• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.231-238
• /
• 2007

This paper describes the availability of the forthcoming integrated GNSS(Global Navigation Positioning System) positioning that includes GPS(Global Positioning System), Galileo, and QZSS(Quasi-Zenith Satellites System). We built a signal propagation model that identifies direct, multipath, and diffraction signals, using the principles of specular reflection and ray tracing technique. The signal propagation model was combined with 3D GIS(three-dimensional geographic information system) in order to measure the satellite visibility and positioning error factors, such as the number of visible satellites, average elevation of visible satellites, optimized DOP(dilution of position) values, and the portion of multipath-producing satellites. Since Galileo and QZSS will not be fully operational until 2010, we used a simulation in comparing GPS and GNSS positioning for a $1km{\times}1km$ developed area in Shinjuku, Tokyo. To account for local terrain variation. we divided the target area into 40,000 $5m{\times}5m$ grid cells. The number of visible satellites and that of multipath-free satellites will be greatly increased in the integrated GNSS environment while the average elevation of visible satellites will be higher in the GPS positioning. Much decreased PDOP(position dilution of precision) values indicate the appropriate satellite/user geometry of the integrated GNSS; however, in dense urban areas, multipath mitigation will be more important than the satellite/user geometry. Thus, the efforts for applying current technologies of multipath mitigation to the future GNSS environment will be necessary.

• Journal of Soil and Groundwater Environment
• /
• v.18 no.3
• /
• pp.1-10
• /
• 2013

This study was performed to summarize application of ${\delta}^{13}C$, ${\delta}^{37}Cl$ and ${\delta}D$ of trichloroethylene (TCE) to studies on environmental forensic field regarding identification of TCE sources and evaluation of contribution of TCE to groundwater using data collected from literatures. ${\delta}^{13}C$, ${\delta}^{37}Cl$ and ${\delta}D$ of TCE give some information regarding sources of TCE because they show specific value according to manufacturing method. Also, TCE do not show a significant isotopic fractionation owing to adsorption and dilution. The isotopic fractionation mainly occurs by biodegradation. In addition, isotopic fractionation factor for TCE is different according to a kind of microorganism participated in biodegradation. However, the isotopic data of TCE have to be applied with chemical compositions of TCE and other hydrogeologic factors because isotopic fractionation of TCE is influenced by various factors.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.7
• /
• pp.1316-1323
• /
• 2017

Geosmin and 2-methylisoborneol (2-MIB), responsible for earthy or musty smell, are a major concern for safe drinking water supplies. This study investigated the effects of environmental factors on odorous compound production and cell growth in cyanobacterial strains. Anabaena sp. FACHB-1384, a 2-MIB producer, was sensitive to low temperature (<$20^{\circ}C$). However, geosmin producers, Anabaena sp. Chusori and Anabaena sp. NIER, were sensitive to high light intensity (>$100{\mu}mol/m^2/sec$), but not to low temperature. Geosmin concentrations increased under higher nitrate concentrations, being linearly proportional to cell density. A P-limited chemostat showed that P-stress decreased the geosmin productivity and extracellular geosmin amount per cell in Anabaena sp. NIER. However, only 2-MIB productivity was reduced in Planktothrix sp. FACHB-1374 under P-limitation. The extracellular 2-MIB amount per cell remained constant at all dilution rates. In conclusion, high light intensity and P-stress can contribute to the lower incidence of geosmin, whereas 2-MIB reduction could be attainable at a lower temperature.

• International Journal of Concrete Structures and Materials
• /
• v.4 no.1
• /
• pp.55-62
• /
• 2010

The performance evaluation of a sodium lauryl sulfate to qualify as a foaming agent is presented in this paper. When new surfactants are used a systematic study of production parameters on the foam characteristics needs to be undertaken unlike proprietary foaming agents and foam generator for which manufacturer has predefined the parameters. The relative influence of the foam parameters and optimization of factors were carried out through a systematic experiment design. The foam production parameters namely foam generation pressure and dilution ratio of foaming agents are observed to have significant effect on all foam characteristics with the exception of foam output rate on which only foam generation pressure has influence. The foam with good initial foam density need not necessarily be stable foam. The optimum levels of foam production parameters are determined for the surfactant Sodium lauryl sulfate which can be used to produce stable foam for foam concrete production.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.3
• /
• pp.56-66
• /
• 1995

To investigate environmental impacts of inland fish- farms on the water quality of a stream, environmental parameters including physical, chemical and biological factorswere estimated at trount- farm in 1994. Influences( F-1) were polluted as passing through fish tank( F-2) and settle pond( F-3), so organic and inorganic nutrient concentrations became very high in effluents( F-4). BOD$_{5}$, Chl. a, Nitrite and heterotrophic bacterial numbers in the junction site(5-2) of F-4 and S-1( upstream) were highest among the stream sites. BOD$_{5}$ was proved to a good parameter of organic pollution, and nitrite of Inorganic nutrients in the fishery and it's affected stream, The high concentration of BOD$_{5}$ and Chl. a in S-2 were decreased in downstream(5-3, 5-4). It seems that this results are due to dilution or sedimentation effect. This supposition requires further testing about the sediment of stream. The results of this paper demonstrate that fish farming can deteriorate water quality of a stream by changing environmental factors.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2471-2476
• /
• 2007

A series of titanium complexes containing terdentate β-ketoiminate ligands were found to be efficient for the ring-opening polymerization of ε-caprolactone (ε-CL), producing poly(ε-caprolactone) (PCL) with bimodal distribution. Steric factors imposed by methyl substituents on the back bone of the alkoxy group affected significantly the polymerization rate and physical properties of the resulting PCL. Intra- and intermolecular transesterifications rather than disproportional rearrangements were responsible for the bimodal behavior and for the change in the molecular weight (Mw). Dilution with toluene reduced yield, and lowered polydispersity (PDI) and Mw of PCL, while the catalytic activities of the dimeric complex, [Ti(Oi-Pr)2(N-alkoxy-β- ketoiminate)]2 and Ti(Oi-Pr)4 were not sensitive to the added solvent. The dimeric complex showed living character, while other catalysts suffered from chain termination reactions.

• Mycobiology
• /
• v.35 no.4
• /
• pp.191-195
• /
• 2007

The colonization pattern and extent of decay produced in paddy stubble by soil inhabiting mycoflora were done by using nylon net bag technique. Among the three methods used for isolation of fungi, dilution plate technique recorded the highest number of fungi followed by damp chamber and direct observation method. Nutrient availability and climatic conditions (temperature, humidity and rainfall) influenced the occurrence and colonization pattern of fungi. Maximum fungal population was recorded in October ($48.99{\times}10^4/g$ dry litter) and minimum in May ($11.41{\times}10^4/g$ dry litter). Distribution of Deuteromycetous fungi was more in comparison to Zygomycetes, oomycetes and ascomycetes. In the early stage of decomposition Mucor racemosus, Rhizopus nigricans, Chaetomium globosum and Gliocladium species were found primarly whereas at later stages of decomposition preponderance of Aspergillus candidus, Torula graminis, Cladosporiun cladosporioides and Aspergillus luchuensis was recorded.

• Microbiology and Biotechnology Letters
• /
• v.27 no.2
• /
• pp.136-144
• /
• 1999

Since the condition of immobilization must be optimized, it is very important to know whether and on how conditions bacterial cells retain their metabolic activity during immobilization process. A bioluminescence intensity had the maximum value when cell concentrations were between 1.0 and 1.2 measured at O.D660. The strontium alginate was used as an immobilization matrix and two independent factors for immobilization of Photobacterium phosphoreum with strontium alginate were optimized with the response surface methodology(RSM) considering degree of bioluminescence. As a result, the optimum concentration for immobilization was found to be 2.4%(w/w) for sodium alginate and 0.31M for strontium chloride, respectively. A dilution was carried out with 2.5%(w/v) NaCl solution that is an optimum environmental condition for growth of P. phosphoreum. Under the such condition of immobilization, hardness could be predicted as 4.66$\times$104N/$m^2$ and it took different time according to the volume of matrix to be immobilized completely.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.2
• /
• pp.84-88
• /
• 2008

A bacterium growing on formaldehyde as a sole carbon source was isolated by the dilution method from an enrichment culture containing formaldehyde. The isolated strain, YK-32, was identified as Pseudomonas sp. by morphological, biochemical, and genetic analyses. Pseudomonas sp. YK-32 completely degraded 0.05% formaldehyde within 24 hrs. The isolated strain had a high level of formaldehyde dehydrogenase activity, which is thought to be one of the important factors for formaldehyde degradation, when cells were cultivated in the presence of formaldehyde.

• Journal of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.8-11
• /
• 1967

A method of determination of gold in ores has been established: Disolved ore solution is evaporated to dryness, redissolved with 0.1N HCl then chloroaurate formed is adsorbed on anion exchange resin, Dowex $1\;{\cdot}\;{\times}4$. The resin is ignited and the residue is dissolved with HCl-$HNO_3$. After evaporation of the acid, and then dilution with water, sodium azide is added. The gold is extracted with amyl alcohol from the solution buffered to pH 6. The gold is determined by measuring absorbancy of the alcohol layer spectrophotometricaly at $385m{\mu}$. Various factors, HCl concentration, amount of the resin rate, if adsorption, foreign ions, effecting to the method, have been examined. This method seems to be satisfactory for the determination of gold presented dawn to 1g per metric ton in ore.