• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.517-518
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.221-222
• /
• 2007

• Korean Journal of Optics and Photonics
• /
• v.30 no.6
• /
• pp.230-236
• /
• 2019

We propose and demonstrate a searching and autoalignment method for indoor optical wireless communication, using a cost-effective retroreflective sheet and a microelectromechanical system (MEMS) mirror. We use an extremum-seeking method for a single axis and beam steering with a MEMS mirror to maintain a line of sight (LOS) with the optical link. This autoalignment method shows a receiver sensitivity of -31.87 dBm for a bit rate of 2.5 Gb/s over a 7 m communication link.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.995-998
• /
• 2005

This paper proposes a new SoC (System-on-Chip)-based automatic compensation circuit (ACC) for 5GHz low noise amplifier (LNA). This circuit is extremely useful for today's RF IC (Radio Frequency Integrated Circuit) devices in a complete RF transceiver environment. The circuit contains RF BIST (Built-ln Self-Test) circuit, Capacitor Mirror Banks (CMB) and digital processing unit (DPU). The ACC automatically adjusts performance of 5GHz LNA by the processor in the SoC transceiver when the LNA goes out of the normal range of operation.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.02a
• /
• pp.135-136
• /
• 2006

We present a new binary data encryption and transmission technique based on 4-step phase-shifting interferometry for a security system. Phase-shifting interferometry is used for recording phase and amplitude information on CCD device. 4-step phase-shifting is implemented by moving the PZT mirror with equidistant phase steps of ${\pi}/2$. The basic idea is that we reuse a 256 gray-level digital hologram to encrypt binary data with 4-step phase-shifting interferometry.

• ETRI Journal
• /
• v.41 no.1
• /
• pp.32-41
• /
• 2019

We propose a speckle reduction technique in electronic holographic display systems, where digital micro-mirror array devices are used as spatial light modulators. By adopting a programmable filtration in a general 4-f optic configuration, it is shown that the signal spectrum components in the frequency domain of a viewing-window-based holographic display system can be selectively filtered. Compared to the widely utilized single-sideband filtration techniques in electronic holographic display systems, our proposed programmable filtration can be utilized to effectively reduce the speckles in the reconstruction of point-cloud-based computer-generated holograms. Experimental results are presented to verify our proposed concept.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.1250-1254
• /
• 1992

This paper describes the designed and fabricated thermal imaging system with the SPRITE(Signal PRocessing in The Element) detector, operating in the 3-12 micron band. This system consists of an afocal telescope, a scan unit containing the SPRITE detector, an electronic processor unit and a cooler. The optical scan system utilizing rotating polygon and oscillating mirror, is 2-dimensional serial/parallel scan type using five elements of the detector. And the electronic processor unit performs digital scan conversion to reform the parallel data stream into serial analog data compatable with conventional RS-170 video. The scan field of view is 40 ${\times}$ 26.7 and the MRTD(Minium Resolvable Temperature Difference) is 0.6 K at 7.5 cycles/mm. The acquired thermal image indicates that this system has a satisfactory performance.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.3
• /
• pp.18-21
• /
• 2021

This paper analyzes the distortion correction of the in the micro DMD(digital micro mirror device) projector system using 0.25 or less optical throwing distance ratio. The distortion of projected image occurs depending on the performance of the optical lens, the installation location of the projection system, and the tilt of the screen. This study analyzed the physical tilt values influencing of the distortion of projected image, removed the tilt distortion of throwing distance ratio optical lens, and adjusted the distortion image by the simulation of calibration displacements. The results of this study demonstrated within 5% TV distortion reference. Moreover, the correction method reduced the pin-distortion correction of projection system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.663-664
• /
• 2018

The car design has changed a lot over the past 100 years, but the side mirrors have not changed. It is not right in the fourth round of the Industrial Revolution. It is also an analog format, which has many disadvantages. Accordingly, by replacing the side mirror to the camera to change the digital it was improve the limitations and disadvantages of the 'mirror' with. It also has additional benefits such as fuel savings of 5 to 10 percent per year and automatic detection of threats. In this project, we used Razberry pie, which is highly compatible, as a main board, and connected infrared distance sensor and monitor module to focus on automatic threat detection.

• Journal of Korea Game Society
• /
• v.11 no.2
• /
• pp.29-37
• /
• 2011

As a field in Digital Arts, interactive video introduced the mirror metaphor to the foundation of media, given its characteristic as a medium that extracts an audience image in a particular perspective. The interactive video work introduced in this paper addresses conceptual topics in the extension of Zhuangzi's Butterfly Dream and illustrates the technological approaches that employ an intensity-based computer vision processing in order to obtain the silhouette of audience for multiple graphical butterflies to draw an audience image. Users generate narratives in the interaction with the projected image. Sound is used in order for the system to provide augmented perception in the space and to add more rooms for narratives. The computer vision and the graphics methods introduced in this paper are suggested as tools for interactive video.