• Journal of Electrochemical Science and Technology
• /
• v.11 no.2
• /
• pp.180-186
• /
• 2020

In this work, a metal-ligand solution (Cu-EDTA) was prepared based on the molecular precursor method and the solution was spin-coated onto 3D printed flexible photosensitive resin sheets. After being processed by microwave, a laser with a wavelength of 355 nm was utilized to scan the spin-coated sheets and then the sheets were immersed in an electroless copper plating solution to deposit copper wires. With the help of microwave processing, the adhesion between copper wires and substrate was improved which should result from the increase of roughness, decrease of contact angle and the consistent orientation of coated film according to the results of 3D profilometer and SEM. XPS results showed that copper seeds formed after laser scanning. Using the 3D printed flexible sheets as cathode and galvanized iron as anode, electrochemical machining was conducted.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.31 no.1
• /
• pp.51-64
• /
• 2013

When it comes to current growth trend for the printing process in Asia printing market, offset printing, gravure printing and screen printing are reduced respectively -4%, -19%, -55%. In judging from the fact, the change in the printing production system from mass production on small amount to small production on mass amount is the biggest issue. For this reason, digital printing shows the significant growth. According to the increase of the growth 78% for electro photography way and 67% for ink-jet, it's not enough to catch up with digital printing which is increasing as time goes by to equip with hardware like as digital press. There's been necessary to install the BOD(Book on Demand) system which is the advanced and regular publication edit solution based on web-to-print model in the prepress, and it has made the BOD system be considered in relation to maximization of efficiency and production. Therefore, this research tries to step forward from the POD concept, which is refired to "Print along with the ordered quantities, the ordered appropriate time and the demanded place", so that it could expand the range of the printing/publishing environment using the BOD system, the order-made publication based on automatically operating template. And it tried to make the relation to digital web press on ink-jet method which is adequate to "mass production on small amount" with such advanced concept. This research also aims to use actively BOD solution model to promote the productivity of labor, and then to produce the printings across all related industries, which means to manufacture maximally the products on the shortest time at minimum place through PC equipments.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.387-390
• /
• 2006

The protective layer of AC-PDP was fabricated by laminating an MgO green sheet. The MgO green sheet was made by coating MgO solution composed of solvent, dispersant, binder, and MgO nano-powder. The MgO solution was coated by the die casting method on the base film. We fabricated three kinds of MgO green sheets of which thicknesses were 20, 28, and $40\;{\mu}m$, respectively. The MgO nano-powder showed lower CL intensity and ${\gamma}i$ than the e-beam MgO. The MgO green sheet applied panels showed low luminance and current density. The efficiency was almost same as the conventional e-beam MgO panel.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.276-278
• /
• 2006

In this paper, a complete solution to fuzzy-model-based digital redesign problem (IDR) for sampled-data nonlinear systems is presented, The term of intelligent digital redesign (IDR) is to design a digital fuzzy controller such that the sampled-data closed-loop fuzzy system is equivalent to the continuous-time closed-loop fuzzy system using the state matching, Its solution is simply obtained by linear transformation, Under the proposed sampled-data controller, the states of the sampled-data and continuous-time fuzzy system are completely matched at every sampling points.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.245-248
• /
• 2004

본 논문에서는 텔레비전 수신기에서 채널 변경에 따른 음량 자동 보정 방법에 대해서 기술하고자 한다. 지금까지 텔레비전 수상기에서는 사용자가 방송 채널을 전환하는 경우 각 방송 채널마다 음량 레벨이 조금씩 다르다는 것을 느끼게 된다. 그러므로 이러한 채널 변경에 따른 음량 변화를 조정하기 위해 청취자가 리모컨으로 볼률을 조절하는 불편함을 줄이기 위해 자동으로 음량 변화를 보정하는 것이 요구된다. 본 논문은 채널 변경에 따른 음량 변화와 Dynamic Range 가 너무 큰 오디오 신호에 대해 자동으로 음량을 보정함으로써 청취자가 볼륨을 조절하는 불편함을 줄이는 자동 음량 보정 알고리즘을 제안하였다.

• 전기의세계
• /
• v.23 no.1
• /
• pp.61-68
• /
• 1974

This paper attempts to develop the algorithms and computer program for load flow solution and faults analysis of large power system by small digital computer. The Conventional methods for load flow solution and fault analysis of large power system require too much amount of computer memory space and computing time. Therefore, this paper describes the methad for reducing the computer memory space and computing time as follows. (1) Load Flow Solution; This method is to store each primitive impedance of lines along with a list of bus numbers corresponding to the both terminals of lines, and to store only nonzero element of bus admittance matrix. (2) Faults Analysis: This method is to partition a large power system into several groups of subsystems, form individual bus impedance matrix, store them in the storage, and assemble the only required portion of them to original total system by algorithm.

• Journal of Korea Multimedia Society
• /
• v.7 no.11
• /
• pp.1564-1570
• /
• 2004

Recently, The Analog TV has been being replaced by digital TV. This dues to the advantage of digital TV that sends data as well as audio/video stream to the receiver. But there are no standards or rules for processing the data. So, most companies or developers process the data in separate methods. This absence of standards or rules for processing the data causes many confusions and waste of time, money, man power. This Thesis proposes the solution of the problem not based on standardized respect but methodological respect. This solution is using XML in producing and playing the broadcasted multimedia contents and data. We believe that this solution saves much man power, time, money and increase reusability of expensive broadcasting contents.

• Journal of Digital Contents Society
• /
• v.11 no.3
• /
• pp.299-306
• /
• 2010

According to development of Internet and computer graphics technology, Digital fashion technology makes virtual fitting service capable by reappearing of clothes in 3D. In this paper, We suggest that combined solution which you could use virtual fitting service with various device. For example, imaginary mirror(such as digital information display), pc, mobile in different situations such as store, internet shopping market, commercial. Users can experience imaginary mirror that is located in store or 3D virtual fitting service for digital fashion in internet shopping market, mobile application. In addition, We proposed the solution that user can send experienced virtual fitting service results to other person by image file form of MMS.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.452-466
• /
• 2004

As the number of broadcasting channels and programs increases rapidly, the importance of personalized service has been emphasized. In this paper, we propose a practical framework of metadata broadcasting to provide personalized service according to user preferences and various terminal/network conditions. First, we present an overall system architecture of a metadata broadcasting system and then propose several core technologies (particularly in the parts of metadata authoring, metadata encoding, and metadata-based personalized content consumption). For interoperability, the proposed solution is designed to be compliant with the relevant standards of the TV-Anytime Forum, MPEG-7 Systems, and MPEG-2 Systems. Considering a home network environment, we also propose a metadata-based content adaptation scheme. Each component technology has been implemented individually, integrated into an end-to-end prototype broadcasting system, and successfully tested with a set of personalized service scenarios that are also developed in this study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.520-522
• /
• 2022

Lone Death is increasing as elderly population increases. Lone elderly is vulnerable in society for many reasons. This paper explores digital solution to protect solitary in society. First, sensor and AI care robot can be used to collect digital data and situation check. Second, digital device is checked regularly and visiting is expanded in digital environment. Third, digital emergency security system should be established. Fourth, user education is to be regularly carried out including complementary education.