• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.378-386
• /
• 2017

A return-to-zero (RZ) digital-to-analog converter (DAC) with a tri-state switching scheme is proposed in this paper. The proposed scheme provides a triple weight output for RZ operation by using a conventional differential current switch and simple pseudo-differential F/Fs. The RZ function is realized with only two additional transistors in each F/F cell, which results in a power dissipation increase of less than 5%. To verify the performance of the proposed method, a 10-bit RZ DAC is fabricated using standard 180-nm CMOS technology. Measured results show that the worst SFDR performances are 60 dBc and 55 dBc in the 1st and 2nd Nyquist bands, respectively, when operating at 650 MHz clock frequency. The total power consumption is 64 mW, and the active area occupies $0.25mm^2$.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.252-254
• /
• 2006

The recent improvement in the performance of digital processor, the application of control technology, which used in the HVDC(High Voltage Direct Current) system with the digital processors, has increased. Having this research development as the basis, this paper presents an achievement of progression by tuning the parameter of PI controller based on Genetic Algorithms(GAs) and by controlling with PI controller with a developed simulator by applying the Matrix operating function, voltage source switching element, modified nodal analysis which can include transformer and the backward Euler which does not create the problem of numerical oscillation. As a result, I expect this development in the simulator HVDC System to bring more application in the field of control technology research with an expanded practicality.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.461-463
• /
• 2018

In this paper, we have studied the devices needed for long distance wireless transmission of SDH network. This devices propose wireless transmission and measurement method of STM-1(basic transmission unit of SDH method) signal and 200Mbps synchronous ethernet. The synchronous clock recovery function is provided for STM-N transmission and synchronous ethernet transmission, and spare clock switching function is designed for stable synchronization. In addition, we discussed the measurement method of STM-N and synchronous Etherent communication method in wireless transmission section.

• Journal of Advanced Engineering and Technology
• /
• v.5 no.4
• /
• pp.349-353
• /
• 2012

Recently, Mobile multimedia equipments as smart phone and tablet pc requirement is increasing and this market is also being expanded. These mobile equipments require large multi-media function, so more power consumption is required. For these reasons, the needs of power management IC as switching type dc-dc converter and linear regulator have increased. DC-DC buck converter become more important in power management IC because the operating voltage of VLSI system is very low comparing to lithium-ion battery voltage. There are many people to be concerned about digital DC-DC converter without using external passive device recently. Digital controlled DC-DC converter is essential in mobile application to various external circumstance. This paper proposes the DC-DC Buck Converter using the AVR RISC 8-bit micro-processor control. The designed converter receives the input DC 18-30 [V] and the output voltage of DC-DC Converter changes by the feedback circuit using the A/D conversion function. Duty ratio is adjusted to maintain a constant output voltage 12 [V]. Proposed converter using the micro-processor control was compared to a typical boost converter. As a result, the current loss in the proposed converter was reduced about 10.7%. Input voltage and output voltage can be displayed on the LCD display to see the status of the operation.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.57-61
• /
• 2006

As high speed internet users are tremendously increasing, three are keenly in need of development of high speed portable internet technology which can provide high quality wireless internet service cheaply even in the mobile. Unlike the FDD-CDMA, TDD-OFDMA has relatively poor wave environment with inducing interference, fading and delay because it agrees to multi-carrier modulation method and time-division radio telecommunication system. To solve this problem, it is necessary to develop repeater operating by digital signal processing method which have more strict wireless channel control and wave signal processing technology over TDD telecommunication equipments. This thesis is dealing with design and implementation of Digital RF Repeater which implemented 'Synchronization Acquisition Unit', 'TDD signal switching Unit', 'Feedback Signal Cancellation Unit'. Over this argument, we will develop digital RF repeater with more cheap, more adaptive in wave environment like oscillation control, adaptive wave monitoring and output increasing and having control function as a result it will be helpful for success in high speed portable internet service business.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1028-1031
• /
• 2003

The implementation of PI controller with the FPGA is for controlling the speed of DC motor in the digital system. FPGA is assigned to 1. Outer speed control loop. The signal from the speed comparison will be in the PI controlling form transfer function of Direct Form I or PI Parallel Form. 2.Inner current control loop. The signal from the current comparison will be converted into switching function in sliding mode condition. Its output will be a controller of DC motor in the next step. The result from using FPGA will be close to the value of simulation in the analog control system. The sampling rate 40 kHz and 16 bit of 2's complement data are defined in this presentation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1562-1574
• /
• 1998

We, in this paper, have implemented T1, E1 and fractional E1 HDSL(High-bit-rate digital subscriber line) function over an ATM switching system. The maxi$\mu$ loop lengths for subscriber service and cell loss rates to meet the bit error rate of 10$^{-7}$ at transmission of 2B1Q HDSL data E1 rate over existing telephone copper wires in the presence of the significant impairments such as NEXT(Nearned crosstalk), impulse noise, power line noise and longitudinal over the CSAs environment consisting of 26 gauge and 25 gauge unloaded copper telephone lines has assessed. HDSL will intially be used to serve private-DS1, ISDN-BRA, and DLC feeders, later DS1 extension from optic fiber cable. We also present market provision for the HDSL.

• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.492-499
• /
• 1997

We proposed and studied an all-optical switching device made of a bent nonlinear waveguide and an all-optical logic gate made of a bent nonlinear Y-junction. The proposed devices as switch and a logic function are based on the evolution of nonlinear guided wave along a bent nonlinear waveguide. Since the characteristics of beam propagation depens on the nonlinearity, input power and bent angle of waveguide, the characteristics of output power transmission is calculated by variation the such parameters. Furthermore, by calculating the output power through the nonlinear media with different positions of detector in nonlinear media, we could find the ideal digital switching performance at specific position of detector and implement several all-optical logic functions (AND, OR, XOR) by power contrast between waveguide end and nonlinear media.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.351-358
• /
• 2012

This study is aimed at suggesting optical communication equipment that can deliver high quality video information in high speed, to efficiently handle the flood and water pollution in the river basin. This system is cheaper than existing equipment, and can monitor optical Internet as well as the condition of equipment. Generally, the communication equipment to prevent flood is installed in an unmanned control box and operated by the flood control office situated at the fiver mouth in a long distance section. Therefore, it is hard to promptly cope with communication interruptions, which occur by the cutting or aging of the optical cable. Under the circumstances, this study suggested an efficient system that can deliver high quality video information in high speed (Optical Transmission Convert System) by using optical fiber. The system also solves problems by making use of automatic protection switching (APS) when an accident happens. Its real-time monitoring function gives notice of the problem-occurring points. The system is expected to be widely used in various areas such as intelligent traffic systems.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.190-201
• /
• 2015

This paper uses the switching function approach to present a simple state model of the Vienna-type rectifier. The approach introduces the relationship between the DC-link neutral point voltage and the AC side phase currents. A novel direct power control (DPC) strategy, which is based on the sliding mode control (SMC) for Vienna I rectifiers, is developed using the proposed power model in the stationary ${\alpha}-{\beta}$ reference frames. The SMC-based DPC methodology directly regulates instantaneous active and reactive powers without transforming to a synchronous rotating coordinate reference frame or a tracking phase angle of grid voltage. Moreover, the required rectifier control voltages are directly calculated by utilizing the non-linear SMC scheme. Theoretically, active and reactive power flows are controlled without ripple or cross coupling. Furthermore, the fixed-switching frequency is obtained by employing the simplified space vector modulation (SVM). SVM solves the complicated designing problem of the AC harmonic filter. The simplified SVM is based on the simplification of the space vector diagram of a three-level converter into that of a two-level converter. The dwelling time calculation and switching sequence selection are easily implemented like those in the conventional two-level rectifier. Replacing the current control loops with power control loops simplifies the system design and enhances the transient performance. The simulation models in MATLAB/Simulink and the digital signal processor-controlled 1.5 kW Vienna-type rectifier are used to verify the fast responses and robustness of the proposed control scheme.