• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.954-957
• /
• 1987

This paper proposes a kind of function-concentrated signaling service equipment structure, in which various kind of signaling service are efficiently made for call processing control. Based upon the typical switching system models, a philosophical study on the capacity, features of structure in world systems, and interfaces with peripheral equipments has been performed in order to provide the rationale on the merits or efficiency of the proposed digital signaling service equipment.

• 전기학회논문지
• /
• 제65권6호
• /
• pp.1089-1094
• /
• 2016

In order to establish the robust controller design technique of series wound motor driver system. This paper proposes a method of Bang-Bang controller using a series wound motor driver system under improperly variable load. A Bang-Bang controller structure is simpler than the structure of PID plus Bang-Bang controller. This paper shows that a general 8 bits microprocessor is used efficiently implementing such an algorithm. The calculation time of software is extremely small when compared with conventional PID plus Bang-Bang controller. Both nonlinear operating characteristics of digital switching elements and describing function methods are used for the analysis and synthesis. Real time implementation of Bang-Bang controller is achieved. Concept design strategy of the control and PWM waveform generation algorithms are presented in the paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.148-150
• /
• 1988

The output characteristics of VSI by transistor depend upon bias signal with drive circuit. As the CTI is one of the VSI, takes case PWM output voltage. This Inverter operation is based upon position and negative of sinusoldal PWM signal by carrier triangular wave and compared sine one. Besides, the Inverter operation system required digital signal for microprocessor, sampling method of Inverter driver signals study for get rid of generated signal is error. In the paper, the method of 3 level PWM signal for CTI was studied. This method of signals depend upon caculated switching position of natural sampling with $10^{-6}$ modulation error for time flowchart programs.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.321-322
• /
• 2014

In this paper, a zero-voltage switching (ZVS) phase shift full-bridge converter is analyzed. The small-signal model is derived to design a digital controller. PLECS simulation shows how sampling method effects on transfer function of ZVS phase shift full-bridge converter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.441-442
• /
• 2015

This paper proposes a new single-phase seven-level grid-connected inverter. Operational principle with switching function are analyzed. A digital proportional-integral current-control algorithm was implemented in a TMS320F28335 DSP to keep the current injected into the grid sinusoidal. To verify the performance of the proposed inverter, PSIM simulation and experimental results are also shown in this paper.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.470-471
• /
• 2018

본 논문에서는 최근에 디지털논리시스템의 회로 구현시에 적용되기 시작한 분할설계기법의 한가지 방법을 제안하였다. 기존의 디지털논리회로설계기법은 적용되는 개별소자를 어떻게 효과적이며 효율적으로 이용하느냐 하는 것이 큰 목적이었으나, 최근의 전자공학의 발달과 회로의 집적도가 높아짐에 따라서 디지털논리설계기법은 각각의 모듈을 구성하고 있는 소자들의 개별소자를 사용하는 것보다는 복잡하더라도 좀 더 경제적이고 다기능의 분할설계기법이 요구되고 있다. 이러한 내용을 근간으로 본 논문에서는 효과적인 분할기법을 이용한 스위칭함수구성의 한가지 방법을 제안하였다.

• Journal of Information Display
• /
• 제8권1호
• /
• pp.22-25
• /
• 2007

Stereoscopic/autostereoscopic systems have been developed to express 3D images, but have not been successfully use in practise. In order to apply 3D display to promising applications such as advertisements and games, we developed a 42" 2D/3D switchable display. It has characteristics that do not require special glasses for 3D images, uses multi-view technology for improving 3D viewing characteristics, and has a 2D/3D switching function to express dynamic 3D contents as well as conventional 2D contents.

• 한국정보통신학회논문지
• /
• 제9권8호
• /
• pp.1774-1779
• /
• 2005

본 논문에서는 그래프 이론에 기초를 둔 GFDD를 사용하여 디지털논리시스템을 구성하는 한가지 방법을 제안하였다. 제안한 방법은 먼저 유한체와 그래프 이론의 수학적 성질을 논의하였으며, 단일변수에 대한 동작영역과 함수영역간의 변환을 용이하게 하기 위한 변환행렬 $\psi$GF(P)(1)과 $\xi$GF(P)(1)을 논의하였다. 그리고 디지털스위칭함수를 구하기 위한 Reed-Muller 확장을 논의하였으며, 이를 다변수인 경우로 확장하기 위해 Kronecker Product를 논의하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1984-1987
• /
• 2002

This paper describes the design and implementation of a single-chip digitally synthesized 0-35MHz agile function generator. The chip comprises an integrated direct digital synthesizer (DDS) with a 10-bit on- chip digital-to-analog converter (DAC) using an n-well single-poly triple-metal 0.5-$\mu\textrm{m}$ CMOS technology. The main features of the chip include maximum clock frequency of 100 MHz at 3.3-V supply voltage, 32-bit frequency tuning word resolution, 12-bit phase tuning word resolution, and an on-chip 10-bit DAC. The chip provides sinusoidal, ramp, saw-tooth, and random waveforms with phase and frequency modulation, and power-down function. At 100-MHz clock frequency, the chip covers a bandwidth from dc to 35 MHz in 0.0233-Hz frequency steps with 190-ns frequency switching speed. The complete chip occupies 12-mm$^2$die area and dissipates 0.4 W at 100-MHz clock frequency.

• 대한전기학회논문지
• /
• 제35권5호
• /
• pp.185-192
• /
• 1986

This paper deals with the general mathmatical model of the CSI-fed induction motor system. The inverter is represented by a switching function matrix which is combined with the dg model of an induction motor. Complete system model is given by a set of differential equations in a closed form, which inherently includes the harmonic effects of the converter and the inverter. The model is valid in evaluating both the transient and steady state responses, while the more simple analytical model can be derived from the general model, in a steady state. With the model proposed, the digital simulation is carried out on a 10KVA CSI-induction motor system and the simulation results show good agreements with experimental ones.