• Macromolecular Research
• /
• 제9권6호
• /
• pp.313-318
• /
• 2001

The present study relates to a method of manufacturing 100$\mu\textrm{m}$ thick cover layer for the high density digital versatile disc system (HD-DVD), which uses a high numerical aperture of 0.85 at 405 nm wavelength. Spin coating technique was investigated as means for manufacturing the cover layer within sufficient margins of thickness variation and with good mechanical properties including small radial and tangential tilts. The influence of processing variables such as spinning speed, spinning time, and dispensing position was investigated. The effect of viscosity of UV-curable resin was also investigated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.1938-1939
• /
• 2001

시스템을 입력과 출력간의 함수관계로 볼 때 출력에 대한 상대차수가 정의되지 않는 점을 특이점이라고 정의할 수 있다. 본 논문에서는 적절한 기하학적 조건을 만족하는 해석적인 시스템(analytic system)에 대하여 그러한 특이점의 성질을 살펴본다. 특이점을 지나는 궤적은 특이점의 특이도와 그에 관련된 함수 값의 부호에 의해서 특이점의 주변에서는 특이 매니폴드를 기준으로 한 영역에서 나머지 다른 영역으로 통과하거나 혹은 그를 기준으로 어느 한 쪽의 영역에만 머물러 있게 됨을 보임으로써 특이점과 이를 지나는 궤적의 상관관계를 명확히 규명하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2008-2010
• /
• 2001

최근에 광 디스크 기기의 고배속화에 따라서 디스크의 재생 속도는 점차로 증가하고 있다. 이러한 경향에 따라 트랙킹 제어 루프에서 나타나는 디스크의 편심에 의한 외란의 영향은 더욱 커지게 되므로 기존의 선형 제어기만으로는 디스크의 편심량이 큰 경우에 고배속에서 원하는 트랙 추종 성능을 얻을 수가 없다. 본 논문에서는 이러한 문제점을 해결하기 위해서 반복 학습 제어 알고리즘과 드라이브 시스템의 액츄에이터의 주파수 응답 특성을 이용한 새로운 트랙 추종 제어 방법을 제안한다. 또한, 제안된 트랙 추종 제어 시스템의 제어 성능을 실험을 통하여 검증하여 본다.

• 대한기계학회논문집B
• /
• 제29권10호
• /
• pp.1119-1129
• /
• 2005

A new measurement system of wall pressure fluctuations on a rotating machinery, composed of digital recording device, was developed and evaluated. The small-sized digital recording device was attached on the rotating machinery and then was detached for data reduction. In order to obtain the system transfer function of the digital recording system, a dynamic calibration was performed utilizing the signal from a 1/8 inch B&K microphone as input. The time history of the unsteady pressure was then reconstructed from the output of the sensor by using this transfer function. The reconstructed pressure signals showed good agreement with the reference signal in both temporal and spectral sense. This sensor was then used to measure the wall pressure fluctuations on a rotating blade. An array of microphones were installed on the blade in the circumferential and radial directions. Various statistical moments were obtained from the measurement data set. Comparison of these quantities with the existing studies demonstrated satisfactory agreement. These tests give credence to the relevance and reliability of this device for applications in more complicated turbulent rotating machineries.

• 전자공학회논문지B
• /
• 제33B권6호
• /
• pp.164-175
• /
• 1996

In this thesis, to cope with severe intersymbol interference and nonlinear distotions of the digital magnetic recording channel a neural decision feedback equalizer (NDFE) and an adaptive neural equalizer (NE) are applied. The digital magnetic recording channels with various recording densities and different types of the nonlinear distortions are considered. The computer simulation shows that as the nonlinear distortion is increased, the neural equalizers (NdFE, NE) have advantages of approximately 2-4 dB in signal to noise ratio (SNR) over the onventional eualizers to reach sme bit error rate and, a sthe recording density is increased, 1~5 dB of SNR improvement are also gained. Especially the NdFE gives a superior performance over the other equalizers when there is a severe nonlinear distortion in the digital magnetic channel.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.16-27
• /
• 2015

Holography technology which was developed by Dennis Gabor (1900~1979) in 1948 is a technology to record wave planes of actual 3D objects. It is known as the only technology which can express 3D information most perfectly close to human-friendly. Holography technology is widely used in advertisement, architecture and arts as well as science technology areas. Especially, digital holographic print which is an applied area is greatly used in military map, architecture map and cultural asset restoration by printing and reproducing 3D information. Holography is realized by recording and reproducing the amplitude and phase information on high resolution film using coherent light like laser. Recording materials for digital holographic printer are silver halide, photoresist and photopolymer. Because the materials have different diffraction efficiency according to film characteristics of each manufacturer, appropriate guide lines should be suggested through efficiency analysis of each film. This paper suggests appropriate guide lines through the diffraction efficiency measurement of silver halide which is a holographic printer recording medium. And the objective of this study is to suggest appropriate guide lines through diffraction efficiency analysis of Ultimate 08-C and PFG-03C which are commercially used. The experiment was prepared by self-diffraction efficiency system which measures the strength with the defector by penetrating RGB recording medium and concentrating diffracted beams through collimating lens. The experiment showed Geola's PFG-03C which is a silver halide for full color has price/performance advantage in optical hologram recording, but recording angles and reproduction angles are irregular for digital holographic printer recording. Ultimate's Ultimate08-C for full color shows its diffraction efficiency is relatively stable and high according to recording angles and laser wavelength.

• 전자공학회논문지B
• /
• 제32B권12호
• /
• pp.1565-1571
• /
• 1995

Misalignment of recording head position results in inter-track interference (ITI), which is a primary factor limiting radial(track) density in current digital magnetic channels. This paper proposes a multi- channel adaptive PRML for digital high-density recording channels, and compares it with the conventional single-channel PRML in the presence of ITI for the per- formance evaluation. Simulation results show that the proposed method removes ITI effectively when heal-misalignment occurs, then improving its performance significantly as compared with the single- channel PRML. As a result, it is confirmed that multi-channel adaptive PRML is well suited for high-density recording in digital magnetic channels.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1028-1030
• /
• 2007

Mutual compensating concept between SIL(Solid Immersion Lens) and OL(Objective Lens) of NFR(Near Field Recording) is proposed, designed and manufactured to achieve a high NA and obtain a wider manufacturing tolerance. Tolerance information is present in article. An effective NA of Advanced SIL is 1.7 and adjustment between OL and SIL is carried out using our interferometer. We measured very clear RF signal using 3-axis actuator at Test bed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.382-385
• /
• 2003

Introduction of digital broadcasting service does not only mean the change of information transmission method but also the change of total broadcasting system. In past day, Television was only received one-sided information from broadcasting station, but digital broadcasting means that digital television becomes the most important means of information transmission by the introduction of new programming, lots of channels, data service, multi communication. In the age of the digital broadcasting, the recording and replay medium's interest is getting higher. The medium is able to record more than 24 hours' digital broadcasting programs without additional tapes. In this paper the recording and replay device using HDD was implemented and device driver based on linux was programmed. It has Intel PXA250 processor and hard disk is used as storage equipment. And transport Stream is saved on hard disk through PXA250's data bus. FIFO is added to solve the different saving speed and FPGA is also added to display the saved data.

• 한국산업정보학회논문지
• /
• 제17권2호
• /
• pp.29-32
• /
• 2012

Computer generated holography (CGH) is technology for generating holograms of synthetic, three dimensional (3D) objects which may not exist in the physical world. The process, however, requires heavy amount of computation as the resolution of a hologram is significantly higher than that of a typical optical image. This paper reviews four modern techniques for fast generation of digital Fresnel holograms which are important in the development of holographic video systems. The methods that will be described include the virtual window, sub-line, wavefront recording plane (WRP), and the interpolative WRP schemes. These works share the common objective to generate digital Fresnel hologram at a speed that is close to the video frame rate, and with complexity which is realizable with affordable computing and reconfigurable hardware devices. The author will present the principles and realization of these works, as well as some potential area of research in digital holography.