• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2009년도 정기 학술대회
• /
• pp.567-572
• /
• 2009

본 연구에서는 국외 설계사무실과 국내 설계사무실의 수행 프로젝트(표1)를 디지털 디자인 프로세스에서의 디지털 도구 활용 사례조사 결과를 일련의 설계 프로세스(기획(Pre-Design), 계획 설계(Schematic Design) 중간설계(Detail Design), 실시설계(Construction Design))를 11개의 설계 단위작업((1)자료수집, (2)도서화작업, (3)의사소통/프레젠테이션, (4)협력업체와의 협업, (5)디자인 실험, (6)디자인분석/유효성 검토, (7)빌딩시스템과 자재선정, (8)자재비교/견적, (9)디자인 발전, (10)RP를 이용한 모델 제작, (11)시공/제작)으로 분류하여(설계프로세스별로 디지털 디자인 툴의 활용 빈도를 조사 분석하는 것은 프로세스별로 중복된 설계 단위작업이 진행됨으로 연구결과의 의미가 잘못 해석될 수 있다.) 그 활용에 대한 유형을 분석하고 이를 바탕으로 설계과정에서의 디지털 디자인 툴의 활용특성을 도출하여 실무설계의 기초자료를 제공하는데 그 목적을 둔다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.398-403
• /
• 2004

The demand of high speed machining is increasing because the high speed cutting providers high efficiency of process, short process time, improved metal removal capacity and better surface finish. Active magnetic bearings allow much high surface speed than conventional ball bearings and therefore greatly suitable for high speed cutting. The automatic control concept of magnetic bearing system provides ability of intelligent control of spindle system to increase accuracy and flexibility by means of adaptive vibration control. This paper describes a design and development of a milling spindle system which includes built-in motor with power 5.5㎾ and maximum speed 70,000rpm, HSK-32C tool holer and active magnetic bearing system. Magnetic actuators are designed for satisfying static load condition. The Performances of manufactured spindle system was examined for its static and dynamic stiffness, load capacity, and rotational accuracy. This spindle was run up to 70,000 rpm stably, which is 3.5 million DmN.

• 디지털산업정보학회논문지
• /
• 제13권1호
• /
• pp.13-21
• /
• 2017

This paper describes a design scheme of a system that tests or polls from the students at online class. By online test, the teacher can test the pre-knowledge level of the students and know how much students understand the lecture of the class. As the number of test increases, the burden of the preparation of setting question, evaluation of the test, and management of the test results is increased. In this environments, an online test management system make it easy to test and evaluate, and thus it would be a good tool for maintaining and managing the total procedure of the test or poll of the students. For evaluating the design of the system, we made a test system prototype and performed evaluations of the online test system. The online test and evaluation system provides a good tool for testing and evaluation of student's knowledge at the class with easy and fast way.

• 디지털콘텐츠학회 논문지
• /
• 제11권2호
• /
• pp.225-234
• /
• 2010

웹기반 교육은 학습자 중심의 학습과 협동학습을 촉진시킬 수 있는 새로운 수업도구로서 기존의 획일화된 교수-학습 방식에서 탈피하여 새로운 교수모형에 대한 연구로 발전되고 있다. 강력한 웹 저작도구중 하나인 플래시를 사용하면 컴퓨터 그래픽, 애니메이션과 사운드 그리고 동영상 등의 활용으로 학습의 효과를 극대화 시킬 수 있다. 본 논문에서는 플래시를 사용한 교육 자료의 개발 및 배포와 효율적인 웹기반 수업에 대하여 고찰하고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.24-28
• /
• 1996

Mirror-like polishing system of hemisphericall high-speed precision bearing for digital VTR drum was developed. Mechamism of the polishing process was analyzed in the view point of polishing contact range and contact length between the tool and the workpiece surface. It was suggested that the two stage polishing process adoptiong the diamond grinding wheel and polishing tool instead of multistage lapping processes, which enables the mass production of the bearing by reduction of polishing time.

• 전자공학회논문지D
• /
• 제35D권7호
• /
• pp.63-71
• /
• 1998

Generally, electronic packaging designer uses HSPICE SOFTWARE TOOL to validate electric characteristics of traces layout before layout traces in PCB in hundreds Mb/s high speed digital circuits. We are in need of a plated through hole (PTH) model and a connector model to use HSPICE SOFTWARE TOOL. Those models have not been perfectly defined for HSPICE simulation. In this paper, we define a PTH model and a connector model for HSPICE simulation and discuss application range for these models. Th emodels are analytic models very applicable for HSPICE simulation and are used to analyze electric characteristic of the PTH and the connector in thetraces layout in high speed digital circuit.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권11호
• /
• pp.591-598
• /
• 2000

In this thesis, a digital tracking controller is proposed for multi-axis position control system. Tracking and contouring error exist when the machine tool moves along a trajectory in multi-axis system. The proposed scheme enhances the tracking and contouring performance by reducing the errors. Also, an optimal tracking controller reduces the tracking error by the state feedback and the feedforward compensator reduces the effects of a nonlinear disturbance such as friction or dead zone. The proposed control scheme reduces the contour error which occurred when the tool tracks the reference trajectory. Finally, the performance of the proposed controller is exemplified by some simulations and by applying the real XY servo system.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.119-123
• /
• 1996

The demands for robotic and automatic system are continually increasing in manufacturing fields. There were so many studies to monitor and predict system, but it were mainly relied upon measuring of cutting force, current of motor spindle and using acoustic sensor, etc. In this study digital image of time series sequence was acquired taking advantage of optical technique. Then, mean square error was obtained from it and was available for useful observation data. The parameter was estimated using PAA(parameter adaptation algorithm) from observation data. AR model was selected for system model, fifth order was decided according to parameter estimation. Uncorrelation test was also carried out to verify convergence of parameter. Through the proceedings, we found there was a system stability.

• 디지털콘텐츠학회 논문지
• /
• 제8권4호
• /
• pp.607-613
• /
• 2007

Current changes in the written language curriculum have lead to emphasis being placed on the process involved in writing rather than the product. Writing is being viewed as a means of exploration, with text being manipulated in revision until a clear message is conveyed. This study focuses on the use of the computer in written language, as a tool to facilitate learning, increase interaction and alter children's attitudes. Some children from a local primary school participated in a project which gave them access to a computer and guidance during the process of revision. Evaluation of this study showed a two-fold effect. Firstly the writing behaviors of the children developed with their increased involvement in the process. For example, the children began to read what they had written thereby independently evaluating the content. Secondly, arising from this, as a sense of control over their writing was gained the children's attitudes towards writing became more positive.

• 디지털콘텐츠학회 논문지
• /
• 제8권4호
• /
• pp.547-553
• /
• 2007

UCC가 정보 전달 매체의 새로운 영역으로 부각되기 시작 했다. 많은 사람들이 UCC를 제작하기 시작 했으며, 기업홍보, 개인 홍보, 유통 까지 UCC의 영역은 다양하게 확대 되어 간다. UCC를 제작하기 위한 동영상 편집기는 전통적인 방법으로의 편집에 멈추어 있으며 새로운 기법이 도입도지 못한 게 현실이다. 본 논문은 새로운 UCC 제작기 설계와 시스템 구현에 대해서 제안한다. 본 시스템은 기존의 편집 프로그램과 차별되며 쉽고 빠르게 UCC 콘텐츠를 제작 할 수 있다고 판단했다.