• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.2
• /
• pp.99-104
• /
• 2019

Recently, modern people are increasing the incidence of various musculoskeletal diseases due to wrong posture. Prevention is possible through proper posture habit, but it is not easy to recognize posture by oneself. Various studies have been conducted to monitor persistent posture in daily life, but most studies using constrained measurement methods and high-cost measurement equipment are not suitable for daily life. In this paper, we implemented a posture discrimination system using a FSR sensor array that can induce posture correction spontaneously through sitting posture monitoring in daily life. The implemented system is designed as a cushion type so it is easy to apply to existing chair. In addition, it can identify five most common postures in everyday life, and can monitor real-time through Android-based smart-phone monitoring application. For the performance evaluation of the implemented system, each posture was measured 50 times repeatedly. As a result, 97.6% accuracy was confirmed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.147-151
• /
• 2017

Areas of concentrations that can be exploited at all times, such as gas reservoirs in crude oil tanks, are called zero zones. In order to use various equipment in Zone 0, an intrinsically safe certification must be obtained that can guarantee that sparks will not occur in nature. Most devices that acquire intrinsic safety certification are mostly simple single-component devices or devices. In this study, it was a very difficult process because we intend to acquire the intrinsic safety certification of an electronic circuit including an ultrasonic generator and a microcontroller in which hundreds of components are mounted on a PCB substrate. Through this study, we have been able to understand how to design a circuit for intricate intrinsic safety certification. and Using the results of this study, it will be easier to design intrinsically safe circuits when trying to develop a circuit that can obtain intrinsic safety certification.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.15-28
• /
• 2007

It is safe to say that color is among the most important elements in design. Thus, most designers give much thought about color while finishing their works. However, it is not easy to use the color interface of computer graphics programs, which makes it difficult for designers to apply the color theory and color scheme theory they've learned at school into the real design works. In fact, the same color systems as those of Adobe's first version of Photoshop or other illustration programs are still being used. Despite the advancement of digital equipment and development of printing technology, color palettes haven't changed accordingly, making it difficult to find a proper color coordination. Based on surveys and color scheme theories and taking designers' convenience into consideration, I will suggest in this paper a new color interface with which the color system and color scheme theories can be easily applied. However, its use in reality is not dealth with in this paper since it requires more practical discussions and studies.

• Archives of design research
• /
• v.17 no.2
• /
• pp.393-402
• /
• 2004

The mobile advertisement has varied on lifestyle of people, who live aninformation-oriented society with portable equipment such as web phone and PDA(Personal Digital Assistant). Also, the advertising has expended mobile techniques and its application field unpredictably. The intrinsic characteristic of misdistribution, reach, and convenience in mobile advertisement add up the capacity of a location, information and individualize. This market condition leads the basic audio focused formal mobile advertisement to the new mobile Internet environment with an additional able of data communication. Moreover, the type of SMS (Short Message Service), Graphic, Wep Push, and ridchmedia, which based on music, basic graphic, voice, and letters transfer by mobile terminal and the mobile character is present inevitably correlation with pixel art and animation in 2D(Two Dimensions) techniques. Thus, this research appoints the importance and its role of mobile advertisement that is core of the business marketing in new media era. To activate mobile market, the mobile companies classify the characteristic of consumers with developed commercial use of mobile character and research their behavior to meet optimal mobile character in business.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.175-184
• /
• 2016

In this paper, we propose the method to measure the capacitances using not LCR meter but capacitance to voltage(C/V) conversion. And we design the analog MUX circuits that convert 192 channels to 6 MUX channels in order to implement the diagnosis of multi-channel ultrasonic probe. This paper derives the conversion function that converts the digital voltage of each MUX channel to the capacitance using the least squares method because the circuit characteristics that convert the voltage of each MUX channel to the capacitance are different. The developed prototype illustrates the performance test results that the measure times are measured by within 4sec and the measure error rates of maximum, minimum, and average values are within 5% in terms of the repeated measurements of all 192 channels.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.77-82
• /
• 2010

This study evaluated the characteristics and reliability of an auger crane with a built-in hydraulic extender. The field test of the hydraulic extender was performed with the hydraulic lines filled with hydraulic fluid and free of air. The pressure generated during the test was measured with a digital pressure gauge. The crane was considered to have undergone one cycle of the excavation process after it had performed excavation under three conditions at the same location. This process was performed three times in total. From the results of the excavation using the hydraulic extender, it was found that the maximum pressure and torque measured were 19.9 [MPa] and 895.4 [$kgf{\cdot}m$], respectively. The rotation force of the auger crane generated at this time signifies a horizontal force. If the excavation diameter of the auger crane is increased, the rotation speed is reduced causing the circumferential speed to also be reduced. The torsional shear stress of the extendable auger crane was calculated to be approximately 23.5 [MPa]. However, the rotation shaft material used for this system was carbon steel for machine structural use (SM45C). Since the minimum torsional yield stress is greater than 150 [MPa] according to KS D 3752, it means the equipment has secured a safety factor greater than 6. Therefore, it was found that when performing work using the extendable auger crane, it exhibited no problems with the safety and reliability of its shaft.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.211-218
• /
• 2005

As digital Information equipment is new arrival, new paradigm such as 'function exist but form don't' is needed in the field of design. Therefore, the activity of design is focused on the relationship of human and machine against visual form. For that reason, it is involved emotional factor in the relationship and studied on new field, the emotional interlace. The goal of this paper is to suggest the way of emotional interface on searching multimedia data. The main target of paper is effect sound and human's step and the main way of research is visualization after measuring and analyzing numerically similarity level among emotion-words. This paper suggests the theoretical bad(ground such as personal opinion, the character of auditory information and human's step and case studies on the emotion research. The experimental content about sound is fueled from my previous research and the main experimental content about human's step is made with regression-expression to substitute Quantification method 1 for value about stimulation. The realistic prototype to apply the research result will is suggested on the next research after studying the search environment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.8
• /
• pp.30-35
• /
• 2006

Voltage is generally and exactly measured in the electric and electronic field. So, we studied method for detecting electric equipment faulty state using only electric voltage. It is called the Partition-FFT. Tracking is simulated by method and tester proceed on IEC 60112. We analyze voltage waveforms by tracking tester with Partition-FFT. As the result tracking process is clearly distinguished by 6 steps. Tracking is one of the major reason of electric accidents. The Partition-FFT is using a digital oscilloscope and a computer software. If Partition-FFT analysis is applied to the electricity facilities, We can prevent from happenning electric accidents cause of tacking breakdown with low prices and easy measurment. Most of all, Partition-FFT is system that make a visual tacking process. So, everyone is able to detect to possibility of electric accidents.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.113-118
• /
• 2017

As interest in mobile devices and networks has increased recently, voice over internet protocol (VoIP) service, which is a technology for transmitting voice data using an existing internet protocol (IP) network, has rapidly spread, Cheap voice call service has become possible. As the digital broadcasting service becomes popular, hybrid fiber coaxial (HFC) network technology, which uses broadband cable network through fusion of broadcasting and communication, utilizes existing communication system and network equipment to provide various new services such as interactive broadcasting service. Therefore, if UGS-AD is applied to VoCM and RTPS is applied to MTA in order to guarantee the quality of voice data in actual HFC Internet service network, it is possible to smoothly perform voice data transmission in narrow upstream band which is a problem in actual commercial HFC network We also proposed a method to improve VoIP service by improving QoS of voice data in HFC Internet service network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.11
• /
• pp.2145-2152
• /
• 2017

As the ubiquitous paradigm that allows users to access the Internet anytime and anywhere is expanding, the expectation and interest of the Internet is increasing. As interest in the Internet has increased, interest in open source hardware has also increased. As a result, the maker, who is a creator who actually uses the digital production tools to create a product that he thought, is emerging as a new trend. As these makers shared how to make products, the 'maker movement', an open source manufacturing movement, spread. In the case of the domestic market, the government's policy support is also stimulating the maker movement. However, compared to developed countries, there is not enough awareness and environment of maker culture, and only open platform hardware and software are used without special education / development equipment or kit for maker.