• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.8-12
• /
• 2003

To protect digital communications and broadcasting that are expected to be increasingly used at frequencies above 1GHz, there is a need to determine permissible disturbance limits for frequency bands above 1GHz according to indicates that better correlates with interference level in digital systems. The quality of digital communications is expressed in terms of bit error rate(BER) or throughput. In this regard, it has been reported that degradation of BER or throughput can be estimated from the amplitude probability distribution (APD) of disturbance amplitude. Therefore, if the APD can simply be measured with a high accuracy, APD will be an optimal index for the assessment of interference in digital communications. In this paper, we show that a measurement method using statistic model of APD has compatibility about performance reduction estimation of WLAN. And through approach of this inspection, we propose numeral models about interference effects of peak value and time rate of spurious.

• Journal of Advanced Navigation Technology
• /
• v.3 no.1
• /
• pp.52-59
• /
• 1999

Digital microwave wideband receiver including linear amplifier, analog-to-digital converter(ADC) and digital signal processor is able to analyze its performance using sensitivity and dynamic range of system. Determination of gain, third-order intermodulation products and ADC characteristics and design criteria for the linear amplifier chain is essential problem for sensitive and dynamic range. Also, if there are two signals with frequencies very close, digital signal processor must be able to separate the two signals. In this paper, we measured dynamic range as gain was changed and determined gain value for the proper sensitivity and dynamic range and high resolution spectrum estimation was used to separate two close signals.

• Journal of the Korean Society for information Management
• /
• v.21 no.3
• /
• pp.125-139
• /
• 2004

In this digital environment, license contracting and technical protection measure are being used by copyright holders as a means to restrict the rights of information users. The study reviewed the conflicting relationship between the copyright law and the contract law for digital resources the use of which is based on license contracting, and investigated the legal interpretations of the conflicting relationship between the two. And then based on the analysis of IF LA's position on copyright in the digital environment, the study suggested the expected role of librarians to cope with the technological overrides of copyright rules and to expand the rights of information users.

• Journal of National Security and Military Science
• /
• s.3
• /
• pp.197-242
• /
• 2005

Active catalog is a kind of digital content that enables consumers to test the functions and features of products from their PCs as if they were using it in real life, by simulating the actions and responses of the product. This new type of interactive digital content can be used extensively to make sales personnel training manuals, sales tools, user manuals and user trouble shooting documents. With active catalogs, companies will be able to compare different designs, show actions according to different functions, and evaluate user reaction to new products without having to produce a single physical prototype or mock-up. At the same time, consumers will be able to understand and 'operate' the product and make well-informed purchase decisions. In this paper, we present a visual event-driven modeling tool, PlayMo, for creating active catalogs, analyze the advantages of using PlayMo, describe the event-driven method used by PlayMo and also introduce two enhanced characteristics of the Event Flow Chart with which the events in PlayMo are structured. Interactive digital content by using the PlayMo3D makes easy, simple and effective design for e-learning, e-catalogue, e-marketing/sales, e-prototyping, customer support, etc. Through its application-ready 3D function visualization solution, engineers and designers can rapidly turn a CAD design model into a 3D interactive virtual product, and the effective function prototyping job can be also completed within a minute.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.537-546
• /
• 2011

This paper introduces an automated method for building height recovery through the integration of high-resolution satellite images and digital vector maps. A cross-correlation matching method along the vertical line locus on the Ikonos images was deployed to recover building heights. The rational function models composed of rational polynomial coefficients were utilized to create a stereopair of the epipolar resampled Ikonos images. Building footprints from the digital maps were used for locating the vertical guideline along the building edges. The digital terrain model (DTM) was generated from the contour layer in the digital maps. The terrain height derived from the DTM at each foot of the buildings was used as the starting location for image matching. At a preset incremental value of height along the vertical guidelines derived from vertical line loci, an evaluation process that is based on the cross-correlation matching of the images was carried out to test if the top of the building has reached where maximum correlation occurs. The accuracy of the reconstructed buildings was evaluated by the comparison with manually digitized 3D building data derived from aerial photographs.

• Honam Mathematical Journal
• /
• v.27 no.1
• /
• pp.115-129
• /
• 2005

In this paper, we give a digital graph-theoretical approach of the study of digital images with relation to a simplicial complex. Thus, a digital graph $G_k$ with some k-adjacency in ${\mathbb{Z}}^n$ can be recognized by the simplicial complex spanned by $G_k$. Moreover, we demonstrate that a graphically $(k_0,\;k_1)$-continuous map $f:G_{k_0}{\subset}{\mathbb{Z}}^{n_0}{\rightarrow}G_{k_1}{\subset}{\mathbb{Z}}^{n_1}$ can be converted into the simplicial map $S(f):S(G_{k_0}){\rightarrow}S(G_{k_1})$ with relation to combinatorial topology. Finally, if $G_{k_0}$ is not $(k_0,\;3^{n_0}-1)$-homotopy equivalent to $SC^{n_0,4}_{3^{n_0}-1}$, a graphically $(k_0,\;k_1)$-continuous map (respectively a graphically $(k_0,\;k_1)$-isomorphisim) $f:G_{k_0}{\subset}{\mathbb{Z}}^{n_0}{\rightarrow}G_{k_1}{\subset}{\mathbb{Z}^{n_1}$ induces the group homomorphism (respectively the group isomorphisim) $S(f)_*:{\pi}_1(S(G_{k_0}),\;v_0){\rightarrow}{\pi}_1(S(G_{k_1}),\;f(v_0))$ in algebraic topology.

• Nuclear Engineering and Technology
• /
• v.22 no.1
• /
• pp.45-57
• /
• 1990

A steady-state margin comparison study was performed between analog and digital protection systems. The systems compared are the thermal overpower and overtemperature delta T system of Westinghouse, and Core Protection Calculator System of Combustion Engineering, Inc. No dynamic offset was considered to eliminate the margin differences by different safety analysis methodologies. The result shows that the digital protection system has about 30% more rated power margin than the analog system in protecting against the fuel rod centerline melting. The digital protection system is shown to have almost same margin with the analog protection system in preventing the DNB at EOC (End of Cycle) even if the digital protection system has about 10% more margin at BOC(Beginning of Cycle).

• Asian Journal of Business Environment
• /
• v.11 no.3
• /
• pp.45-51
• /
• 2021

Purpose: The purpose of this study is to reveal that digital Zakat has a role in economic development. Even when disasters hit densely populated areas in big cities, Zakat is distributed quickly and precisely. Research design, data, and methodology: This study uses literature studies with an approach to Islamic economics and sociology of society. The authenticity of this research is about the potential role of digital Zakat which can create sustainable economic development in slums. Result: The results of the study concluded that economic development in slums could be carried out if it collaborated with Zakat institutions which were carried out in several stages. The existence of sustainable solidarity is a serious threat in the effort to achieve development goals and this is very regrettable by almost everyone because it can increase economic inequality. Conclusion: Strategy development is obtained from empirical evidence, the construction of slums that have been carried out by other countries in various parts of the world who also have the same problem. Although statistically not analyzed the relationship between the potential for Zakat and the level of welfare of densely populated settlements, theoretically digital Zakat can be one of the pillars to achieve community welfare through the distribution of Zakat.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.3
• /
• pp.894-907
• /
• 2022

The features extracted by convolutional neural networks are more descriptive of images than traditional features, and their convolutional layers are more suitable for retrieving images than are fully connected layers. The convolutional layer features will consume considerable time and memory if used directly to match an image. Therefore, this paper proposes a feature weighting and region integration method for convolutional layer features to form global feature vectors and subsequently use them for image matching. First, the 3D feature of the last convolutional layer is extracted, and the convolutional feature is subsequently weighted again to highlight the edge information and position information of the image. Next, we integrate several regional eigenvectors that are processed by sliding windows into a global eigenvector. Finally, the initial ranking of the retrieval is obtained by measuring the similarity of the query image and the test image using the cosine distance, and the final mean Average Precision (mAP) is obtained by using the extended query method for rearrangement. We conduct experiments using the Oxford5k and Paris6k datasets and their extended datasets, Paris106k and Oxford105k. These experimental results indicate that the global feature extracted by the new method can better describe an image.

• Educational Technology International
• /
• v.25 no.1
• /
• pp.67-92
• /
• 2024

This study aims to verify the practical effectiveness of learning management system (LMS) by introducing a LMS enhancing digital assessment utilizing automatic item generation in order to strengthen college student's mathematics performance. Teaching assisted with digital assessment in the LMS was applied to college mathematics classes, and the research question is whether or not students in the classes utilizing the LMS perform better than the regular classes. In particular, a calculus course, which is the foundation of important artificial intelligence technology in the future, was utilized in this study. The participants of this study were 248 freshmen in science and engineering who were taking calculus courses at a small to mid-size university. A total of 156 freshmen were selected after applying a propensity score matching method (PSMM), 78 from classes utilizing the LMS and 78 from regular classes without the LMS assisted with the digital assessment. As a result, it was found that there was a statistically significant difference in the math academic growth of students who used the LMS and those who did not. In other words, when LMS was used in calculus, students' academic growth was greater. The results of this study are meaningful in that they observed students' academic growth and confirmed that LMS enables a positive role in students' academic growth. In addition, if digital assessment is strengthened and LMS that enables individualized learning analysis is introduced and implemented in educational institutions, it is expected to play a major role in strengthening students' academic performance.