• Applied Microscopy
• /
• v.31 no.2
• /
• pp.185-197
• /
• 2001

Human gastric adenocarcinomas are fixated with low energy of microwave (LEM) to study fixation effects in level of ultrastructure and antigenicity of the cancer. For the Ag-Ab reactions , the LEM fixated sdenocarcinomas are incorporated with monoclonal mouse anti-human p53 (IgG2b, kappa) and rabbit anti human cerbB-2. The retrieval of antigenicity are easily recognizable in the LEM fixated sections compared with that of frozen sections which show often diffused colour reactions. And the LEM fixation methods have preserved ultrastructures of the adenocarcinoma, but it was often difficult to maintain constancy in fixation effects. For the constancy, LEM was coupled with low concentration of chemical fixatives, such as glutaraldehyde (<1%) and $OsO_4$ (<0.5%). The results were acceptable, but there are tendencies that the adenocarcinoma requisitioned rather weak microwave energy to come into the optimal fixation effects. Therefore , cultured HeLa cells were fixated with lower energy of microwave than that used to the adenocarcinoma. The ultrastructures of the single HeLa cell have been preserved. The results may imply that a different energy levels of microwave are requisitioned in accordance with kinds of cells and tissues for the optimal fixation effects. It is reported and discussed that the fixation methods of LEM used in this work could be applied routinely to conceal a insufficient diffusion rate of chemical fixatives into some kinds of cancer without compromising the ultrastructures as well as to improve antigenic quality of frozen sections.

• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.619-625
• /
• 1995

Polycrystalline CdTe thin film has been studied for photovoltaic application due to the 1.45 eV band gap energy ideal for solar energy conversion and high absorption coefficient. The formation of low resistance contact to p-CdTe is difficult because of large work function(>5.5eV). Common methods for ohmic contact to p-CdTe are to form a p+ region under the contact by in-diffusion of contact material to reduce the barrier height and modify a p-CdTe surface layer using chemical treatment. In this study, the surface chemical treatment of p CdTe was carried out by H$\_$3/PO$\_$4/+HNO$\_$3/ or K$\_$2/Cr$\_$2/O$\_$7/+H$\_$2/SO$\_$4/ solution to provide a Te-rich surface. And various thin film contact materials such as Cu, Au, and Cu/Au were deposited by E-beam evaporation to form ohmic contact to p-CdTe. After the metallization, post annealing was performed by oven heat treatment at 150.deg. C or by RTA(Rapid Thermal Annealing) at 250-350.deg. C. Surface chemical treatments of p-CdTe thin film improved metal/p-CdTe interface properties and post heat treatment resulted in low contact resistivity to p-CdTe.Of the various contact metal, Cu/Au and Cu show low contact resistance after oven and RTA post-heat treatments, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.11
• /
• pp.771-780
• /
• 2001

It is indispensable to use the process and device simulation tool in order to analyze accurately the electrical characteristics of ULSI CMOS devices, in addition to developing and manufacturing those devices. The 3D Monte Carlo (MC) simulation result is not efficient for large-area application because of the lack of simulation particles. In this paper is reported a new efficient simulation strategy for 3D MC ion implantation into large-area application using the 3D MC code of TRICSI(TRansport Ions into Crystal Silicon). The strategy is related to our newly proposed split-trajectory method and ion-splitting method(ion-shadowing approach) for 3D large-area application in order to increase the simulation ions, not to sacrifice the simulation accuracy for defects and implanted ions. In addition to our proposed methods, we have developed the cell based 3D interpolation algorithm to feed the 3D MC simulation result into the device simulator and not to diverge the solution of continuous diffusion equations for diffusion and RTA(rapid thermal annealing) after ion implantation. We found that our proposed simulation strategy is very computationally efficient. The increased number of simulation ions is about more than 10 times and the increase of simulation time is not twice compared to the split-trajectory method only.

• Journal of Environmental Health Sciences
• /
• v.39 no.4
• /
• pp.360-368
• /
• 2013

Objectives: Phthalates are used in a large variety of products including as coatings of pharmaceutical tablets, film formers, stabilizers, dispersants, emulsifying agents, and suspending agents. They have been the subject of great public concern in recent years. The extensive uses of this material have attracted attention and issues regarding its safety have been raised. Methods: In this study, three types of phthalate skin permeation were studied using matrixes such as ointments, creams and lotions in vitro. The absorption of phthalate diesters [Dimethyl phthalate (DMP), Di-n-propyl phthalate (DPP) and Di-n-pentyl phthalate (DNPP)] using film former has been measured in vitro through rat skin. Epidermal membranes were set up in Franz diffusion cells and their permeability to PBS measured in order to establish the integrity of the skin before the phthalates were applied to the epidermal surface. Results: Absorption rates for each phthalate ester were determined and permeability assessment made to quantify any irreversible alterations in barrier function due to contact with the esters. Types of phthalate in vitro experimental results quickly appeared in the following order DMP > DPP ${\geq}$ DNPP. Conclusions: In the experimental results, lotion> cream> ointment, and the permeation rate of lotion with a great amount of moisture was the fastest. Skin permeation rate is generally influenced by the chemical characteristics of a given chemical, such as molecular weight and lipophilicity. As the esters became more lipophilic and less hydrophilic, the rate of absorption decreased.

• The Journal of Korean Physical Therapy
• /
• v.18 no.1
• /
• pp.75-82
• /
• 2006

Purpose: This study conducted the following experiment to examine transdermal permeation effects or 500 KHz ultrasound with lidocaine HCl. Methods; First, to experiment skin permeation enhancement effects of 500 KHz ultrasound frequency, it produced apparatus and transducer of 500 KHz ultrasound and Franz diffusion cell for skim permenation experiment suitable to purposes of the experiment. Transdermal permeation experiment applied Lidocaine HCL gel to skin of hairless mouse depending on ultrasound frequency and duty cycle and analyzed permeation ratio with HPLC. Results: As a result of fixing lidocaine HCl gel at the same intensity with pulsed mode and continuous mode and comparing transdermal permeation ratio by frequency, transdermal permeation ratio was increased at 500 KHz ultrasound and remarkably increased at continuous ultrasound. It was found that 1 MHz and 500 KHz ultrasound in transdermal permeation experiment enhanced transdermal permeation of lidocaine HCl. In particular, transdermal permeation of 500 KHz using lidocaine HCl gel was highest. Conclusion: However, researches considering various frequencies, intensities and application hours in low frequency areas including 500 KHz ultrasound are needed to increase deep permeation or drugs.

• The Journal of Internal Korean Medicine
• /
• v.34 no.3
• /
• pp.278-288
• /
• 2013

Objectives : Methicillin-resistant Staphylococcus aureus (MRSA) has a cephalosporin and beta-lactam antibiotic-resistant strains. MRSA is one of the major pathogens causing hospital infection and the isolation ratio of MRSA has gradually increased. Consequently, increased resistance to antibiotics is causing serious problems in the world. Therefore, there is a need to develop alternative antimicrobial drugs for the treatment of infectious diseases. Methods : The antibacterial activities of Ipyo-san were evaluated against 2 strains of MRSA and 1 standard Methicillin-susceptible staphylococcus aureus (MSSA) strain by using the disc diffusion method, minimal inhibitory concentrations (MIC) assay, colorimetric assay using MTT test, checkerboard dilution test and time-kill assay performed under dark. Results : The MIC of Ipyo-san water extract against S. aureus strains ranged from 1000 to $2,000{\mu}g/ml$, so we confirmed that it had a strong antibacterial effect. Also, the combinations of Ipyo-san water extract and conventional antibiotics exhibited improved inhibition of MRSA with synergy effect. We suggest that Ipyo-san water extract against MRSA has antibacterial activity so it has potential as alternatives to antibiotic agents. For the combination test, we used Triton X-100 (TX) and DCCD for measurement of membrane permeability and inhibitor of ATPase. As a result, antimicrobial activity of Ipyo-san water extract was affected by the cell membrane. Conclusions : We suggest that the Ipyo-san water extract lead the treatment of bacterial infection to solve the resistance and remaining side-effect problems that are the major weak points of traditional antibiotics.

• Korean Journal of Veterinary Research
• /
• v.47 no.1
• /
• pp.33-41
• /
• 2007

Streptococcus spp. comprising Streptococcus (S.) uberis S. dysgalactiae strains is major causeof bovine mastitis from particularly well-managed or low somatic cell count herds that have successfullycontrolled contagious pathogens. In this study, antimicrobial susceptibility and genetic characteristics of S.uberis isolated from clinical or subclinical mastitis milk at 2003 were investigated. Eighty seven isolatesof Streptococus spp. were identified by the conventional biochemical methods. The antimicrobialsusceptibility by disk diffusion method was determined for 46 S. uberis, 11 S. bovis, 10 S. oralis, 6 S.uberis and 14 other Streptococcus spp.. Overall, the tested strains were susceptible to tetracycline (11.5%),amikacin (14.9%), streptomycin (16.1%), neomycin (26.4%), kanamycin (35.6%), gentamicin (65.2%),oxacillin (70.1%), ampicillin (75.9%), chloramphenicol (78.2%), and cephalothin (97.7%). Additionally, S.uberis strains were susceptible to pencillin G (97.8%), but resistant to erythromycin (76.0%) by minimalinhibitory concentration test. The multiple-drug resistance rate of isolated bacteria to 4 more thanamplification fingerprinting patterns amplifed with primer 8.6d showed that 3 to 8 number of distinguishableDNA fragments ranged from 180 bp to 1,20 bp. Thirty seven isolates of S. uberis strains were subtypedinto 8 distinct patterns. Each subtype revealed a typical pattern of antimicrobial susceptibilities. Thesefindings demonstrate that S. uberis isolates were mastitis pathogens of diverse serotypes, and oftenencountered the diverse resistant patterns.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.1
• /
• pp.27-32
• /
• 2000

Various release test methods have been applied for the evaluation of nicotine release in vitro from commercial patches. However, whether and how the release data reflect the permeation of nicotine across the skin, is not fully elucidated. To predict in vivo bioavailability from in vitro release tests, correlation between in vitro release and in vitro skin permeation was assessed in the present study. Release of nicotine from three commercial patches was measured for 24 hours under nine experimental conditions which were classified depending on the apparatus (i.e., paddle over disk, cylinder and reciprocating holder) and dissolution media (i.e., phosphate buffer pH 7.4, water and the 1 % phosphoric acid pH 1.5). In vitro permeation of nicotine from the patches across the human cadaver skin was also measured using a diffusion cell. The release of nicotine was better explained by the Higuchi's equation rather than by the first order rate equation. Correlation between the release rate and the in vitro skin permeation differed among the patches. However, in general, the cylinder method, in which water is used as a dissolution medium, showed the highest correlation among the nine release test conditions.

• Korean Journal of Materials Research
• /
• v.20 no.8
• /
• pp.434-438
• /
• 2010

The selenization process has been a promising method for low-cost and large-scale production of high quality CIGS film. However, there is the problem that most Ga in the CIGS film segregates near the Mo back contact. So the solar cell behaves like a $CuInSe_2$ and lacks the increased open-circuit voltage. In this study we investigated the Ga distribution in CIGS films by using the $Ga_2Se_3$ layer. The $Ga_2Se_3$ layer was applied on the Cu-In-Ga metal layer to increase Ga content at the surface of CIGS films and to restrict Ga diffusion to the CIGS/Mo interface with Ga and Se bonding. The layer made by thermal evaporation was showed to an amorphous $Ga_2Se_3$ layer in the result of AES depth profile, XPS and XRD measurement. As the thickness of $Ga_2Se_3$ layer increased, a small-grained CIGS film was developed and phase seperation was showed using SEM and XRD respectively. Ga distributions in CIGS films were investigated by means of AES depth profile. As a result, the [Ga]/[In+Ga] ratio was 0.2 at the surface and 0.5 near the CIGS/Mo interface when the $Ga_2Se_3$ thickness was 220 nm, suggesting that the $Ga_2Se_3$ layer on the top of metal layer is one of the possible methods for Ga redistribution and open circuit voltage increase.

• Korean journal of food and cookery science
• /
• v.33 no.3
• /
• pp.256-263
• /
• 2017

Purpose: Essential oils are secondary metabolites of herbs and have antibacterial activities against foodborne pathogens. However, their applications for food protection are limited due to the hydrophobic and volatile natures of essential oils. Methods: In this study, essential oil nanoemulsions of rosemary and lavender were formulated with non-ionic surfactant Tween 80 and water using ultrasonic emulsification, and their antibacterial effects were determined. Results: The antibacterial activities of nanoemulsions were evaluated against 12 strains of 10 bacterial species, and significant antibacterial effects were observed against four Gram-positive and four Gram-negative bacteria but not against Streptococcus mutans and Shigella sonnei. In the disc diffusion test, the diameter of the inhibition zone proportionally increased with the concentration of nanoemulsions. Using cell turbidity measurement, minimum bactericidal concentration (MBC) of the nanoemulsions, which is the lowest concentration reducing viability of the initial bacterial inoculum by ${\geq}99.9%$, was significantly higher than the minimum inhibitory concentration (MIC) of the nanoemulsions. The largest bactericidal effects of lavender and rosemary essential oil nanoemulsions were observed against S. enterica and S. aureus, respectively. Conclusion: Nanoemulsion technique could improve antibacterial activity of essential oil nanoemulsions by increasing the solubility and stability of essential oils. Our findings shed light on the potential use of essential oil nanoemulsions as an alternative to chemical sanitizers in food protection.