• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.99-105
• /
• 2018

This paper proposes multiple access method for smart doorlock system using VLC(Visible Light Communication) with color grid modulation method. The proposed method is to connect multiple visible light signals using color grid modulation method in order to recognize and authenticate multiple users accessing doorlock. In order to enable visible light multiple access with existing infrastructure, the symbol energy interval of signal should be maximized. Thus, performance of system in VLC channel is measured by modulating symbols based on the proposed method. We confirm the actual channel test results of the modulated signal to implement doorlock system that recognizes the number of multiple access users.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.1
• /
• pp.67-76
• /
• 2019

Despite attractive advantages such as good time-frequency localization and improved spectral efficiency, filter bank multicarrier with offset quadrature amplitude modulation (FBMC/OQAM) suffers from multipath fading. In highly frequency-selective channels, the effect of multipath interference can significantly distort the FBMC/OQAM signal due to the absence of cyclic prefix. To resolve the problem of the multipath interference in FBMC/OQAM, this paper proposes applying an antenna array that provides well shaped beam pattern for each multipath. To evaluate the performance of the proposed array system, various computer simulations have been conducted. The accuracy of direction of arrival estimation is demonstrated through spatial spectrum for a different number of antennas in a sub-array. The performance improvement is presented in terms of bit error rate. We found that the proposed array system mitigate the multipath interferences in Extended Typical Urban model with 12 antennas in a sub-array. Moreover, as the number of antennas in a sub-array increases, the system provides a signal-to-noise ratio gain.

• Journal of Broadcast Engineering
• /
• v.24 no.3
• /
• pp.485-494
• /
• 2019

A software-driven real-time frequency de-modulator is implemented with the aid of universal-serial-bus (USB) type software defined radio dongle. An analog stereo frequency modulation (FM) broadcast signal is down-converted to the basedband analog signal then converted to digital bit streams in the USB dongle. Computer software such as Matlab, Python, and GNU Radio manipulates the incoming bit streams with the technique of digital signal processing. Low pass filtering, band pass filtering, decimation, frequency discriminator, double sideband amplitude demodulation, phase locked loop, and deemphasis function blocks are implemented using such computer languages. Especially, GNU Radion is employed to realize the real-time demodulator.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.1-14
• /
• 1998

In this paper, Antenna, LNA, Mixer, VCO, and Modulation/Demodulation in Baseband processor which are the RF main components in Wireless LAN system for ultra high-speed communications network are studied. Antenna bandwidth and selective fading due to multipath can be major obstacles in high speed digital communications. To solve this problem, wide band MSA which has loop-structure magnetic antenna characteristics is designed. Distributed mixer using dual-gate GaAs MESFET can achieve over 10dB LO/RF isolation without hybrid, and minimize circuit size. As linear mixing signal is produced, distortions can be decreased at baseband signals. Conversion gain is achieved by mixing and amplification simultaneously. Mixer is designed to have wide band characteristics using distributed amplifier. In VCO design, Oscillator design method by large signal analysis is used to produce stable signal. Modulation/Demodulation system in baseband processor, DS/SS technique which is robust against noise and interference is used to eliminate the effect of multipath propagation. DQPSK modulation technique with M-sequences for wideband PN spreading signals is adopted because of BER characteristic and high speed digital signal transmission.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.821-824
• /
• 2005

This paper presents a technique to evaluate torque and speed characteristics of induction motor with the Dynamometer. The simple Dynamometer controlled via microcontroller and displayed by computer. The Microcontroller generates the PWM (Pulse Width Modulation) signal and control the duty cycle of signal for control braking level. The Buck converter is a braking unit which uses IGBT as switch in circuit. The output current of the Buck converter and output voltage of tacho generator are converted to digital signals and analyzed by microcontroller. The signals are then sent to computer for displaying torque and speed responds independent on the braking time. The test results of the Dynamometer in this research can coreectly predict the torque and speed response under reasonable tests. Moreover, this Dynamometer is easy and inexpensive to make.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.514-522
• /
• 2013

In this paper, we present signal processing procedure and carry out performance analysis of FMCW(Frequency Modulation Continuous Wave) radar for Autonomous Unmanned Vehicle(AUV). In order to detect range profile and velocity of the unknown target, we must implement two step FFT(Fast Fourier Transform) procedure. And the DBF(Digital Beam Forming) algorithm has to be performed to obtain the angle information of the unknown target. To verify the performance of manufactured autonomous unmanned ground vehicle FMCW radar, we use the data of the real corner reflecter target.

• Journal of Advanced Navigation Technology
• /
• v.7 no.2
• /
• pp.141-148
• /
• 2003

This paper presents and compares several techniques that detect the symbol rate of unknown received signal. Symbol rate is detected from the power spectral density of the circuits such as the delay and multiplier circuit, the square law circuit, and analytic signal, etc. As a result of discrete Fourier transform of the output signals of these circuits, a lot of spectral lines and some peaks appear in frequency domain and the position of first peak is corresponding to the symbol rate. If a spectral line on the frequency that is not located in symbol rate is larger than the first peak, the symbol rate is erroneously detected. Thus, the ratio between the value of first peak and the highest side spectral line is used for the measure of the performance of symbol rate detector. For the MPSK modulation, the analytic signal method shows better performance than the delay and multiplier and square law circuits when the received signal power is lager than -20dB. It is also noted that the delay and multiplier circuit is not able to detect the symbol rate for the QAM modulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.6
• /
• pp.479-485
• /
• 2013

Recently, interest for wireless communication technology with improved security and low eavesdropping probability is increasing rapidly recognizing that information security is an important. Chaos signal can be used encode information efficiently due to irregular phenomena. Chaotic signal is very sensitive to the initial condition. Chaos signal is difficult to detect the signal if you do not know the initial conditions. Also, chaotic signal has robustness to multipath interference. In this paper, we evaluate the performance of correlation delay shift keying (CDSK) modulation with different chaotic map such as Tent map, Logistic map, Henon map, and Bernoulli shift map. Also, we analyze the BER performance depending on the selection of spreading factor (SF) in CDSK. Through the theoretical analyses and simulations, it is confirmed that Henon map has better BER performance than the other three chaotic maps when spreading factor is 70.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.817-826
• /
• 2001

In this paper, we implemented QPSK(Quadrature Phase-Shift Keying) modem which is widely used for communication systems, using a general Digital Signal Processor(DSP), TM320C31. Up to now, almost all of communication systems consist of hardware. However, the implemented system herein is composed of software and hardware part. Software part includes the modulation process, before passing D/A(Digital-to-Analog Converter) and the demodulation process, after passing A/D(Analog-to-Digital Converter) in IF(Intermediate Frequency) node. Hardware part is related to input, output and process of signal. To demonstrate the successful implementation of modem, the output results obtained from DSP processor are compared with the simulated result on the personal computer.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.216-225
• /
• 2012

This paper presents a transceiver module for human body communications whereby a spread signal with a group of 64 Walsh codes is directly transferred through a human body at a chip rate of 32 Mcps. Frequency selective digital transmission moves the signal spectrum over 5 MHz without continuous frequency modulation and increases the immunity to induced interference by the processing gain. A simple receiver structure with no additional analog circuitry for the transmitter has been developed and has a sensitivity of 250 ${\mu}V_{pp}$. The high sensitivity of the receiver makes it possible to communicate between mobile devices using a human body as the transmission medium. It enables half-duplex communication of 2 Mbps within an operating range of up to 170 cm between the ultra-mobile PCs held between fingertips of each hand with a packet error rate of lower than $10^{-6}$. The transceiver module consumes 59 mA with a 3.3 V power supply.