Thus, it was found that most pigments had little effect on the color of Dancheong. Finally, the termiticidal efficacy of the agent when applied to wood was evaluated. We found that the specimens coated with 10-fold and 20-fold dilutions exhibited 2.83 and 6.28% mass loss, respectively. The 10-fold dilution satisfied the performance of termiticide as a mass loss of less than 3%. In conclusion, the metofluthrin-based agent used in this study has little effect on various Dancheong pigments and has a termiticidal effect against termites; it is therefore suggested that it may be used in preserving traditional wooden cultural properties in Korea.

• The Journal of the Petrological Society of Korea
• /
• 제10권3호
• /
• pp.190-201
• /
• 2001

Isotope Dilution Mass Spectrometry(IDMS) is one of the analytical method which uses enriched isotope spikes and analyzes the abundance of element by comparison of the spectrum between spiked mass and non-spike mass. Especially, the Thermal Ion Mass Spectrometry with isotope dilution technique (in general ID-TIMS) is the most accurate method of the chemical analysis, which enables us to obtain the data better than 1% in accuracy and precision. In IDMS, enriched isotope spike is one of the most important factor in order to obtain the best data. For rare earth elements, in general, a mixture of /sup 138/La, /sup 142/Ce, /sup 145/Nd, /sup 149/Sm, /sup 151/Sm, /sup 151/Eu, /sup 157/Gd, /sup 163/Dy, /sup 167/Er, /sup 171/Yb, and /sup 176/Lu is used as composite spike. IDMS is very useful in geochronology and REE geochemistry. Especially, it is very effective in studying the “tetrad effect” of rare earth elements in natural samples.

• Korean Journal of Materials Research
• /
• 제22권1호
• /
• pp.54-60
• /
• 2012

The particle size of MgO was examined as a function of the Na content in $Mg(OH)_2$ powders and the calcination temperature. $Mg(OH)_2$ suspension was obtained by dropwise precipitation of $Mg(NO_3)_2{\cdot}6H_2O$ and NaOH solutions. The suspension was diluted by varying the dilution volume ratio of distilled water to $Mg(OH)_2$ suspension to change the Na salt concentration in the suspension. $Mg(OH)_2$ slurry was filtered and dried at $60^{\circ}C$ under vacuum, and then its $Mg(OH)_2$ powder was calcined to produce MgO with different amount of Na content at $500\sim900^{\circ}C$ under air. Investigation of the physical and chemical properties of the various MgO powders with dilution ratio and calcination temperature variation was done by X-ray diffraction, transmission electron microscopy, BET specific surface area and thermal gravimetric analysis. It was observed that MgO particle size could depend on the condition of calcination temperature and dilution ratio of the $Mg(OH)_2$ suspension. The particle size of the MgO depends on the Na content remaining in the $Mg(OH)_2$ powder, which powder was prepared by changing the dilution ratio of the $Mg(OH)_2$ suspension. This change increased as the calcination temperature increased and decreased as the dilution ratio increased. The growth of MgO particle size according to the increase of temperature was more effective when there was a relatively high content of Na. The increase of Na content lowered the temperature at which decomposition of $Mg(OH)_2$ to MgO took place, thereby promoting the crystal growth of MgO.

• Korean Journal of Animal Reproduction
• /
• 제3권1호
• /
• pp.30-35
• /
• 1979

A, B and C dilutors were used to make Ka (A plus B (1 : 1)) and Na (B plus C(1 : 1)) dilutors in this experiment. Three aliqots of semen were respectivly diluted 1 : 1 and 1 : 2 (semen: dilutor) with Ka, Na and C dilutors and stored at 5$^{\circ}C$ for 7 days in order to study their livability during storage. Fertility was checked for the diluted semen with Ka, Na and C dilutors. Whole semen and extended semen with Na dilutos with and without DMSO were cold shocked at various temperatures for 10 min. Effects of different 1st and 2nd dilution with A, B, C and Na dilutors and of vessels on freezability of spermatozoa were investigtigated. 1. Extended semen 1 : 2 with Na and C dilutors showed highest live sperm index during storage for 7 days at 5$^{\circ}C$. 2. The components of Na dilutor per 100$m\ell$ were skim milk 2.5g, trisaminomethane 0.54g, citric acid 0.265g, glucose 2.835g, fructose 1.5g, sodium lauryl sulfate, 0.08g, penicillin 0.06g, streptomycin 0.075g, and egg yolk 10$m\ell$. 3. Fertility of diluted semen was higher than that of whole semen. Ka dilutor showed higher fertility than Na and C dilutors, and there was no difference in the fertility between Na and C dilutors. 4. Na dilutor with DMSO showed slightly higher livability than Na dilutor without DMSO during storage for 7 days at 5$^{\circ}C$. 5. Cold shock at 1$0^{\circ}C$ for 10 min. decreased greatly the sperm livalility of whole semen but not of extended semen with Na dilutor. Addition of DMSO to Na dilutor has no effect in prevention of cold shock. 6. The extended semen with C. C dilutor (1st and 2nd dilution with C and C dilutor) showed higher post-thawing sperm livability than A.A and Na. B dilutors. Na. B dilution shwed higher post-thawing sperm livability than A.A dilution. There was no difference in the post-thawing livability between semen in 1$m\ell$ straw and 10$m\ell$ aluminium package.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제6권2호
• /
• pp.301-312
• /
• 1996

This study was performed to search a optimal analyzing method of cadmium in whole-blood. Cadmium was determined by graphite furnace atomic absorption spectrometry(GFAAS). We investigated the effect of ashing temperature on the absorbance of cadmium in a simple dilution(ten-fold) method with triton X-100 and matrix modifier methods treated with $NH_4H_2PO_4$(1 and 3%) and $Pd(NO_3)_2$(0.00l and 0.005%) as matrix modifier. We also compared the reported reference values of standard blood with values resulted from optimal analyzing conditions of this study. In case of a simple dilution method, when ashing temperature was set at $450^{\circ}C$, the absorbance of sample and background were $0.334{\pm}0.012$ and $1.382{\pm}0.245$, respectively. Background level was higher than the value(0.8) that can be corrected by $D_2$ background correction method. As ashing temperature was rised to $500^{\circ}C$, the absorbance of sample and background were $0.178{\pm}0.008$ and $0.711{\pm}0.223$ respectively. The higher ashing temperature($450^{\circ}C-650^{\circ}C$) was, the lower the absorbance of sample was. In case of a matrix modifier method with $NH_4H_2PO_4$(1 and 3%), when ashing temperature was rised from $500^{\circ}C$ to $650^{\circ}C$, the absorbance of sample slightly changed. The absorbances of sample at $600^{\circ}C$ were $0.230{\pm}0.017$ and $0.137{\pm}0.012$, respectively. These values were larger than that of simple dilution method. But the absorbance of background was higher than the level that can be corrected by $D_2$ method. In case of a matrix modifier method with $Pd(NO_3)_2$(0.001 and 0.005%), the absorbance of sample and background were higher than those of other methods and were stable and reproducible. When ashing temperature was over $550^{\circ}C$, the absorbance of sample was significantly decreased. In case of 0.005% $Pd(NO_3)_2$ carbon residue remained in graphite tube affected the absorbance of sample and background. From these results, We propose that in case of a simple dilution(ten-fold) method with triton X-100 ashing temperature must be maintained below $400^{\circ}C$. In order to diminish the absorbance of background, the alternative method is attenuation of injection volume or multiplication of dilution ratio. We recommend $Pd(NO_3)_2$ than $NH_4H_2PO_4$ as a matrix modifier. In case of a matrix modifier method with $Pd(NO_3)_2$ ashing temperature might be maintained below $550^{\circ}C$.