• 조명전기설비학회논문지
• /
• 제22권11호
• /
• pp.30-35
• /
• 2008

An analog type turbine control system in a nuclear power plant in Korea was replaced by a digital type control system successfully. The turbine simulator was used to verify and validate the perfection of newly developed digital control system prior to its actual installation. In this paper, the newly developed turbine speed control system, ie. governor will be introduced together with how to simulate entire control loop. After that, we will compare the comparison of simulation result in laboratory with pre startup simulation result. Eventually the performance of actual operation result was testified.

• Design & Manufacturing
• /
• 제17권3호
• /
• pp.1-7
• /
• 2023

Blow molding is a manufacturing process in which thermoplastic preforms are preheated and then pneumatically expanded within a mold to produce hollow products of various shapes. The two-step process, a type of blow molding method, requires the output of multiple infrared lamps to be adjusted individually, so the process of finding initial conditions hinders productivity. In this study, digital twin technology was applied to solve this problem. A blow molding simulation technique was established and simulation-based metadata was generated. A response surface ROM (Reduced Order Model) was built using the generated metadata. Then, a dynamic ROM was constructed using the results of 3D heat transfer analysis. Through this, users can quickly check the product wall thickness uniformity according to changes in the control value of the heating lamp for products of various shapes, and at the same time, check the temperature distribution of the preform in real time.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.131-141
• /
• 2021

Simulation is a widely used functional verification method for FBD programs of PLC-based digital I&C system in nuclear power plants. It is difficult, however, to estimate the thoroughness (i.e., effectiveness or quality) of a simulation in the absence of any clear measure for the estimation. This paper proposes two sets of structural coverage adequacy criteria for the FBD simulation, toggle coverage and modified condition/decision coverage, which can estimate the thoroughness of simulation scenarios for FBD programs, as recommended by international standards for functional safety. We developed two supporting tools to generate numerous simulation scenarios and to measure automatically the coverages of the scenarios. The results of our experiment on five FBD programs demonstrated that the measures and tools can help software engineers estimate the thoroughness and improve the simulation scenarios quantitatively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.113-114
• /
• 2011

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.147.3-147
• /
• 2001

We have proposed a digital control method, where the controlled variable is a joint angular velocity, of space robot manipulators using the transpose of Generalized Jacobian Matrix. The explicit relationship between the control law and the sampling period, however, is unknown because the controller gains include the sampling period implicitly. This paper presents a novel digital control method which explicitly describes the relation between the sampling period and the controller gains. Computer simulation of a 3-DOF planar space robot manipulator is peformed. Simulation result demonstrates the effctiveness of the proposed method.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제22권3호
• /
• pp.299-313
• /
• 2015

In this paper, we show the effectiveness of copulas by comparing the correlation of market data of year 2010 with those of years 2006-2009 and investigate copula functions as pricing methods of digital and rainbow options through real market data. We propose an accurate method of pricing rainbow options by using the correlation coefficients obtained from the copula functions depending on strike prices between assetes instead of simple traditional correlation coefficients.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.206-211
• /
• 1998

In audio techniques calculation of digital filters is accelerated considerably by use of wave variables instead of voltages and currents. The suitability of wave variables for digital simulation of power converters was investigated and the results are reported in this paper. The original method is described briefly, modelling of switches and diode rectifiers is presented, examples are given and the features of the method are discussed.

• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.78-83
• /
• 2007

In this paper, the digital model of the micro-factory has been established, inspected and evaluated by progress of assembly, manipulation and examination. The new paradigm of the system analysis is realized by digital simulation of the factory. The digital manufacturing system of the micro-factory was simulated through UML(Unified Modeling Language) with the object-oriented logical model analysis method and then the micro lens module assembly system was simulated with MST(Micro System Technology) Application Module.

• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1439-1445
• /
• 2009

본 논문에서는 디지털 도어록 혼류 조립 공정에서의 시뮬레이션 분석모델을 제안한다. 이 모델의 목적은 디지털 도어록 생산 공정 설계에 있어서 여러 대안의 성능에 대해 평가하는 것이다. 시뮬레이션 모델을 개발하기 위하여 먼저 시간연구가 수행되었다. 동시에 ARENA 시뮬레이션 도구를 이용하여 공정분석을 수행하였다. 그 결과 현재의 디지털 도어록 혼류 생산 공정은 여러 품종의 수요 증가에 적절한 생산방식을 제공하지 못한다는 문제점을 발견하였고 이를 개선하기 위한 대안을 제안하였다.

• 한국CDE학회논문집
• /
• 제15권2호
• /
• pp.94-105
• /
• 2010

Todays, there is fast transition about the new manufacturing IT methodologies from the conceptual phase into the practical application phase for the strengthening of enterprise competitiveness in manufacturing industry. One of those new methodologies is PLM (Product Life-cycle Management). PLM methodology consists of 3D CAD for the product design, PDM (Product Data Management) for the data management based on the collaboration platform and lastly DM (Digital Manufacturing). DM has evoluted from the stand-alone computer simulation of early 1980s, and now it covers the overall production development and production. Unfortunately, there exist serious critical problems about the actual application of DM for the real work. This is owing to the transition of the point of view from stand-alone type application (such as flow simulation or robot simulation) to that of business process about product development and production management. In this paper, we propose an application framework for the successful project with the digital manufacturing methodology with the concept of Information Strategy Planning, which enables the systematic diagnosis and the quantitative evaluation. Also, we introduce the actual practice of the proposing framework with the ISP project for 'Analysis & Simulation Technique of manufacturing process project' that is being conducted by Chungnam Techno Park.