• 제목/요약/키워드: Digital pass

검색결과 431건 처리시간 0.026초

ECG 신호를 위한 디지탈 필터의 distortion 해석 (Distortion anaysis of digital filters for ECG signals)

  • 남현도;안동준;이철희;장태규
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
    • /
    • pp.817-822
    • /
    • 1992
  • Distortion analysis of digital filters for the ECG signal processing is presented. Several band pass and band reject filters are designed for the analysis. Computer simulations are performed to compare the distortions of the Butterworth type filters and linear phase optimal fitters. The designed filters are applied to power line interference cancelling in ECG signals.

  • PDF

실험적으로 제작한 Videodensitometer의 디지털 영상처리와 임상적 적용에 관한 연구 (DIGITAL IMAGE PROCESSING AND CLINICAL APPLICATION OF VIDEODENSITOMETER)

  • 박관수;이상래
    • 치과방사선
    • /
    • 제22권2호
    • /
    • pp.273-282
    • /
    • 1992
  • The purpose of this study was to propose the utility which was evaluated the digital image processing and clinical application of the videodensitomery. The experiments were performed with IBM-PC/16bit-AT compatible, video camera(CCdtr55, Sony Co., Japan), an color monitor(MultiSync 3D, NEC, Japan) providing the resolution of 512×480 and 64 levels of gray. Sylvia Image Capture Board for the ADC(analog to digital converter) was used, composed of digitized image from digital signal and the radiographic density was measured by 256 level of gray. The periapical radiograph(Ektaspeed EP-21, Kodak Co., U. S. A) which was radiographed dried human mandible by exposure condition of 70 kVp and 48 impulses, was used for primary X-ray detector. And them evaluated for digitzed image by low and high pass filtering, correlations between aluminum equivalent values and the thickness of aluminum step wedge, aluminum equivalent values of sound enamel, dentin, and alveolar bone, the range of diffuse density for gray level ranging from 0 to 255. The obtained results were as follows: 1. The edge between aluminum steps of digitized image were somewhat blurred by low pass filtering, but edge enhancement could be resulted by high pass filtering. Expecially, edge enhancement between distal root of lower left 2nd molar and alveolar lamina dura was observed. 2. The correlation between aluminum equivalent values and the thickness of aluminum step wedge was intimated, yielding the coefficient of correlation r=0.9997(p<0.00l), the regression line was described by Y=0.9699X+0.456, and coefficient of variation amounting to 1.5%. 3. The aluminum equivalent values of sound enamel, dentin, and alvolar bone were 15.41㎜, 12.48㎜, 10.35㎜, respectively. 4. The range of diffuse density for gray level ranging from 0 to 255 was wider enough than that of photodenstiometer to be within the range of 1-4.9.

  • PDF

2차 델타 시그마 변조기법을 이용한 고 정밀 및 고 안정 디지털 전자석 전원 장치에 관한 연구 (A Study on High Precision and High Stability Digital Magnet Power Supply Using Second Order Delta-Sigma modulation)

  • 김금수;장길진;김동희
    • 조명전기설비학회논문지
    • /
    • 제29권3호
    • /
    • pp.69-80
    • /
    • 2015
  • This paper is writing about developing magnet power supply. It is very important for power supply to obtain output current in high precision and high stability. As a switching noise and a power noise are the cause of disrupting the stability of output current, to remove these at the front end, low pass filter with 300Hz cutoff frequency is designed and placed. And also to minimize switching noise of the current into magnet and to stop abrupt fluctuations, output filter should be designed, when doing this, we design it by considering load has high value inductance. As power supply demands the stability of less than 5ppm, high precision 24bit(300nV/bit) analog digital converter is needed. As resolving power of 24bit(300nV/bit) analog digital converter is high, it is also very important to design the input stage of analog digital converter. To remove input noise, 4th order low pass filter is composed. Due to the limitation of clock, to minimize quantization error between 15bit DPWM and output of ADC having 24bit resolving power, ${\Sigma}-{\Delta}$ modulation is used and bit contracted DPWM is constituted. And before implementing, to maximize efficiency, simulink is used.

Real-Time Maximum Power Point Tracking Method Based on Three Points Approximation by Digital Controller for PV System

  • Kim, Seung-Tak;Bang, Tae-Ho;Lee, Seong-Chan;Park, Jung-Wook
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권5호
    • /
    • pp.1447-1453
    • /
    • 2014
  • This paper proposes the new method based on the availability of three points measurement and convexity of photovoltaic (PV) curve characteristic at the maximum power point (MPP). In general, the MPP tracking (MPPT) function is the important part of all PV systems due to their power-voltage (P-V) characteristics related with weather conditions. Then, the analog-to-digital converter (ADC) and low pass filter (LPF) are required to measure the voltage and current for MPPT by the digital controller, which is used to implement the PV power conditioning system (PCS). The measurement and quantization error due to rounding or truncation in ADC and the delay of LPF might degrade the reliability of MPPT. To overcome this limitation, the proposed method is proposed while improving the performances in both steady-state and dynamic responses based on the detailed investigation of its properties for availability and convexity. The performances of proposed method are evaluated with the several case studies by the PSCAD/EMTDC$^{(R)}$ simulation. Then, the experimental results are given to verify its feasibility in real-time.

RF Band-Pass Sampling Frontend for Multiband Access CR/SDR Receiver

  • Kim, Hyung-Jung;Kim, Jin-Up;Kim, Jae-Hyung;Wang, Hongmei;Lee, In-Sung
    • ETRI Journal
    • /
    • 제32권2호
    • /
    • pp.214-221
    • /
    • 2010
  • Radio frequency (RF) subsampling can be used by radio receivers to directly down-convert and digitize RF signals. A goal of a cognitive radio/software defined ratio (CR/SDR) receiver design is to place the analog-to-digital converter (ADC) as near the antenna as possible. Based on this, a band-pass sampling (BPS) frontend for CR/SDR is proposed and verified. We present a receiver architecture based second-order BPS and signal processing techniques for a digital RF frontend. This paper is focused on the benefits of the second-order BPS architecture in spectrum sensing over a wide frequency band range and in multiband receiving without modification of the RF hardware. Methods to manipulate the spectra are described, and reconstruction filter designs are provided. On the basis of this concept, second-order BPS frontends for CR/SDR systems are designed and verified using a hardware platform.

방향적응적인 연속 비율 실시간 영상 보간 방식 -방향별 가우시안 필터를 사용한 연속 비율 지원 영상 보간 필터- (Real-Time Continuous-Scale Image Interpolation with Directional Smoothing)

  • 유윤종;전신영;비벡 마이크;백준기
    • 한국HCI학회:학술대회논문집
    • /
    • 한국HCI학회 2009년도 학술대회
    • /
    • pp.615-619
    • /
    • 2009
  • 방향 적응적인 저대역 통과 필터를 사용한 보간 방식은 화소의 방향성에 따른 적응적인 필터 처리를 통하여 가로 세로의 비율이 다른 보간을 수행할 시 생기는 영상의 왜곡을 최소화한 방식이다. 본 방식은 하드웨어 적인 구현에 적합하도록 설계되었으며, 영상의 보간 시 사용하는 저대역 통과 필터 처리 강도의 조절이 용이하여 최종 영상의 선명도를 쉽게 변경 할 수 있다는 장점을 가지고 있다. 적은 연산량과 화질의 변경이 용이함으로 인하여, 본 기술은 디지털 카메라, CCTV, 평판 디스플레이 장치 등 영상 보간 기술이 필요한 영상 장비에 적용될 수 있다.

  • PDF

IKONOS 영상에서 도로정보추출을 위한 경계검출에 관한 연구 (A Study on the Edge Detection for Road Information based on the IKONOS)

  • 최현
    • 한국정보통신학회논문지
    • /
    • 제10권3호
    • /
    • pp.593-598
    • /
    • 2006
  • 고해상도위성 영상은 항공사진에 비해서 다중분광특성 뿐만 아니라 광역성에서 많은 장점을 가지고 있다. 그래서 고해상도 인공위성영상은 수치지도를 제작할 때 GIS자료 구축하는데 유용하게 사용될 수 있다. 본 연구에서는 IKONOS 위성 영상에서 자동 검출된 도로정보가 ITS시스템 구축을 위한 자료로 사용되거나 변화가 빈번한 도시지역의 수치 지도 갱신 및 위성 영상지도 제작에 활용될 수 있는 가능성을 분석하였다. 본 연구에서는 저주파 필터링 후 Sobel 연산자가 도로 경계 검출을 위해 적용되었다. 연구결과 고해상도 위성 영상 자료 특성에 따라 도로를 비롯한 구조물 경계를 검출하고자 할 때 저주파 필터링과 고주파 필터링은 ITS구축을 위한 기초자료로 활용이 가능할 것으로 보인다.

블루투스 베이스밴드에 적용 가능한 디지털 로우패스 필터 (A Digital Low-pass Filter appliable for Bluetooth Baseband)

  • 문상국
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2005년도 추계종합학술대회
    • /
    • pp.1000-1002
    • /
    • 2005
  • 최대 7기기까지의 슬레이브 디바이스들과 연결이 가능한 블루투스 피코넷에서, RF 연결단으로 송신되는 무선 데이터는 블루투스 버전 1.1 송신 규약에 적합하도록 1마이크로미터 단위로 슬라이싱되어 베이스밴드 입력단으로 들어오게 된다. 본 연구에서는 상대적으로 불안정한 RF 디바이스에서 베이스밴드로 전달되는 아날로그 신호를 1 마이크로미터 단위의 정확한 슬라이싱을 가능하게 해 주고, 또한 불안정한 아날로그에 대한 신호의 노이즈를 제거할 수 있는 디지털 로우패스 필터를 설계하였다. 설계된 디지털 로우패스필터는 블루투스 RF 일체형 베이스밴드 침의 절전 모드, 정상동작 모드와 고속 동작 모드인 12MHz, 24MHz, 48MHz 각 주파수에서 모두 정상적으로 동작하였다.

  • PDF

X-선 필름 영상의 개선 및 경계 검출 (Image Enhancement and Edge Detection of X-Ray Radiographs)

  • 김형정;유희삼;구용회;강준길
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
    • /
    • pp.1405-1408
    • /
    • 1987
  • X-ray filmed data converted by Image digitizer were processed through the digital computer for edge detections. Sobel operator with the high-pass and the low-pass filtering of the histogram of the images were applied to this work and 3 examples were processed.

  • PDF

상보형 패스 트랜지스터를 이용한 저전력, 고속력 Delay Locked-Loop 설계 (Low-power, fast-locking All Digital Delay Locked-loop Using Complementary Pass-Transistor Logic)

  • 장홍석;정대영;신경민;정강민
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
    • /
    • pp.91-94
    • /
    • 2000
  • This paper introduces the design of low-power, fast-locking delay locked-loop using complementary pass transistor logic(CPL). Low-power design has become one of the most important in the modem VLSI application. CPL has the advantage of fast speed, high density, and low power with signal buffering between stages. Based on this analysis, we concluded that the I/O performance can be beyond 500㎒, 2-poly, 2-metal 0.65$\mu\textrm{m}$, 3.3V supply.

  • PDF