• Journal of Environmental Science International
• /
• v.12 no.10
• /
• pp.1025-1032
• /
• 2003

The purpose of this study is to analyze the characteristics of the urban landscape by CG(Computer Graphic) pictures and visibility analysis. In this study, the CG picture was created by using zoning data and DEM(Digital Elevation Model) on Chunchon city. The landscape type was classified into three by cluster analysis using the area rate of the element which constitutes CG picture. Visible analysis used DEM as fundamental data, and was performed by using GIS(Geographic Information System). And the frequency seen on viewshed was classified into five grades. The result of this study are as follows: 1. The area rate of the element which constitutes CG picture was high development restriction zone(43%) in type 1, green land area(39%) in type 2, and city area(24%) in type 3. 2. In the analysis results of GIS visibility analysis, it turns out that Euiam lake is important area on the landscape in all types. 3. The land use of high frequency seen on viewshed was water area, residential area in type 1, development restriction area, park area in type 2, and development restriction zone, water area in type 3.

• Journal of Digital Convergence
• /
• v.13 no.9
• /
• pp.445-452
• /
• 2015

The purpose of this study was to examine the mediating effect of moral elevation on the relationship between character strengths(humanity), self-control and altruistic behavior in the times of convergence. 647 college students in Cheongju were sampled. Four measurement instruments were employed; a Character Strengths(Humanity) Scale, Self-Control Scale, Moral Elevation Scale, and Altruistic Behavior Scale. The Collected data were analyzed with SPSS program and Structural Equation Modeling(SEM). Fitness of the final model were CFI=.937, TLI=.917, RMSEA=.077. The results of this study were as follows: First, there were significant positive correlations among character strengths(humanity), self-control, and altruistic behavior. Second, according to the structural equation modeling, the results showed that moral elevation had a mediating effect in relationship between college student's character strengths(humanity), self-control and altruistic behavior.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.6
• /
• pp.120-128
• /
• 2017

The aim of this study is to analyze the accuracy of SRTM Ver 3.0 and ASTER GDEM Ver 2 over Korea. To enable this, accuracy analysis was performed by using precise DEM which was made with multiple aerial image matching and national base map benchmark. The result of this study identified both SRTM and ASTER have different features. The height of the SRTM was found to be higher (3.8 m on average) at lower elevation and lower (8.4 m on average) at higher elevation. In contrast, the ASTER was found to be lower than the actual height at both lower and higher elevation (2.92 m, 4.51 m on average). The cause of this height bias according to the elevation is due to the differences in data acquisition and processing methods of DEM. It was identified however that both SRTM and ASTER were within allowable limits of error. In addition, RMSE of the SRTM was smaller than the ASTER in comparison to benchmark, and also the bias trend both at higher and lower terrain were similar to the precise DEM which was made with multiple aerial image matching. Therefore, the reliability of SRTM can be considered to be higher.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.3 s.33
• /
• pp.3-13
• /
• 2005

This study aims to establish the quality management method for spatial data construction process. Total 17 regulations related to spatial database construction and major aerial survey firms were analyzed in terms of working process, equipments, accuracy of results. It is standardized the process of making new digital maps using aerial photography, revising existing digital maps, producing digital elevation models and developing imagery maps. Quality checking factors for spatial data construction process are also established.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.1
• /
• pp.49-60
• /
• 2004

Northern Gyeonggi Province(NGP), consisting of 3 counties, is the northernmost region in South Korea adjacent to the de-militarized zone with North Korea. To supplement insufficient spatial coverage of official climate data and climate atlases based on those data, high-resolution digital climate models(DCM) were prepared to support weather- related activities of residents in NGP Monthly climate data from 51 synoptic stations across both North and South Korea were collected for 1981-2000. A digital elevation model(DEM) for this region with 30m cell spacing was used with the climate data for spatially interpolating daily maximum and minimum temperatures, solar irradiance, and precipitation based on relevant topoclimatological models. For daily minimum temperature, a spatial interpolation scheme accommodating the potential influences of cold air accumulation and the temperature inversion was used. For daily maximum temperature estimation, a spatial interpolation model loaded with the overheating index was used. Daily solar irradiances over sloping surfaces were estimated from nearby synoptic station data weighted by potential relative radiation, which is the hourly sum of relative solar intensity. Precipitation was assumed to increase with the difference between virtual terrain elevation and the DEM multiplied by an observed rate. Validations were carried out by installing an observation network specifically for making comparisons with the spatially estimated temperature pattern. Freezing risk in January was estimated for major fruit tree species based on the DCMs under the recurrence intervals of 10, 30, and 100 years, respectively. Frost risks at bud-burst and blossom of tree flowers were also estimated for the same resolution as the DCMs.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_3
• /
• pp.1013-1025
• /
• 2020

Unmanned Aerial Vehicle (UAV) platform is being widely used in disaster monitoring and smart city, having the advantage of being able to quickly acquire images in small areas at a low cost. Ground Control Points (GCPs) for positioning UAV images are essential to acquire cm-level accuracy when producing UAV-based orthoimages and Digital Surface Model (DSM). However, the on-site acquisition of GCPs takes considerable manpower and time. This research aims to provide an efficient and accurate way to replace the on-site GNSS surveying with three different sources of geospatial data. The three geospatial data used in this study is as follows; 1) 25 cm aerial orthoimages, and Digital Elevation Model (DEM) based on 1:1000 digital topographic map, 2) point cloud data acquired by Mobile Mapping System (MMS), and 3) hybrid point cloud data created by merging MMS data with UAV data. For each dataset a three-dimensional positional accuracy analysis of UAV-based orthoimage and DSM was performed by comparing differences in three-dimensional coordinates of independent check point obtained with those of the RTK-GNSS survey. The result shows the third case, in which MMS data and UAV data combined, to be the most accurate, showing an RMSE accuracy of 8.9 cm in horizontal and 24.5 cm in vertical, respectively. In addition, it has been shown that the distribution of geospatial GCPs has more sensitive on the vertical accuracy than on horizontal accuracy.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.55-64
• /
• 2005

This study demonstrates the experiment based on digital photogrammetric processing for acquiring data related to slope monitoring. To apply dose-range digital photos for monitoring road rock slopes, digital elevation models and digital orthophotos were generated and 3D modelling was conducted for the visualization on a digital photogrammetric workstation. These digital photogrammetric products can be utilized as objective and scientific data not only for surveying and analyzing the shape and characteristics of the slopes but also for extracting various engineering data for building the database of the slopes and making the safety diagnosis of the slopes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.2
• /
• pp.153-158
• /
• 2006

A new High Resolution Geometry or HRG imaging instrument is developed by CNES to be carried on-board SPOT 5. The HRG instrument offers a higher ground resolution than that of the HRV/HRVIR on SPOT 1 - 4 satellites. The field width of HRG is 60 km, same as SPOT constellation. With two HRG instruments, a maximum swath of 120 km at 5 m resolution can be achieved. The generation of Digital Elevation Models (DEMs) from satellite stereo images scores over conventional methods of DEM generation using topographic maps and aerial photographs. This global availability of satellite images allows for quicker data processing for an equivalent area. In this study, a HRG stereo images of SPOT 5 over JECHEON has been used with Leica Photogrammetry Suite OrthoBASE Pro tool for the creation of a digital elevation model (DEM). The extracted DEM was compared to the reference DEM obtained from the contours of digital topographic map.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.189-197
• /
• 1996

Digital Elevation Model, Ortho-image, and 3-D positional data of terrain features are indispensable elements for producing 3-D image information. In this research, digital pbotogrammetric studies were conducted to measure the 3-D positional data on high performance computer systems in order to replace analytical stereo-plotter-oriented tasks with those of digital workstations. Especially, technical approaches to measure these data on stereo workstation were developed and then the results were applied on SPOT satellite images. As the result of this study, the possibilities of the proposed technologies were tested and proved based on the ap-plication of the digital photogrammetric processes to extract 3-D ground coordinates of terrain features from digital satellite imagery.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.343-350
• /
• 2021

Unmanned aerial vehicles(UAV) photogrammetry provides a cost-effective option for collecting high-resolution 3D point clouds compared with UAV LiDAR and aerial photogrammetry. The main objectives of this study were to (1) validate the accuracy of 3D site model generated, and (2) determine the differences between Digital Elevation Model(DEM) and Digital Surface Model(DSM). In this study, DEM and DSM were shown to have varying degree of accuracy from observed data. The results indicated that the model predictions were considered tend to over- and under-estimated. The range of RMSE of DSM predicted was from 8.2 and 21.3 when compared with the observation. In addition, RMSE values were ranged from 10.2 and 25.8 to compare between DEM predicted and field data. The predict values resulting from the DSM were in agreement with the observed data compared to DEM calculation. In other words, it was determined that the DSM was a better suitable model than DEM. There is potential for enabling automated topography evaluation of the prior-harvest areas by using UAV technology.