• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.29-32
• /
• 1985

We have developed a real time digital subtraction a giographic system(RTDSA) and specified it's performance characteristics. Our RTDSA has large-capacity frame memories and a post-processing computer which enables various advanced digital image processing techniques.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.27-30
• /
• 2003

In this paper a new approach of digitalized ‘Takbon’ is introduced. By image signal processing, the letters which were written on stones can be deciphered. Epigraphic letter is detected by digital image device, digital camera. The two dimensional digital image is preprocessed because of sensor noise and detective turbulence. Color image is transformed into grey level. The letter image is analyzed in time/frequency domain. By the resultant analysis data decisive functions are calculated. Signal Processing techniques, such as scaling, clipping, digital negative, high/low filter, morphology and so on, provide algorithms that can extract letter from stones.

• 한국정보통신학회논문지
• /
• 제10권10호
• /
• pp.1773-1778
• /
• 2006

본 논문에서는 개선된 자동정리증명 기법에 기초하여 유한체상의 디지털논리 시스템을 구성하는 방법을 제안하였다. 제안한 방법은 먼저 유한체상의 중요한 학적 성질을 논의하였고 자동정리증명기법의 개념과 기본 성질을 서술하였다. 그리고 개선된 자동정리증명기법을 적용하기 위해 몇 가지 정의를 하였으며 이를 근간으로 디지털논리 시스템의 Building Block을 제안하였다. 또한, 디지털논리 시스템을 구성하기 위한 중요한 관계를 정의하였으며 최종 유한체상의 디지털논리시스템을 개선된 자동정리 증명 기법에 의해 구성하였다.

• 전자공학회논문지A
• /
• 제32A권5호
• /
• pp.749-758
• /
• 1995

There are many testable design techniques, among which Scan path and BIST techniques are mainly used. In this paper, the increase of design effectiveness is discussed, when these techniques are applied to the practical implementation of chips. The following techniques are presented : 1) Blocks are commonly used to reduce test time without hardware increase, 2) MUX is used to implement the shortest Scan path, 3) Scan register is used which controls and/or observes several blocks to avoid the increase of hardware.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.421-426
• /
• 2010

This paper presents a method of design the counter using sequential system based on synchronous techniques. For the design the counter, first of all, we derive switching algebras and their operations. Also, we obtain the next-state functions, flip-flop excitations and their input functions from the flip-flop. Then, we propose the algorithm which is a method of implementation of the synchronous sequential digital logic circuits. Finally, we apply proposed the sequential logic based on synchronous techniques to counter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.853-855
• /
• 1996

This paper describes the dissipation factor measuring techniques of insulating oil on the operating transformer by using digital signal processing. After applying voltage to the electrodes which is installed In a transformer, acquiring source voltage and current of electrodes and using cross-correlation techniques. we can check the dissipation factor of insulating oil. To Improve measuring accuracy and the speed of process, we use hardware such as TMS320C31 DSP board and analog filter and software such as cross-correlation techniques, rectangular window, and digital filtering techniques. We simulated the measuring accuracy and the degree of the noise effect of this new measuring techniques by using computer simulation, and compared the simplified measuring devices with schering bridge on degraded insulating oil. The result showed that this measuring technique can be used as diagnostic method on the pole transformers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.462-463
• /
• 1996

This study describes the dissipation factor measuring techniques of insulating oil on the operating, transformer by using digital signal processing. After applying voltage to the sensor which is installed in a transformer, acquiring source voltage and current of sensor and using cross-correlation techniques, we can check the dissipation factor of insulating oil. To improve measuring accuracy and the speed of process, we use hardware such as TMS320C31 DSP board and analog filter and software such as fast cross-correlation techniques, rectangular window, and digital filtering techniques. We simulated the measuring accuracy and the degree of the noise effect of this new measuring techniques by computer simulation, and compared the simplified measuring devices with Schering Bridge on degraded insulating oil. The result showed that this measuring technique can be used as diagnostic method on the pole transformers.

• 대한전자공학회논문지
• /
• 제26권12호
• /
• pp.1984-1994
• /
• 1989

Techniques for approximating digitalcurves by polygonal lines are a valuable tool for image analysis and data compression. S. Shilien proposed a method for segmenting a digital curve into digital straight line segments digital straight line segments which are not satisfied with the structural properties, and have more than one break point by Shilien's method. Here, the structural representation of digital straight lines and digital staight line segments is described. And a method for segmenting a digital curve into digital straight line segments which are not satisfied with the structural properties, and have more than one break point by Shilien's method. Here, the structural representation of digital straight lines and digital staight line segments is described. And a method for segmenting a digital curve into digital straight line segments which may be not satisfied with the structural properties is proposed. The number of break points extracted by this method is less than that by S. Shilien's method from the digital curve which includes the digital straight line segments not satisfied with the structural properties.

• 한국멀티미디어학회논문지
• /
• 제10권3호
• /
• pp.365-372
• /
• 2007

세계에서 생성되는 정보의 대부분은 디지털 데이터로 만들어지고 있다. 이러한 디지털 저작물들은 불법 사용이 손쉽기 때문에 법적인 보호 장치나 기법이 꼭 필요하다. 그래서 지금까지 많은 연구가들은 다양한 기법들을 개발하고 있다. 지금까지 대부분의 기법들은 디지털 저작물 침해에 관한 법적인 증거 자료 확보를 위해 디스크 검증과 같은 물리적 또는 화학적인 방법 개발에 초점을 두고 있다. 본 논문에서는 사용자가 부적당하게 저작물을 사용할 때 이를 인지하고 법적 위배 사항을 통지해 주도록 하는 컴퓨터 포렌식 기반 디지털 저작물 보호 시스템을 개발하였다. 또한 계속적으로 침해 사실이 진행된다면 이런 일련의 위배 행위를 지적재산권법 매핑에 의하여 법적 증거 자료로 사용할 수 있도록 시스템에 저장하도록 한다. 이 기법은 디지털 증거 조작이나 증거 인멸의 문제로부터 데이터를 보호할 수 있다.

• 한국분무공학회지
• /
• 제4권4호
• /
• pp.9-16
• /
• 1999

Spray angle, a parameter which is most commonly used to evaluate. spray distribution, is important because it affects the axial and radial distribution of the fuel. Spray angles were measured and compared for the pintle-type gasoline fuel injector with n-heptane as a test fuel with the three different measuring techniques, i.e. digital image processing, shadowgraphy and spray patternator, respectively. Fuel was injected with the injection pressures of 0.2-0.35MPa into the room temperature and atmospheric pressure environment. In digital image processing method, the transmittance level greatly influences the spray angle with the axial distance from the injector. From the experimental results by the shadowgraphy technique, it is obvious that the spray angle vary during the injection period. The results of spray angle from the spray patternator show that there exist the different spray angles in the different areas. The spray angles increase with the increase in the injection pressure for the three measurement techniques considered in this study. The spray angle is widely different, especially in the near region from the injector, according to the measurement techniques used in this experimental work.