• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.692-695
• /
• 2004

Fabrication of photosensitive carbon nanotubes paste and its post-treatment has been developed for high resolution with good electron emission uniformity. We report novel post-treatment techniques including rubber-rolling and multiple field emission cycling from which we could improve the field emission properties of printed carbon nanotubes. These techniques would be easily applicable to large area field emission display using paste of carbon nanotubes

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.343-346
• /
• 2003

High Luminance PDPs have been developed using high efficient electrode structure, discharge gas and fishbone type barrier ribs. New phosphors for the good picture quality were developed. Also, New manufacturing processes such as CPBB were applied in order to reduce processing steps. High Luminance of 1,000 $cd/m^2$ was obtained in the series of 42 inch, 50 inch and 60 inch PDPs.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.05a
• /
• pp.256-259
• /
• 2000

A new digital redesign method which can construct a digital controller for multiple linear systems is developed. The proposed method utilized the recently developed LMI theory to obtain a single digital controller which provide good state matching properties with multiple linear systems. A numerical example is provided to evaluate the feasibility of the proposed approach.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2193-2195
• /
• 2001

This paper proposes test strategy detecting the faulted digital device or the faulted digital circuit on the digital circuit board using signature analysis technique based on the polynoimal division theory. SSA(serial Signature Analysis) identifies the faults by comparing the reminder from good device and reminder from the tested device, which reminder is obtained by enforcing the data stream outputed from output pins of tested device on LFSR(Linear Feedback Shift Resister) representing the characteristic equation.

• Archives of Reconstructive Microsurgery
• /
• v.18 no.2
• /
• pp.79-83
• /
• 2009

Purpose: Avulsion injuries of digits have been presented for a long time as complex management problems. Despite of microsurgical advances, it is difficult to achieve good functional results and their management remains somewhat controversial. However, in a finger there are three transverse digital palmar arches. The middle and distal transverse digital palmar arches are consistently large(almost 1 mm) and may be used for arterial vessel repairs either proximally or distally, depending on the length and direction needed. 39-year-old man presented with avulsion amputation of the ulnar three digits, was operated using only arterial anastomosis with rerouting the transverse digital palmar arches. Methods: Replantation was performed using the artery-only technique. Because the digital arteries had been damaged, we did that the transverse digital palmar arches were transposed in an inverted Y to I configuration and were lengthened with rerouting them for the purpose of direct anastomosis of the digital artery. Venous drainage was provided by an external bleeding method with partial nail excision and external heparin irrigation. Results: The authors conclude that complete avulsion amputations with only soft tissue at the distal to insertion of the flexor digitorum superficialis tendon were salvageable with acceptable functional results. All three fingers survived. Conclusion: With technical advancements, the transverse digital palmar arches play an important role for finger amputation. Three digital palmar arches give us additional treatment option for the finger amputation. In this case, replantation with only-arterial anastomosis was successful and we obtained good aesthetic and functional outcome.

• Journal of Korea Multimedia Society
• /
• v.9 no.4
• /
• pp.377-387
• /
• 2006

Digital documents takes place of paper (off-line) documents, because of the advantages of digital (on-line) documents: supply of information using dynamic contents and good to communize. However, users prefer paper documents to digital documents with the advantages of paper documents: inexpensive, handy to carry, and good to read. Therefore, for providing advantages of digital documents to users who prefer paper documents, many laboratories study about methods which augment digital documents to paper documents. In this paper, we propose the Hybrid Documents Authoring Tool (HDAT), which can insert, delete, and modify on-line information to the off-line. The proposed system is a unified authoring tool for reading and writing of on-line information. And we provide the most natural environment to users using computer vision technology without additional devices such as markers or patterns to retrieve documents. As shown by experimental results, we make sure that our proposed system has high usability and good efficiency on various environments through we measure the low-level of system requirement.

• Physical Therapy Korea
• /
• v.15 no.3
• /
• pp.62-69
• /
• 2008

The purpose of this study was to measure intrarater and interrater reliability of a portable digital pressure algometer. Fifty healthy subjects were recruited for this study. Pressure pain thresholds of splenius capitis, levator scapular, and upper trapezius muscles were measured using by FPK algometer and portable digital pressure algometer. Three trials were done on each subject by two examiners. Intraclass correlation coefficients (ICCs) were used to determine the reliability of each measure. The intrarater reliability of the FPK algometer was good and excellent (ICC .63~.79) and the interrater reliability was poor and good (ICC .15~.57). The intrarater reliability of a portable digital pressure algometer was excellent (ICC .75~.86) and the interrater reliability was poor and good (ICC .35~.61). This result suggests that the intrarater reliability and interrater reliability of a portable digital pressure algometer were better than an FPK algometer.

• Journal of Korea Technology Innovation Society
• /
• v.8 no.spc1
• /
• pp.323-336
• /
• 2005

Digital content industry is growing rapidly because of the property of high-speed networking and greater demand for digital fulltext-image. However, we know the fact that it is many difficulty in production and supply for good quality of content. Hereupon, we suggest digital fulltext-image service framework to protect copyright. More concretely, we propose integrated model and reference model to securely serve digital fulltext-image by recompositing core objects and reconstructing the value-chain structure of digital content industry to framework including the process(from its production (creators or copyrighters) to consumption (users or consumers)). Also, we construct the digital fulltext- image service system based on reference model and reconstruct its interface that occurs between core subjects.

• Archives of Reconstructive Microsurgery
• /
• v.22 no.2
• /
• pp.82-85
• /
• 2013

If the replantation on the original position is not possible, the amputated tissue of a hand may be used as a donor for recovering hand functions at other positions. This procedure is termed 'heterodigital replantation'. An 63-year-old male patient who was in press machine accident came to Our Hospital. He had large dorsal soft-tissue defects ($5{\times}3cm$) on his left long finger and complete amputation on his left index finger through the proximal interpharyngeal joint. Replantation was not indicated because crushing injury of index finger was severe. So we decided to use index finger soft tissue as heterodigital free flap for the coverage of the long finger defect. The ulnar digital artery and dorsal subcutaneous vein of the free flap were anastomosed with the radial digital artery and dorsal subcutaneous vein of the long finger. The heterodigital free flap provided satisfactory apperance and functional capability of the long finger. The best way to treat amputation is replantation. But sometimes surgeon confront severely crushed or multi-segmental injured amputee which is not possible to replant. In this situation, reconstructive surgeons should consider heterodigital free flap from amputee as an option.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.13 no.4
• /
• pp.81-90
• /
• 2017

This paper presents a smart seat for correction of driver posture while driving. We introduce good postures with seat height, seat angle, head height, back of knees, distances of foot pedals, tilt of seat, etc. There have been some studies on correction of good posture while driving, effects of driving environment on driver's posture, sitting strategies based on seating pressure distribution, estimation of driver's standard postures, and others. However, there are a few studies on guide of good postures while driving for problem of driver's posture using machine leaning. Therefore, we suggest a smart seat for correction of driver's posture based on machine leaning, 1) developed the system to get postures by 10 piezoelectric effect element, 2) collect piezoelectric values from 37 drivers and 28 types of cars, 3) suggest 4 types of good postures while driving, 4) analyze test postures by kNN. As the results, we can guide good postures for bad or problems of postures while driving.