• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.255-260
• /
• 2000

This paper presents a radio-telemetry patient monitor. which is used for intensive cal?e units. emergency and surgical operation rooms to monitor continuously patients' vital signs. The radio-telemetry patient monitor consists of a vital sign acquisition unit. wireless data transmission units and a vital sign-monitoring unit. The vital sign acquisition unit amplifies biological signals, performs analog signal to serial digital data conversion using the one chip micro-controller. The converted digital data is modulated FSK in UHF band using low output power and transmitted to a remote site in door. In comparison with analog modulation. FSK has major advantages to improve performance with respect to noise resistance with fower error and the potential ability to process and Improve quality of the received data. The vital sign-monitoring unit consists of the receiver to demodulate the modulated digital data, the LCD monitor to display vital signs continuously and the thermal head printer to record a signal.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.6
• /
• pp.360-368
• /
• 2022

PURPOSE. This study assessed the physical and mechanical properties of interim crown materials fabricated using various digital techniques after accelerated aging. MATERIALS AND METHODS. Three groups of interim dental restorative materials (N = 20) were tested. The first group (CO) was fabricated using a conventional manual method. The second group (ML) was prepared from prefabricated resin blocks for the milling method and cut into specimen sizes using a cutting disc. The third group (3D) was additively manufactured using a digital light-processing (DLP) 3D printer. Aging acceleration treatments using toothbrushing and thermocycling simulators were applied to half of the specimens corresponding to three years of usage in the oral environment (N = 10). Surface roughness (Ra), Vickers microhardness, 3-point bending, sorption, and solubility tests were performed. A 2-way analysis of variance (ANOVA) and Fisher's multiple comparison test were used to compare the results among the groups. RESULTS. The mean surface roughness (Ra) of the resin after accelerated aging was significantly higher in the CO and ML groups than that before aging, but not in the 3D group. All groups showed reduced hardness after accelerated aging. The flexural strength values were highest in the 3D group, followed by the ML and CO groups after accelerated aging. Accelerated aging significantly reduced water sorption in the ML group. CONCLUSION. According to the tested material and 3D printer type, both 3D-printed and milled interim restoration resins showed higher flexural strength and modulus, and lower surface roughness than those prepared by the conventional method after accelerated aging.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.6
• /
• pp.23-32
• /
• 2010

Caused by the development of IT environment, the frequency of using the embedded machines is increasing in our regular life. A typical example of these embedded machines is a Multi Function Copier and it has various functions; it is used as copier, scanner, fax machine, and file server. We would like to check the existence of and the way to abstract the data that may have been saved through using the scanner of the multi function printer and discuss how to use those data as the evidence.

• Smart Structures and Systems
• /
• v.30 no.1
• /
• pp.35-47
• /
• 2022

Data-driven engineering is crucial for information delivery between design, fabrication, assembly, and maintenance of prefabricated structures. Design for manufacturing and assembly (DfMA) is a critical methodology for prefabricated bridge structures. In this study, a novel concept of digital engineering model that combined existing knowledge of DfMA with object-oriented parametric modeling technologies was developed. Three-dimensional (3D) geometry models and their data models for each phase of a construction project were defined for information delivery. Digital design models were used for conceptual design, including aesthetic consideration and possible variation during fabrication and assembly. The seismic performance of a bridge pier was evaluated by linking the design parameters to the calculated moment-curvature curves. Control parameters were selected to consider the tolerance control and revision of the digital models. Digitalized fabrication of the prefabricated members was realized using the digital fabrication model with G-code for a concrete printer or a robot. The fabrication error was evaluated and the design digital models were updated. The revised fabrication models were used in the preassembly simulation to guarantee constructability. For the maintenance of the bridge, the as-built information was defined for the prefabricated bridge piers. The results of this process revealed that data-driven information delivery is crucial for lifecycle management of prefabricated bridge piers.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.427-428
• /
• 2006

This paper presents an image fingerprinting scheme for the print-to-capture model performed by a photo printer and digital camera. When capturing an image by a digital camera, various kinds of distortions such as noise, geometrical distortions, and lens distortions are applied. slightly and simultaneously. In this paper, we consider several steps to extract fingerprints from the distorted image in print-and capture scenario. To embed ID into an image as a fingerprint, multi-bits embedding is applied. We embed 64 bits information as a fingerprint into spatial domain of color images. In order to restore a captured image from distortions a noise reduction filter is performed and a rectilinear tiling pattern is used as a template. To make the template, a multi-bits fingerprint is embedded repeatedly like a tiling pattern. We show that the extracting is successful from the image captured by a digital camera through the experiment.

• Journal of Wind Energy
• /
• v.5 no.1
• /
• pp.33-42
• /
• 2014

The new aerofoil, KA2 was designed to apply to the wind turbine blade. For the aerofoil, numerical analysis was performed to review aerodynamic characteristics like lift and drag coefficient. And they are verified with test data using the digital wind tunnel and test samples from 3D printer. The digital wind tunnel was developed to test wing in the small laboratory, and verified with test of NACA0012 airfoil. KA2 aerofoil is asymmetric, and has the thickness ratio of 14%, and 12 degree of AOA at the maximum lift coefficient of 1.3. In this paper, aerodynamic characteristics from numerical and test approaches will be proposed with AOA in detail. Therefore, this aerofoil will be used for the design of wind turbine blade.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.2
• /
• pp.67-73
• /
• 2010

Whole process of textile printing is made by computer and it remarkably improves environment problem. This digital textile printing is becoming next step environment friendly textile printing method. But, still now range of textile possible for digital textile printing is limited, and also color analysis according to fiber types is not completed. The ink printed on the fabrics through DTP printer can be absorbed and fixed into textile without any blots by pre-treatment using suitable media solution for fabrics types. The chemical formulation of media solution used in the pre-treatment process varies according to the types of textiles and inks for DTP products. First, I studied reference books or articles about color analysis of digital textile printing. Second, I recorded pre-process, printing, post-process and coloring of silk, wool, nylon at same condition. After that, I analyzed $L^*\;a^*\;b^*$, Total K/S, ${\Delta}E$ and studied color intensity and coloring. According to this study, I suggested particular textile special for coloring and manual for affective coloring control. It showed that the performance of the digital printing on the Silk, Wool and Nylon blend fabrics treated by the media solution developed in this study was better than the one treated by the previous media solution for each single inks.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.45-48
• /
• 2000

In this paper, we designed bluetooth module using 2.4 GHz ISM band. Bluetooth is wireless networking solution that connects PDA, cellular phone, printer, PC, etc each other. We integrated digital and RF part in one module. As a result, we can make low power consumption module that enables long battery life. In addition, we enlarged maximum available range of our module from 10m to l00m. This module satisfies bluetooth specification 1.0.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.2
• /
• pp.1-20
• /
• 1996

we describes a method for realizing the color conversion from the tristimulus (X, Y, Z) values to the print ink signals (C, M, Y) by using neural networks. The realized nonlinear color conversion system consists of two hidden layers those have seventeen nodes. We determined the C, M, Y values of the input control signals to compensate the printer nonlinearity of real systems. Experimental results showed that the described method is useful and valid to realized the nonlinear color conversion.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.14 no.2
• /
• pp.37-49
• /
• 1996

The practical lith developer is a hydroquinone solution of moderate alkalinity and low free-sulfite ion concentration with potassium bromide as the restraining agent. In the study on composition of ilth developer to promote high sensitivity, high contrast and long term preservation or use, a new composition of lith developer, namely PK lith developer, was developed and of was found that PK lith developer was superior to the lith developer which was commercially available in terms of contrast, speed and preservation. This paper also describes studies on the addition of hdydrazine to PK lith developer, which have led to further improvements in the system.