• 대한방사선기술학회지:방사선기술과학
• /
• 제41권1호
• /
• pp.61-66
• /
• 2018

The recent 3D printing technology is used in various medical, manufacturing, and education fields and is more efficient in terms of production process, time, and cost than existing production. Especially in fracture surgery, interest and research have been focused on improving accuracy, shortening of operation time and recovery time, and reducing reoperation. However, because of the financial and technical problems of the 3D printer and the file conversion program, the 3D printing is made directly at the hospital, and it is not generally used for diagnosis of fracture and surgical research. In this study, to solve those problems, clavicle CT imaging was switched into Osirix Open Source DICOM Viewer, Stereolithography file conversion programs and commercial Terarecon 3D DICOM Viewer, file conversion programs, and then clavicle fracture model was directly made through 3D printer of fused filament fabrication wire additive processing method, and then the accuracy of the shape was compared and analyzed. Clavicle fracture models printed in two methods were blind-tested on clinicians of general hospitals' orthopedics and radiologic technicians with over 10 years of experiences, and then their analysis opinions of resolution reviews were analyzed. The result showed no difference. The 3D printing model with open source DICOM STL file conversion program used was applicable to clinical, so it is considered useful in precision diagnosis of fracture and operation plans.

• 한국정보통신학회논문지
• /
• 제22권12호
• /
• pp.1645-1652
• /
• 2018

군사적 용도로 처음 개발된 드론(drone)은 현재 드론 관련 기술의 발전으로 인해 다양한 용도로 군사적 용도 외 민간 분야에서도 개발되어 사용할 수 있게 되었다. 이러한 분야 중 영상 촬영을 목적으로 개발된 촬영용 드론은 드론에 카메라를 장착하여 현재 영화나 방송분야를 넘어 다양한 영상콘텐츠 제작 분야에서 활발히 사용되고 있다. 촬영용 드론은 기존의 촬영 기술로는 촬영하기 어려웠던 현장성과 역동성 있는 영상 촬영을 가능하게 해 준다. 본 논문은 드론을 이용하여 촬영을 할 때 드론 조종자가 드론을 조정하면서 드론 카메라가 촬영하는 피사체를 직접 보면서 드론을 조종할 수 있는 뷰파인더를 제작하였다. 제작한 드론용 뷰파인더는 안경 형식으로 3D MAX로 모델링한 데이터를 3D 프린터로 출력하여 초소형 LCD 모니터를 장착하는 과정으로 제작하였다. 이렇게 제작된 드론 촬영용 뷰파인더는 드론의 안전한 비행과 함께 촬영하고자 하는 피사체의 정확한 프레이밍 촬영을 가능하게 해 준다.

• 대한치과기공학회지
• /
• 제42권4호
• /
• pp.355-361
• /
• 2020

Purpose: In this study, we added two kinds of photoinitiators (CQ and TPO) to prepare two kinds of denture base resins (Bis-GMA series and UDMA series) for three-dimensional (3D) printing to compare and analyze their mechanical and biological properties and to find the optimal composition. Methods: Control specimens were made using the mold made of polyvinyl siloxane of the same size. Light curing was performed twice for 20 seconds on both the upper and lower surfaces with LED (light emitting diode) light-curing unit (n=10). Experimental 3D printing dental resins were prepared, to which two photoinitiators were added. Digital light processing type 3D printer (EMBER, Autodesk, CA, USA) was used for 3D printing. The specimen size was 64 mm×10 mm×3.3 mm according to ISO 20795-1. The final specimens were tested for flexural strength and flexural modulus, and MTT test was performed. Furthermore, one-way analysis of variance was performed, and the post-test was analyzed by Duncan's test at α=0.05. Results: The flexural strength of both Bis-GMA+CQ (97.12±6.47 MPa) and UDMA+TPO (97.40±3.75 MPa) was significantly higher (p<0.05) in the experimental group. The flexural modulus in the experimental group of UDMA+TPO (2.56±0.06 GPa) was the highest (p<0.05). MTT test revealed that all the experimental groups showed more than 70% cell activity. Conclusion: The composition of UDMA+TPO showed excellent results in flexural strength, flexural modulus, and biocompatibility.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2009년도 추계학술대회
• /
• pp.54-57
• /
• 2009

This study was aimed to investigate the effects of visual texture on color emotion and to establish prediction models for color emotion by both physical color properties and visual texture characteristics. A variety of fabrics were printed by digital printer according to hue and tone combinations. Subjective sensation was evaluated in terms of visual texture for fabrics printed in gray whereas color emotion for those in chromatically printed. As results, fabric clusters by visual texture showed significant differences in color emotion factors and the differences were clearer for grayish tone fabrics. Prediction models for color emotion factors by both physical color properties and visual texture clusters were proposed as for all fabrics and grayish ones, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.126-126
• /
• 2012

In past decades, the themal inkjet (TIJ) printer has been widely used as one of the most well-known digital printing technology due to its low cost, and high printing quality. Since the printing speed of TIJ printers are much slower than that of laser printers, however, there has been intensive efforts to raise the printing speed of TIJ printers. One of the most plausible methods to raise the printing speed of TIJ printers is to adopt a page-wide array TIJ printhead. To accomplish this goal, the high efficiency inkjet heating resistor films should be developed to settle the high power consumption problem of a page-wide array TIJ printhead. In this study, we investigated noble metal based multicomponent thin film resistor films prepared by atomic layer deposition (ALD) for a high efficiency inkjet printhead. Design concept, preparation, material properties of noble metal based multicomponent thin films will be discussed in terms of mutlfunctionality.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.266-267
• /
• 2008

ERP(Enterprise Resource Planning) 및 그룹웨어 등의 전자적인 메일, 결재, 문서 관리 수단의 발달에도 불구하고 금융 및 산업계의 프린팅 수요는 매년 급증하고 있다[1]. 특히 근래의 프린터는 스캐닝, 복사, 프린팅 보안 시스템 등의 다양한 기능들이 융복합화 하면서 사무실에서의 문서 수요와 관리를 책임지는 시스템으로 진화하였다[2]. 다양한 문서 포맷에 대한 프린터의 직접 지원도 ubiquitous의 시나리오에 필수적인 아이템이 되어 가고 있다[2]. 이에 본 논문에서는 인터넷 공간에서 가장 널리 쓰이는 문서 포맷의 하나인 Adobe사 PDF(Portable Document Format) 문서 포맷을 중심으로 프린터에서 직접 문서 해독 및 이미지 처리와 렌더링을 수행하는 S/W 시스템에 대해 그 아키텍쳐와 구현 예를 보이고자 한다. 아울러 임베디드 시스템에서 direct printing S/W의 고려 사항에 대해 논하고자 한다.

• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.31-42
• /
• 2003

The optimum color proofing system with the similar colorants to the printing system has to be used in high quality offset color printing. And so, the evaluation on color reproduction properties of the colorants for proofer and press are very important. In this paper, the optimum color proofing method is recommended by means of colorimeric comparative evaluation on the color reproduction properties such as color gamut, color difference, hue error of the colorants for the proofing system of CRT monitor, inkjet printer, dye sublimation type digital proofer, and the actual printing system of offset press.

• Journal of Biosystems Engineering
• /
• 제11권1호
• /
• pp.8-16
• /
• 1986

This study was carried out to develop a microcomputer-based data acquisition system for engine performance test. A low-cost data acquisition system was developed utilizing an "APPLE II PLUS" microcomputer. The developed system consists of microcomputer, RPM counter included frequency-to-voltage converter, preamplifier for two load cells and 8-bit analog-to-digital converter with 16 chnnels. The system simultaneously measures engine speed by means of photointerrupter, torque and fuel consumption by means of load cells with variable sample numbers, sampling intervals and repetitions. The system collects, processes and provides data for storing on the $4{\frac{1}{4}}$ inch floppy disk as well as for writing out on the printer.

• 한국인쇄학회지
• /
• 제15권1호
• /
• pp.71-83
• /
• 1997

In recent years, various kinds of organic photoreceptors have been used for copy machines based on electrophotography. Most of them are constructed into layered devices in which a photogeneration layer is separated from a charge transport layer. They are usually used with application of negative charges. Organic pigment have received considerable attention with phthalocyanine, squaraine, and azo compounds being used to construct zerograpgic photoreceptors with enhanced long wavelength sensitivity, residual potential and zerograpgic gain of squaraine photoconductor were measured from the photoinduced discharge curve. Most of synthesized squaraine derivative couldn`t use for CGM(charge generation material), but it knew that a part of one was able to use it within the possibility. A few appliance is used it know about dependence on CTM(charge transport material) of squaraine derivative. It could know that experiment`s result is 2.5-bis(4-N-N`-diethylaminophenyl)-1,3,4-oxadiazole(OXD) is the bestproduct.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2012년도 춘계학술발표대회논문집
• /
• pp.231-233
• /
• 2012

컴퓨터 및 프린터 기술의 발전으로 디지털 문서 활용 사례가 전 분야에 확산되면서 디지털 문서의 위 변조 범죄가 증가하고 많은 사회적인 문제를 야기하고 있다. 이러한 컴퓨터를 이용한 범죄의 증거를 수집하고 분석하기 위해 디지털 포렌식 기술의 발전이 더욱 중요해지고 있다. 디지털 포렌식은 PC나 휴대폰 등 각종 디지털 매체 등에 남아 있는 디지털 정보들을 수집 분석해 범죄 단서를 찾는 컴퓨터 법의학이다. 본 논문에서는 프린터기로 출력된 문서의 고해상도 영상현미경 이미지를 사용하여 원본 여부를 판별 할 수 있는 프린터기 동일 여부 판별 기술을 제안한다.