• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1169-1170
• /
• 2008

The paper is represented active robot soccer system using humanoid. many robot we implement the control method of several robot and the algorithm of robot soccer system.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1173-1174
• /
• 2008

In this paper, we propose a front-mounted single camera based depth estimation and robot localization method. The advantage of front-mounted camera is reduction of redundancy when the robot move. The robot computes depth information of captured image, moving around. And the robot location is corrected by depth information.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.155-156
• /
• 2022

In the process of developing an industrial robot, various simulations should be conducted to evaluate the driving, movement, and performance of the robot. Space and time constraints exist to manufacture existing robots and implement various simulations, and efficiency is reduced due to high costs. To solve this problem, many simulations can be conducted by implementing the same movement and working environment as the real environment in virtual reality using digital twin technology. This study proposes a process for establishing a digital twin model of automated layout robots. Using the digital twin model, it is expected that it will not only evaluate the hardware performance of the robot in the future, but also verify the robot's algorithms such as motion planning and work process, identify and solve potential problems in advance, and prevent problems caused by software.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.3
• /
• pp.39-45
• /
• 2009

In this paper we present a cleaning robot system for an autonomous mobile robot. Our robot performs goal reaching tasks into unknown indoor environments by using sensor fusion. The robot's operation objective is to clean floor or any other applicable surface and to build a map of the surrounding environment for some further purpose such as finding the shortest path available. Using its cleaning robot system for an autonomous mobile robot can move in various modes and perform dexterous tasks. Performance of the cleaning robot system is better than a fixed base redundant robot in avoiding singularity and obstacle. Sensor fusion using the clean robot improves the performance of the robot with redundant freedom in workspace and Map-Building. In this paper, Map-building of the cleaning robot has been studied using sensor fusion. A sequence of this alternating task execution scheme enables the clean robot to execute various tasks efficiently. The proposed algorithm is experimentally verified and discussed with a cleaning robot, KCCR.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.506-510
• /
• 2007

Digital Magnetic Compass(DMC) has a robust feature against interference in the indoor environment better than compass which is easily disturbed by electromagnetic sources or large ferromagnetic structures. Ultrasonic Sensors are cheap and can give relatively accurate range readings. So they ate used in Simultaneous Localization and Mapping(SLAM). In this paper, we study the Simultaneous Localization and Mapping(SLAM) of mobile robot in the indoor environment with Digital Magnetic Compass and Ultrasonic Sensors. Autonomous mobile robot is aware of robot's moving direction and position by the restricted data. Also robot must localize as quickly as possible. And in the moving of the mobile robot, the mobile robot must acquire a map of its environment. As application for the Simultaneous Localization and Mapping(SLAM) on the autonomous mobile robot system, robot can find the localization and the mapping and can solve the Kid Napping situation for itself. Especially, in the Kid Napping situation, autonomous mobile robot use Ultrasonic sensors and Digital Magnetic Compass(DMC)'s data for moving. The robot is aware of accurate location By using Digital Magnetic Compass(DMC).

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.231-236
• /
• 1997

We propose the hybrid control for the path control of wheeled mobile robot system. To develop the hybrid control of mobile robot, the continuous dynamics of mobile robot are modeled by the switched systems. The abstract model and digital automata for the path control are developed. This hybrid control system has the 3-layered hierachical structure : digital automata as the higher process, mobile robot system as the lower process, and the interface as the interaction process between the continuous dynamics and the discrete dynamics. The control of following the desired-paths with edges are investigated as the applications by the computer simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.503-506
• /
• 1996

An integrated Robot control system for SCARA robot is developed. The system consists of an off-line programming(OLP), software and a robot controller using four digital signal processor(TMS32OC50). The OLP has functions of teaching task, dynamic simulator, three dimensional animation, and trajectory planning. To develop robust dynamic control algorithm, a new sliding mode control algorithm for the robot is proposed. The trajectory tracking performance of these algorithm is evaluated by implementing to SCARA robot(SM5 type) using DSP controller which has conventional PI-FF control algorithm. To make SCARA robot operate according to off-line teaching, an interface between OLP and robot controller in the integrated system is designed. To demonstrate performance of the integrated system, the proposed control algorithm is applied to the system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.1
• /
• pp.73-78
• /
• 2013

In this paper, configuration control for the Horizontal Maintenance of the 2 wheel robot has been studied using ARS(Attitude Refrence System). The 2 wheel robot technique is getting attention and there have been many researches on the seg-way since the US. Using its 2 freedom, a 2 wheel robot can move in various modes and Our robot performs goal reaching ARS.2 wheel robot fall down to the forward or reverse direction to converge to the stable point. Kalman Filter is normally used for the algorithm and numerous research is progressing at the moment. To calculate the attitude in ARS using 2 axis gyro(roll, pitch) and 3 axis accelerometers (x, y, z). In this paper we present a two wheel robot system for an autonomous mobile robot. This paper realized the robot control method which is much simpler but able to get desired performance by using the ARS control.

• 전자공학회논문지 IE
• /
• v.43 no.4
• /
• pp.136-142
• /
• 2006

As the function and interface for controlling the robot is more complicated, the robot platform which can link effectively between software and hardware is need to develop the robot easily. In this paper, we developed a humanoid robot that interests in robot industry part for robot platform with network communication function.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.3
• /
• pp.210-216
• /
• 2005

Digital manufacturing could be very effective in shipbuilding in order to estimate the process time, to improve the operation efficiency, and to prevent bottleneck processes in advance. The subassembly process having done research consists of piece arrangement, tack welding, robot welding, manual welding and so on. The robot welding of them was the focus of the simulation. The analysis and modeling were carried out by using UML (Unified Modeling Language) as well as $IDEF\phi$ (Integration DEFinition). The characteristics of the process resources were analyzed using the shipyard data, and the layout of the subassembly line was designed with the resources. Using the constructed resource and process model, the productivity and efficiency of changed robot welding stage were investigated. It was simulated how much the variations in the resource performance have influence on improvement of productivity. One of the important outputs in this simulation was the cycle time during a certain period's work. The cycle time prediction was also undertaken for the different torch and the different piece arrangement. The proposed model was established three-dimensionally in a digital environment so that interferences among objects and space allocations for the resources could be easily investigated.