In this paper, we developed a physically-based micromechanical model for inelastic deformation of ceramic powders. The aggregate response of ceramic particles was modeled using the two-surface yield function which considered the shear-induced dilatancy caused by friction, rolling resistance and cohesion between powder particles and consolidation caused by plastic deformation of powder themselves under high compression. The constitutive equations were implemented into the user-subroutine VUMAT of finite element program ABAQUS/Explicit. The material parameters in the constitutive model were identified by calibrating the model to reproduce data from triaxial compression tests and simple compression tests. The density distribution obtained by using the proposed model was in good quantitative agreement with the experimental results of the triaxial compression and cold isostaic compression as well.
Vibration triaxial compression test was put in influence for liquefaction strength of fine grained soil of dredged and reclaimed ground and consideration for fine fraction content, relative density, overconsolidation ratio and plasticity index in this study. By the results of these test, the liquefaction strength increased with fine fraction content and the relative density, overconsolidation ratio incresed with liquefaction strength too. However, in the case of nonplastic silt was the smalist liquefaction strength which influenced by dilatancy and interlocking when silt content was 34.7%(average grading 0.12mm). Therefore, liquefaction strength of fine grained soil of dredged and reclaimed ground increased with fine fraction content so it will help to make lower liquefaction.
Laboratory investigation reveals that rockfills exhibit significant stress-path-dependent behavior during shearing, therefore realistic prediction of deformation of rockfill structures requires suitable constitutive models to properly reproduce such behavior. This paper evaluates the capability of a strain hardening model proposed by the authors, by comparing simulation results with large-scale triaxial stress-path test results. Despite of its simplicity, the model can simulate essential aspects of the shear behavior of rockfills, including the non-linear stress-strain relationship, the stress-dependence of the stiffness, the non-linear strength behavior, and the shearing contraction and dilatancy. More importantly, the model is shown to predict the markedly different stress-strain and volumetric behavior along various loading paths with fair accuracy. All parameters required for the model can be derived entirely from the results of conventional large triaxial tests with constant confining pressures.
최근에 들어 사면이나 사면 근처에 교대등과 같이 기초하중이 비교적 큰 구조물들이 시공되는 예가 점차 많아지는 경 향을 보이고 있다. 그러나 일반적으로 사면 또는 사면 근처 에 설치되는 기초의 경우는 수평지반에 비해 지지력이 현저하게 떨어지기 때문에, 말뚝이나 케이슨 등과 같은 고가의 깊은기초들이 주로 사용되고 있는 실정이다. 따라서 토목섬유 또는 metal strip등의 보강재를 이용하여 사면을 보강하는 경제적인 공법이 필요시 되고,또한 이와같은 공법에 관련된 합리적인 기초지지력 해석법의 제시가 요구되고 있다. 본 연구에서는 사면 근처에 설치되는 얕은 기초의 지지력 보강을 목적으로 strip등의 보강재를 설치할 경우, 'wide slab effect' 개념등 Huang및 Binquet-Lee등이 모형실험등을 통해 제시한 파괴매카니즘 및 Boussinesq해법 등을 토대로 하여 보강사면에 대한 기초지지력 해석법을 제시하였다. 본 해석법에서는 soil dilatancy 등의 영향에 의한 깊이별 보강재-주변흙 사이의 마찰계수 변화를 함수형태로 표현하여 보강재주변흙 사이의 상호작용을 부분적으로 고려하였으며, 아울러 본 연구를 통해 제시된 기초지지력 해석법의 적합성 검토를 위해 Huang등이 제시한 모형실험결과와 서로 비교하였다. 이외에도, 설계에 관련된 여러 변수들이 기초지지력에 미치는 영향에 대해서도 분석이 이루어졌다.
모래지반의 지표면에 위치한 거친 바닥면을 가진 강체 연속기초와 원형기초에 대하여 수치해석을 이용하여 팽창각 변화에 따른 지지력계수 $N_{\gamma}$와 형상계수를 구하였다. 양해법(explicit method)에 기반한 유한차분해석을 이용하여 지지력계수를 산정하기 위한 수치모델과 해석절차를 개발하고, Mohr-Coulomb 소성모델을 이용하여 다양한 내부마찰각(${\phi}$)과 팽창각(${\psi}$) 범위에 대하여 지지력계수를 도출하였다. 팽창각이 감소됨에 따라 지지력도 감소하는 것으로 나타났으며, 보편적인 지지력계수 제안식들이 가정하고 있는 관련흐름법칙(associated flow-rule)이 적용된 경우(${\psi}={\phi}$)를 기준으로 비관련흐름법칙(nonassociated flow-rule)이 적용된 경우(${\psi}$ < ${\phi}$)의 상대적인 지지력 비율을 산출하였고, 일반적인 모래에 대한 관계식을 제안하였다. 원형기초의 형상계수는 연속기초의 평면변형률 조건의 고려 여부에 따라 크게 변하였으며, 평면변형률 조건을 고려하여 내부마찰각을 증가시킨 경우가 기존의 실험 결과와 유사한 경향을 나타내었다. 형상계수 제안식들의 경향이 차이를 나타내는 원인에 대하여 고찰하고 설계시 적용 방안을 제시하였다.
우리나라 해양수산부(1999) $\ulcorner$항만 및 어항설계기준$\lrcorner$ 에서는 중력식 방파제 또는 중력식 안벽의 기초의 지지력 검토시 Bishop방법을 이용하여 기초의 지지력을 계산하는 것을 표준으로 규정하구 이 때 사석의 강도정수는 대형삼축압축시험을 이용하여 정하는 것이 가장 합리적이나 여러가지 여건상 시험이 불가능할 경우에는 일본 항만기술연구소의 $\ulcorner$항만기연자료 No. 699(水上, 1991)$\lrcorner$를 인용하여 암석의 일축압축강도가 300 kg/$cm^2$이상이면 점착력 0.2kg/$cm^2$, 내부마찰각 $35^{\circ}$$^{\circ}$는 기대할 수 있다는 결과를 인용.제시하고 있다. 그러나 이에 대한 국내의 어떠한 검증도 이루어지지 않았다. 본 연구에서는 비교적 일축압축강도가 작은 북제주 다공질 현무암 사석재를 대상으로 국내최초로 대형삼축압축시험(공시체직경: 30cm, 공시체높이: 60cm)을 실시하였다. 시험결과 북제주 현무암 사석재의 일축압축 강도가 400 kg/$cm^2$보다 클 경우 c=0.3kg/$cm^2,\phi=36^{\circ}$ 의 강도정수를 사용할 수 있음을 제안하고, 입자파쇄와 다이러턴시로 대표되는 사석재의 전단 특성에 대해서도 고찰하였다.
연약점토지반에 성토 등의 상재하중을 재하하게 되면 측방유동이라고 하는 측방변위가 발생하게 된다. 이 측방유동은 파일기초의 변형, 교대의 이동, 지중매설관의 파괴 등 성토에 인접한 지중구조물에 피해를 가하게 된다. 그렇지만, 측방유동은 체적변형과 전단변형도 동시에 발생할 뿐만 아니라 이 측방유동에 영향을 미치는 인자가 많기 때문에 측방유동에 의해서 발생하는 측방토압의 발생 메커니즘이 아직 명확히 밝혀지지 않았다. 그리고 최근 근접시공 등 기존구조물에 근접해서 공사가 진행되는 경우가 많아 이러한 근접구조물에 어떠한 피해를 가할 것인가 또는 대책공법을 설계하기 위한 설계하중으로서 측방토압을 구해야 하는 필요성이 커지고 있는 것 또한 현실이다. 그러므로 본 연구에서는 성토에 의해서 연약지반에 발생하는 측방토압에 미치는 재하속도의 영향을 조사하기 위해서 실내모형실험을 실시하였다. 그 결과, 측방토압이 삼각형 분포를 이룬다는 것과 재하속도가 빠를수록 측방토압의 최대치가 커지고 부등침하가 커진다는 것을 알 수 있었다. 그리고 이러한 재하속도의 영향은 부의 dilatancy에 의한 과잉간극수압의 발생에 기인한다는 것을 알았다.
처분 환경에서는 혐기성 부식, 방사선 분해, 미생물 분해와 같은 다양한 원인으로 처분용기와 완충재의 경계면에서 기체가 발생할 수 있다. 기체의 발생 속도가 완충재 내부에서의 확산 속도보다 빠를 경우, 완충재 내부에 기체가 압축되어 공극 압력이 증가함으로써 완충재의 물리적 손상을 유발할 수 있다. 특히 이때 발생한 균열을 통해 기체돌파현상이라 불리는 급격한 기체 이동 현상과 함께 방사성 핵종이 누출될 가능성이 있다. 따라서 처분 시스템의 안전성 평가를 위해서는 이러한 기체 발생 및 이동 현상에 대한 이해가 필수적이다. 이 연구에는 완충재 내 기체 이동 현상 규명을 위한 시험 장치를 문헌 연구를 통해 구축하고, 이를 활용하여 한국형 처분 시스템의 완충재 후보 물질 중 하나인 Bentonile WRK (Clariant Ltd.) 분말로 제작한 압축 시료에 대한 기체 주입 시험을 수행하였다. 시험 결과, 완충재 내 기체돌파현상 발생 지점에서 일반적으로 관측되는 특성인 응력 및 압력의 급격한 상승 경향이 뚜렷하게 관찰되었다. 또한 완충재 팽윤으로 기인한 응력의 범위는 4.7~9.1 MPa이었으며, 기체 유입 압력으로 간주할 수 있는 기체돌파현상 발생 시의 압력은 약 7.8 MPa로 확인되었다. 구축된 장치는 향후 완충재의 초기 물성 및 기체 주입 실험 초기 조건에 대한 데이터베이스 구축을 위한 다양한 실험에 활용할 수 있을 것으로 기대된다.
It is expected that particle size distribution of any portion obtained through screening, is of more uniform than that of the original mixture, typically following such as log-normal, Rosin-Rammler distributions and so on. In this study, therefore, a new relation between parameters of the uniform distribution and flow characteristics of the coarse particle suspensions is derived based on the continuous polydisperse model (Ookawara and Ogawa, 2002b), which is derived from the discrete polydisperse model (Ookawara and Ogawa,2002a). The derived model equation predicts a linear increase of viscosity with shear rate, viz., dilutant flow characteristics. Further, the increase of viscosity is expected to be proportional to the square of volume fraction of particles, and to show the linear dependency on density and average diameter of particles. It is also shown that the uniform distribution model includes additional term that expresses the effect of distribution width. For verification of the model, the experimental results of Clarke (1967) are cited as well as in our previous work for the monodisperse model (Ookawara and Ogawa,2000) since most parameters were varied independently in his work. It is suggested that the newly introduced term expands the applicable range compared with the monodisperse model.
사질토에서의 한계상태정수 결정시 근본적인 물리적 과정들과 고유적 인 한계성들을 파악하기 위하여 일련의 표준삼축시험을 실시하였다. 시험결과에 의하면, 주어진 흙에 대하여 한계상태마찰각은 배수조건에 상관없이 일정한 반면에, e-log p'공간상에서의 한계상태선은 주로 표준삼축시험에서 충분치 못하게 도달하는 변형률과 비배수시험에서의 변형률 국지화효과 때문에 배수조건에 따라 다른 결과를 보였다. 실내시험을 통하여 한계상태정수를 산정하는 최선의 방법은 균일하고 느슨하게 성형된 시료를 배수조건하에서 전단하는 것으로 나타났다. 더불어 배수시험에서 다일러턴 시효과나 변형률 국지화효과를 피할 수 있는 시험을 계획하기 위한 참고상태정수를 제시하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.