• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.291-297
• /
• 1998

In order to accomplish the digital map production I/O devices should be used which are used for data input procedure to convert original paper map(hardcopy) data into computer compatible digital map data, and for the mapsheet output procedure of worked out data. For the input device, digitizer and scanner are most frequently used. Digitizer has possibility of direct production of digital data, and are mainly used for input procedure of partly plotted source map. In contrary, scanner is rather easy to operate the instrument, so that is widely used for the input procedure of original sheet map. In this study, to extract the input device characteristics, some kinds of digitizers and scanners were cheesed and used for the positional error analysis through the operational method and types of instruments. Also for the output device characteristics, some kinds of plotter and materials are used and compared to analyze the positional error through the instrumental types and output sheet materials.

• The Research Journal of the Costume Culture
• /
• v.14 no.6
• /
• pp.932-944
• /
• 2006

With supplied computers and the development of information and communication thropugh the Internet, the space of personal home pages in potal sites has been filled with photos taken by digital cameras, and 'the introduction of privacy' done in the personal home pages has become a general trend in society. As the use of Photoshop, available to edit and modify digital photos, in this social atmosphere, has grown general, they have shown their interest in the retouching technique of Photoshop. Computer graphics, marked based on the treatment of a variety of information into pictures or a technology to mark it, recently various application methods have been found in make-up. Especially, Adobe Photoshop, used to edit and modify images, is a sofetware program proper to perform beauty make-up in correcting and creating images in an effective way. The purpose of this study is to express each factor in Adobe Photoshop CS2 about the beauty make-up. As a result, I can say, the process that digital image is retouched by Adobe Photoshop CS is similar work to beauty make-up. The process of Photoshop retouching can be used as the materials for educating of make-up and as the materials for presentation of beauty make-up trend. And also we can serve the simulation to the customer before real make-up. Therefore, this study is for the effective performance of diverse beauty makeup integrating retouch technique with Photoshop CS.

• Smart Structures and Systems
• /
• v.17 no.1
• /
• pp.91-105
• /
• 2016

One of the most commonly used techniques to strengthen steel reinforced concrete structures is the application of externally bonded patches in the form of carbon fiber reinforced polymers (CFRP) or recently, textile reinforced cements (TRC). These external patches undertake the tensile stress of bending constraining concrete cracking. Development of full-field inspection methodologies for fracture monitoring are important since the reinforcing layers are not transparent, hindering visual observation of the material condition underneath. In the present study acoustic emission (AE) and digital image correlation (DIC) are applied during four-point bending tests of large beams to follow the damage accumulation. AE helps to determine the onset of fracture as well as the different damage mechanisms through the registered shifts in AE rate, location of active sources and change in waveform parameters. The effect of wave propagation distance, which in large components and in-situ can well mask the original information as emitted by the fracture incidents is also discussed. Simultaneously, crucial information is supplied by DIC concerning the moments of stress release of the patches due to debonding, benchmarking the trends monitored by AE. From the point of view of mechanics, conclusions on the reinforcing contribution of the different repair methodologies are also drawn.

• Journal of Biomedical Engineering Research
• /
• v.45 no.3
• /
• pp.109-117
• /
• 2024

We developed a device that integrates digital otoscope and stethoscope for telemedicine. The integrated device was utilized for the collection of tympanic membrane images and cardiac auscultation data. Data accumulated on the platform server can support real-time diagnosis of heart and eardrum diseases using artificial intelligence. Public data from Kaggle were used for deep learning. After comparing with various deep learning models, the MobileNetV2 model showed superior performance in analyzing tympanic membrane data, and the VGG16 model excelled in analyzing cardiac data. The classification algorithm achieved an accuracy of 89.9% for eardrums data and 100% for heart sound data. These results demonstrate the possibility of diagnosing diseases without the limitations of time and space by using this platform.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.1
• /
• pp.33-42
• /
• 2011

As the development of construction technology and new materials, building requirements has been varied gadually. Comfortable environment and serviceability of production activity and energy conservation are being dealt with very seriously. Recently localization of engineering technology of Power Plant, however, construction materials and domestic technology are being developed forcingly. According to above topics this thes is going to study roof waterproofing, thermal insulation and evaluate adiabatic performance and evaluation of properties of waterproofing materials and energy conservation. The results of studying and evaluating of roof waterproofing, thermal insulation and adiabatic performance of Power Plant are as follows. 1. Sheet waterproofing method is better than that of asphalt waterproofing method in that adaptability of wearhertight, thermal resistant, contraction and expansion. 2. It is required to replace polyurethane or ethylene used as thermal insulation with rock wool which is noncombustible materials. 3. It is recommended to usd outer insulation method than inner insulation method due to superioty of outer insulation method. Efficiency of insulation materials used in power plant is generally good except perlite mortar used in the power plant(YGN 1-2, GRI 1-2).

• ETRI Journal
• /
• v.31 no.6
• /
• pp.717-724
• /
• 2009

This paper describes a 1.2 V 12 b 60 MS/s CMOS analog front-end (AFE) employing low-power and flexible design techniques for image signal processing. An op-amp preset technique and programmable capacitor array scheme are used in a variable gain amplifier to reduce the power consumption with a small area of the AFE. A pipelined analog-to-digital converter with variable resolution and a clock detector provide operation flexibility with regard to resolution and speed. The AFE is fabricated in a 0.13 ${\mu}m$ CMOS process and shows a gain error of 0.68 LSB with 0.0352 dB gain steps and a differential/integral nonlinearity of 0.64/1.58 LSB. The signal-to-noise ratio of the AFE is 59.7 dB at a 60 MHz sampling frequency. The AFE occupies 1.73 $mm^2$ and dissipates 64 mW from a 1.2 V supply. Also, the performance of the proposed AFE is demonstrated by an implementation of an image signal processing platform for digital camcorders.

• Smart Structures and Systems
• /
• v.24 no.6
• /
• pp.759-768
• /
• 2019

In nuclear fusion reactors, the key structural component (i.e., the plasma-facing component) undergoes high heat flux cyclic loading. To ensure the safety of fusion reactors, an experimental study on the temperature-induced creep of stainless steel under heat flux cyclic loading was performed in the present work. The strains were measured using a stereo digital image correlation technique (3D-DIC). The influence of the heat haze was eliminated, owing to the use of a vacuum environment. The specimen underwent heat flux cycles ($500^{\circ}C-1000^{\circ}C$) with different mechanical preloads (0 kN, 10 kN, 30 kN, and 50 kN). The results revealed that, for a relatively large preload (for example, 50 kN), a single temperature cycle can induce a residual strain of up to $15000{\mu}{\varepsilon}$.

• Corrosion Science and Technology
• /
• v.23 no.2
• /
• pp.113-120
• /
• 2024

An attempt was made to apply digital image correlation (DIC) strain analysis to in-situ scanning electron microscopy (SEM) observations of bending deformation to quantify local strain distribution inside a ZnMgAl-alloy coating in deformation. Interstitial-free steel sheets were hot-dipped in a Zn-3Mg-6Al (mass%) alloy melt at 400 ℃ for 2 s. The specimens were deformed using a miniature-sized 4-point bending test machine inside the SEM chamber. The observed in situ SEM images were used for DIC strain analysis. The hot-dip ZnMgAl-alloy coating exhibited a solidification microstructure composed of a three-phase eutectic of fine Al (fcc), Zn (hcp), and Zn2Mg phases surrounding the primary solidified Al phases. The relatively coarsened Zn₂Mg phases were locally observed inside the ZnMgAl-alloy coating. The DIC strain analysis revealed that the strain was localized in the primary solidified Al phases and fine eutectic microstructure around the Zn₂Mg phase. The results indicated high deformability of the multi-phase microstructure of the ZnMgAl-alloy coating.

• Journal of the Korean Society for information Management
• /
• v.19 no.2
• /
• pp.181-201
• /
• 2002

As Information Technology has developed, digital library has an opportunity to change the paradigm of role of library to adjust in digital environment. Digital library has promote information services with digitization of materials. In library fare use is allowed to the public for information services. However, digital copy and transmission is simple in digital environment, to balance between owner and user is not easy but important things. Therefor, current copyright act is revised to adjust these environment but the act restrict the users'accessing digital library through interned, not complied with the motive of revision. Moreover, proposed act which is proposed to facilitate digital library services also extremely limits information services. In this monograph, I will review the copyright act related library and seek for the improved means.

• Archives of Reconstructive Microsurgery
• /
• v.21 no.2
• /
• pp.149-152
• /
• 2012

Purpose: The vessels of peripheral nerves have been extensively studied since Breidenbach used vascularizd nerve grafts. Tayor and Pinel studied the course and distribution of the vessels of peripheral nerves. However, the vessels of digital nerves are still not well known. The objective of this study was to prove vessels of digital nerves and to investigate the pathway of that. Materials and Methods: 36 patients and 2 fresh human cadavers were studied under the microscope and histologic sections under the light microscope.. Results: We found that digital nerves had own arterioles and venules as well as peripheral nerves. This small vessels of digital nerves paralleled the digital nerves or run in a spiral. Digital nerves were abundantly vascularized throught their length by a succession of vessels and by their repeated divisions and anastomoses. Conclusion: The clinical implications of this results can be discussed in relation to the dissection of nerves, the possibility of vasculized nerve grafts.