• 한국광학회:학술대회논문집
• /
• 한국광학회 1999년도 제16회 광학 및 양자전자 학술발표회Proceedings of 16th Optics and Quantum Electronics Conference, 1999
• /
• pp.160-161
• /
• 1999

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.229-235
• /
• 2017

Until now, a study on a ubiquitous sensor network has been mainly concentrated in the areas of sensor nodes, and as a results, technologies related with sensor node were greatly developed. Despite of many achievements on research and development for a sensor node, a ubiquitous sensor network may failed to establish the actual service environment because variety of restrictions. In order to provide a actual service using a ubiquitous sensor networks applied to many results on research and development for a sensor nodes, a study on a wired/wireless composite router must be carried out. However a study on a wired/wireless composite router is relatively very slow compared with the sensor node. In this study, developed a high-performance router platform supporting IPv6 that can provide high-speed wired/wireless interface and QoS, and it can provide the multimedia service Interlocking the wireless sensor network and the Internet network. To analysis a given network environment and to develop the appropriate hardware and software in accordance with this requirement.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권1호
• /
• pp.10-16
• /
• 2016

In this paper, a design for a fully digital voltage sensor using a 32-nm fin-type field-effect transistor (FinFET) is presented. A new characteristic of the double gate p-type FinFET (p-FinFET) is examined and proven appropriate for sensing voltage variations. On the basis of this characteristic, a novel technique for designing low-power voltage-to-time converters is presented. Then, we develop a digital voltage sensor with a voltage range of 0.7 to 1.1V at a 50-mV resolution. The performance of the proposed sensor is evaluated under a range of voltages and process variations using Simulation Program with Integrated Circuit Emphasis (SPICE) simulations, and the sensor is proven capable of operating under ultra-low power consumption, high linearity, and fairly high-frequency conditions (i.e., 100 MHz).

• 방송과미디어
• /
• 제5권1호
• /
• pp.59-71
• /
• 2000

This paper presents a survey of the CMOs-based image sensor and its applications to various real field digital camera. CMOS image sensor, called active pixel sensor (APS), has many interesting properties such ash I회 sensitivity, high speed readout, random access and lower power consumption when it is compared with CCd. this paper also addresses the state-of-the-art of CMOS image sensor, and gives some examples of its application to digital camera and special-purpose cameras. with the advancement of semiconductor technology, CMOS image sensor is a future technology for imaging system, and will be widely used in the filed of image capturing for consumer electronics and scientific measurements.

• 한국전기전자재료학회논문지
• /
• 제29권3호
• /
• pp.141-146
• /
• 2016

The AMR(automatic meter reading) system has been increasingly and widely used for its efficient and intelligent management, which is a technology that automatically collects consumption data from a water meter or energy metering device. The digital meter instead of the mechanical meter should be used in the system. Up to now, various types of sensor to measure the water flow rate have been used in the digital water meter, for example, reed switch, photo IR approximate sensor, ultrasonic sensor, electromagnetic sensor, etc. In this paper, a new sensing technology, where a variable capacitor and digital circuit were used for sensing the water flow rate, was proposed. The circuit was designed and verified by Pspice simulation. And a PCB board for the circuit was fabricated. After then, a prototype of digital water meter using a variable capacitor to measure the water flow rate was fabricated. The function tests of the fabricated digital water meter were performed, and it was found that the meter worked properly. Since the new technology has much better properties in terms of cost and power consumption compared to conventional technologies, it should be one of the major digital water meter technologies in the future.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.225-228
• /
• 2005

A context-aware services platform supporting mobile agents consists of sensor nodes and a sensor coordinator. Sensor nodes collect environmental information and transmit the collected information to the sensor coordinator through wireless sensor networks. The sensor coordinator passes the information to the context-aware service module, and the mobile agent. The context-aware service module or the mobile agent performs services suitable for a user's situation based on the environmental information and a service actuation message is delivered to an actuation node through the sensor coordinator. In this paper, we present a context-aware services platform structure employed in our project, and describe context-aware services platform interfaces with a context-aware service module and mobile agents.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.51-54
• /
• 2000

We are concerned with processing methods of the measurement values of sensors in the control system. When some faults happen to sensor components, the measurement value of sensors cause the malfunction of the plant. So it is necessary to detect and reduce the influence of faults to control with reliability for the overall system. The sensor status must be always good for best demonstration of the controller performance. A self-validating sensor detects the sensor state from the measurement value, reconstruct a soft sensor and can improve reliability of the sensor. If sensor faults, the sensor is detected and reconstructed with the best estimate from its correlation to other sensors and historical data. It is applied to the control of a flexible link system with the sensor fault problems in the light sensor module for position to show the applicability. In this paper, we propose a digital controller which reduces deflection of the moving set-point by reconstructing output of a sensor when the sensor fault is detected.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.182-182
• /
• 2003

Generally, DEM (Digital Elevation Model) is generated by stereo-images acquired same conditions, sensor type, viewing angle, capturing elevation and etc. It is difficult to generate DEM with stereo images acquired different satellite. This study intends that it is DEM generation using pair-images with other sensor systems.

• 한국지리정보학회지
• /
• 제8권1호
• /
• pp.88-95
• /
• 2005

다중센서 결합에 의한 외부표정요소 결정기법은 항공기에 탑재한 GPS와 INS로 센서의 위치와 회전각을 정확히 결정함으로써 외부표정요소 결정을 위한 지상기준점 측량을 생략하거나 또는 최소한의 기준점만을 사용하여 외부표정요소를 결정할 수 있으며, 이에 따라 지형도 제작에 대한 시간과 경비를 크게 절감할 수 있다. 따라서 본 연구에서는 다중센서 결합과 동시에 CCD 카메라를 탑재하여 동시에 측량을 하고, 외부표정요소 직접결정 기법에 의한 CCD 영상으로 수치정사영상을 제작하였다. 본 연구에서 제작된 결과물에 대한 정확도 검증을 위하여 GPS로 측량한 지상검사점을 기본으로 하여 외부표정요소 직접결정 기법에 의하여 제작된 수치정사영상의 위치 정확도를 평가하였다. 수치정사영상은 소수의 기준점을 사용한 경우와 기준점을 사용하지 않은 경우의 두 가지로 제작하였다. 다중센서에 의한 제작된 수치정사영상의 정확도는 소수의 기준점을 사용한 경우, 축척 1:1,000 지도의 정확도 기준을 만족시켰으며, 기준점이 없이 제작된 정사영상의 정확도는 축척 1:5,000 지도의 정확도 기준을 만족함을 알 수 있었다.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.858-864
• /
• 2019

본 논문에서는 센서 유틸리티 네트워크에서 센서 노드들 사이의 주파수 차이로 인한 데이터 손실을 제거하기 위한 클록 시스템이 제안된다. 각 센서 노드를 위한 제안된 클록 시스템은 버스트 클록-데이터 복원 회로, 32-위상 클록을 출력하는 디지털 위상 고정 루프, 그리고 프로그래밍 가능한 개방형 루프 분수 분할기를 사용하는 디지털 주파수 합성기로 구성된다. 첫번째 센서 노드에는 버스트 클록-데이터 복원 회로 대신 능동 인덕터를 사용하는 CMOS 발진기가 사용된다. 제안된 클록 시스템은 1.2 V 공급 전압을 이용하는 65nm CMOS 공정에서 설계된다. 센서 노드들 사이의 주파수 오류가 1%일 때, 제안하는 버스트 클록-데이터 복원 회로는 기준 클록으로 5Mbps 데이터 속도에 대해 64배 체배된 주파수를 가짐으로 4.95 ns의 시간지터를 가진다. 설계된 디지털 주파수 합성기의 주파수 변경은 100 kHz에서 320 MHz의 주파수 범위에서 출력 클록의 한 주기 내에 수행된다.