• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.22-27
• /
• 1998

A grid-based soil moisture routing model(GRISMORM) was developed to assess the information of groundwater recharge using spatial data such as Landsat TM and digital elevation model etc.. The model predicts the hydrologic components, that is, surface runoff, subsurface runoff, baseflow and evapotranspiration at each grid elements by grid-based water balance computation.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.340-343
• /
• 2001

The main objective of this study is to simulate design flood discharge of the Sungjoo basin. GIS and HEC-HMS were used in this study. GIS technique can extract various hydrological factors from D.E.M(Digital Elevation Model) and the parameters extracted from each watershed were applied to the HEC-HMS. As a result of this study, GIS technique is useful to tile extraction of watershed characteristics factors and HEC-HMS is successful in tile simulation of design flood discharge.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.131-134
• /
• 2006

LiDAR(Light Detection And Ranging) 데이터 처리에 있어서 건물, 자동차, 수목 등의 비지면 객체와 지면을 분류하는 필터링 과정은 DEM(Digital Elevation Model) 구축을 위해서 중요하다. 도심지역의 건물추출 등의 필터링에 관한 연구는 활발히 진행되고 있으나 국내의 경우 수목에 대한 필터링은 비교적 연구가 미흡하였다. 따라서 이 연구에서는 기존에 다루어진 몇 가지 알고리즘을 분석하고 산림지역에 활용해 봄으로써 각 필터링에 관한 장단점을 비교하였다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.423-427
• /
• 2010

현재 GPS/INS 운영 방법은 일정한 범위 내에 GPS 지상기준국을 설치하도록 되어있다. 그러나 촬영지역이 넓을 경우나 작업의 우선순위 등에 따라 지상기준국의 운영이 곤란한 상황이 발생할 수 있으며, 작업자의 실수, 수신기의 오류 등으로 지상기준국을 항상 안정적으로 운영하기 어렵다. 이에 본 연구에서는 국토지리정보원의 GPS 상시관측소를 활용하여 항공레이저측량 원시자료를 구축하고, 지상 기준국을 사용한 결과와의 비교를 통해 기준국이 항공레이저측량 결과에 미치는 영향을 분석하고자하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.21-35
• /
• 2009

KOMPSAT-2 is the seventh high-resolution image satellite in the world that provides both 1m-grade panchromatic images of the GSD and 4m-grade multispectral images of the GSD. It's anticipated to be used across many different areas including mapping, territory monitoring and environmental watch. However, due to the complexity and security concern involved with the use of the MSC, the use of KOMPSAT-2 images are limited in terms of geometric images, such as satellite orbits and detailed mapping information. Therefore, this study aims to produce DEM and orthoimage by using the stereo images of KOMPSAT-2, and to explore the applicability of geo-spatial information with KOMPSAT -2. Orientation interpretations were essential for the production of DEM and orthoimage using KOMPSAT-2 images. In the study, they are performed by utilizing both RPC and GCP. In this study, the orientation interpretations are followed by the generation of DEM and orthoimage, and the analysis of their accuracy based on a 1:5,000 digital map. The accuracy analysis of DEM is performed and the results indicate that their altitudes are, in general, higher than those obtained from the digital map. The altitude discrepancies on plains, hills and mountains are calculated as 1.8m, 7.2m, and 11.9m, respectively. In this study, the mean differences between horizontal position between the orthoimage data and the digital map data are found to be ${\pm}3.081m$, which is in the range of ${\pm}3.5m$, within the permitted limit of a 1:5,000 digital map. KOMPSAT-2 images are used to produce DEM and orthoimage in this research. The results suggest that DEM can be adequately used to produce digital maps under 1:5,000 scale.

• Korean Journal of Remote Sensing
• /
• v.33 no.3
• /
• pp.313-324
• /
• 2017

A lava tube is one of the hot issues of lunar science because it is regarded as a good candidate place for setting a lunar base. Recently much effort has been made to find lunar lava tubes. However, preceding works mainly made use of high-resolution lunar surface image data in conjunction with geomorphological consideration to present some lava tube candidates. Yet, those candidates stay no more than indirect indications. We propose a new data analysis technique of High Frequency (HF) radar observation data to find lunar lava tubes of which location depth is smaller than the range resolution of the radar pulse. Such shallow target echoes cannot be resolved from surface echoes, which presents the different location of the lunar surface compared to that of real lunar surface. The proposed technique instead finds the surface range (distance from LRS to the reflector of the most intense signal) anomaly which occurs as a result of the low range resolution of LRS pulse. We applied this technique to the surface range of Kaguya Lunar Radar Sounder (LRS) data. The surface range was deduced to make LRS surface elevation which was compared with the average surface elevation of Kaguya Digital Terrain Model (DTM). An anomalous discrepancy of the surface elevation was found in the Rima Galilaei area, which suggests the existence of a shallow lava tube.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.419-424
• /
• 2009

This paper show about the possibility of practical application after building VR(virtual reality) data based on Airborne LiDAR data which determines complicated topography quickly for the 3D-GIS construction. In this paper, we collected Airborne LiDAR data, digital map, serial photo and a basic design. The results are expected some effective determination by 3D-GIS construction based on LiDAR data. Hereafter, because the research will be able to be given quickly topography information on ubiquitous environment the field of construction and GIS will be able to be helped.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.933-938
• /
• 2014

The combined method utilizing airborne LiDAR and GIS data is suggested to extract 3-dimensional hybrid city model including roads and buildings. Combining the two types of data is more efficient to estimate the elevations of various types of roads and buildings than using either LiDAR or GIS data only. This method is particularly useful to model the overlapped roads around the so called spaghetti junction. The preliminary model is constructed from the LiDAR data, which can give wrong information around the overlapped parts. And then, the erratic vertex points are detected by imposing maximum vertical grade allowable on the elevated roads. For the purpose of efficiency, the erratic vertex points are corrected through linear interpolation method. To avoid the erratic treatment of the LiDAR data on the facades of buildings 2 meter inner-buffer zone is proposed to efficiently estimate the height of a building. It is validated by the mean value (=5.1%) of differences between estimated elevations on 2 m inner buffer zone and randomly observed building elevations.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.153-155
• /
• 2003

Laser scanning has become a viable technique for the collection of a large amount of accurate 3D point data densely distributed on the scanned object surface. The inherent 3D nature of the sub-randomly distributed point cloud provides abundant spatial information. To explore valuable spatial information from laser scanned data becomes an active research topic, for instance extracting digital elevation model, building models, and vegetation volumes. The sub-randomly distributed point cloud should be segmented and classified before the extraction of spatial information. This paper investigates some exist segmentation methods, and then proposes an octree-based split-and-merge segmentation method to divide lidar data into clusters belonging to 3D planes. Therefore, the classification of lidar data can be performed based on the derived attributes of extracted 3D planes. The test results of both ground and airborne lidar data show the potential of applying this method to extract spatial features from lidar data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.1
• /
• pp.169-178
• /
• 2010

The main purpose of this study is to evaluate the feasibility and the accuracy of ASTER DEM and SRTM DEM covering 99% of the earth surface using large-scale Digital Topographic Map in mountainous area(Sokcho), mixed area(Jinan, mountainous area and even land area) and even land area(Anyang). We made DEM using contour lines of 1:5,000 Digital Topographic Map of study area and also acquired ASTER DEM and SRTM DEM of their corresponding area. In order to verify accuracy of DEM, this study compared ASTER DEM and SRTM DEM data using 15m resolution DEM generated from contour lines of Digital Topographic Map as basis for each study area. To evaluate the accuracy of ASTER and SRTM DEM data, statistical such as RMSE and correlation were calculated and histogram and scatter plot were drawn. The analysis result shows that, both ASTER DEM and SRTM DEM have high accuracy but in aspects of future availability, ASTER DEM covering larger areas bas relatively more potential than SRTM data.