• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 춘계학술대회 논문집
• /
• pp.33-34
• /
• 1988

태양전지의 특성분석에 관한 최근의 동향을 고찰해 보기로 한단. 첫째, $CuInSe_2$와 비정질 실리콘 등의 광전압 용도의 태양전지의 재료선택에 관한 일반 규칙을 살펴 보고, 둘째, AM1 조건에서 보다 정확한 전지효율의 측정방법을 조사하며, 셋째, 태양전지의 중요 특성분석방법들을 소개 설명한다. 특히 생산 품질관리의 규모로 까지 확대적용이 가능한 다음과 같은 태양전지의 특성분석방법들의 장치개선 및 컴퓨터제어를 고찰하기로 한다. 전지효율 및 기타 전지특성을 위한 전류-전압 성질 측정장치, 양자효율을 위한 분광반응장치, 소수 이동자의 확산거리를 위한 표면광전압장치, 또한 에너지갭 내의 양자상태밀도를 위한 광열굴절장치 등이다.

• 설비공학논문집
• /
• 제15권3호
• /
• pp.239-245
• /
• 2003

In the nuclear power plant, emergency core coolant system (ECCS) is furnished at reactor coolant system (RCS) in order to cool down high temperature water in case of emergency. However, in this coolant system, thermal stratification phenomenon can occur due to coolant leaking in the check valve. The thermal stratification produces excessive thermal stresses at the pipe wall so as to yield thermal fatigue crack (TFC) accident. In the present study, effects of turbulence penetration on the thermal stratification into T-branches with square cross-section in the modeled ECCS are analysed numerically. $textsc{k}$-$\varepsilon$ model is employed to calculate the Reynolds stresses in momentum equations. Results show that the length and strength of thermal stratification are primarily affected by the leak flow rate of coolant and the Reynolds number of the main flow in the duct. Turbulence penetration into the T-branch of ECCS shows two counteracting effects on the thermal stratification. Heat transport by turbulence penetration from the main duct to leaking flow region may enhance thermal stratification while the turbulent diffusion may weaken it.

• 한국식물병리학회지
• /
• 제14권6호
• /
• pp.625-629
• /
• 1998

Turnip mosaic potyviruses (TuMV) were isolated from Rorippa indica and Armoracia lapathifolia showing mosaic symptoms in field. Identification of the TuMVs were carried out by host reactions of indicator plants, electron micrograph, serological properties and reverse transcription-poly-merase chain reaction (RT-PCR). Both viruses systemically infected Chenopodium quinoa, Nicotiana clevelandii, Brassica rapa, B. campestris subsp. pekinensis, B. juncea and Raphanus sativus, and developed local infection on inoculated leaves of C. quinoa, C. amaranticola, C. album, N. tabacum cv. Xanthi nc and Gomphrena grobosa. However, the viruses did not infect on N. glutinosa, Cucumis sativus and Vigna unguiculata. The filamentous particles, about 720 nm in length, and inclusion bodies were observed from the infected leaf tissues by dipping on electron microscopy. Crude sap of leaf infected with the viruses was reacted positively with an antiserum of TuMV in agar gel double diffusion. For detection of the viruses, RT-PCR was carried out with TuMV--specfic oligonucleotide primer. The RT-PCR products, a 1,092 bp DNA fragment, were obtained from naturally infected leaves of R. indica and A. lapathifolia. In inoculation test to seven cruciferous weeds with TuMV, infection occurred in Arabis glabra, Barbarea orthoceras, Capsella bursa-pastoris, Draba nomorosa var. hebecarpa, Rorippa cantoniensis and Thlaspi arvense.

• 한국물환경학회지
• /
• 제26권1호
• /
• pp.44-51
• /
• 2010

A lab-scale apparatus for turbid water transport control was tested and examined. The channel had a dimension of $100cm{\times}30cm{\times}15cm$ (length${\times}$hight${\times}$width). And the turbidity water was prepared using two types of particles, bentonite and loess. The channel equipped with filamentous mat was operated under various shock load conditions. In the control channel, instantly, turbid water mixed with the clean water inside the channel and turbidity prevails the entire channel. While in the mat-equipped channel, it increases only at the bottom. Overall, the filamentous mat gave capture efficiency of 70~90% compared with the control group. The capture efficiency of turbid particles decreased with increased input turbidity flux. The result of experimental run on how turbid particles are separated in the mat channel shows that settling, filtration and attachment are the main processes. Meanwhile, turbidity was diffused from the channel bottom due to turbidity gradient before and after mat zone. The particle size before mat zone was lightly coarser than that after mat zone.

• 한국의류학회지
• /
• 제8권1호
• /
• pp.39-45
• /
• 1984

The effects of Temperature on the removal of triglyceride were studied with soaps having various chain lengths of alkyl group. Cellophane, polyester film and alkali-treated polyester film were soiled with tripalmitin, tagged with 0" and detergency was evaluated by analysing the tripalmitine on the fabric before and after washing by means of liquid scintillation counting. The results were as following: 1) Triglyceride was completely removed from cellophane in distilled water without surfactant at any temperature, because of the hydrophillic nature of cellulose. The detergency of triglyceride from polyester film fully depended on the state of tripalmitin. The detergency of alkali treated polyester film was better than that of untreated polyester film at lower temperature due to increased hydrophillcity, but worse at higher temperature due to the diffusion of molten tripalmitin into the grooves, formed by alkali treatment. 2) The detergency from polyester film was increased with elevating temperature and after reaching some optimum detergencies, the detergencies were rather decreased with increasing temperature. The temperatures of optimum detergency were shifted to higher with increasing chain length of alkyl group. 3) When the soiled film was baked at $60^{\circ}C$ and $70^{\circ}C$ for 20 min, the detergency vs. temperature was much the same as the case of without-baking. These results indicate that the detergency of triglyceride was largely correlated with the suspending power of surfactants at low temperature and with state of soil and hydrophilicity of substrates with elevating temperature.

• Macromolecular Research
• /
• 제15권2호
• /
• pp.160-166
• /
• 2007

Novel multiblock copolymers, based on segmented sulfonated hydrophilic-hydrophobic blocks, were synthesized and investigated for their application as proton exchange membranes. A series of segmented sulfonated poly(arylene ether sulfone)-b-polyimide multiblock copolymers, with various block lengths, were synthesized via the coupling reaction between the terminal amine moieties on the hydrophilic blocks and naphthalene anhydride functionalized hydrophobic blocks. Successful imidization reactions required a mixed solvent system, comprised of NMP and m-cresol, in the presence of catalysts. Proton conductivity measurements revealed that the proton conductivity improved with increasing hydrophilic and hydrophobic block lengths. The morphological structure of the multiblock copolymers was investigated using tapping mode atomic force microscopy (TM-AFM). The AFM images of the copolymers demonstrated well-defined nanophase separated morphologies, with the changes in the block length having a pronounced effect on the phase separated morphologies of the system. The self diffusion coefficient of water, as measured by $^1H$ NMR, provided a better understanding of the transport process. Thus, the block copolymers showed higher values than Nafion, and comparable proton conductivities in liquid water, as well as under partially hydrated conditions at $80^{\circ}C$. The new materials are strong candidates for use in PEM systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1550-1552
• /
• 1994

In order to investigate the effect of electrolyte solutions on the activities of bow-tie water trees in XLPE insulated power cable, we have tried to observe the characteristics on water treeing ( bow-tie type ) using several electrolyte solutions such as $CH_3COOH$, $MgCl_2$,HCl and NaCl solution and tap water. Bow-tie tree density in $CH_3COOH$ and $MgCl_2$ solution was higher than in any other solution, and the growth of tree was stimulated in NaCl and $CH_3COOH$ solution, and diffusion of bow-tie trees into insulation in $MgCl_2$, HCl and NaCl solutions was faster than in $CH_3COOH$ solution and water. Also, although the increase of applied voltage caused bow-tie tree density to be high, it didn't affect the growth of tree maximum length noticeably.

• 대한화학회지
• /
• 제28권3호
• /
• pp.194-202
• /
• 1984

陽이온 交換한 天然제올라이트에 依한 有機黃化合物의 液相吸着特性을 考察하였다. 平衡吸着量은 天然제올라이트의 交換한 陽이온과 吸着質인 有機黃化合物의 構造에 影響을 받고 있음을 알 수 있었다. 또한 平衡吸着量은 메르캅탄(mercaptane), 설파이드(sulfide), 디설파이드(disulfide), 치오펜(thiopen) 順으로 減小하였으며, 치오펜 誘導體의 경우는 ${\pi}$ 電子가 많아짐에 따라 吸着能은 교환 이온의 polarizing power에 比例하였다. 吸着速度로부터 有機黃化合物의 吸着은 pore 내의 擴散이 律速段階임을 알수 있었고, 水分과 같은 작은 吸着質은 micro pore에 吸着이 일어나는 反面, 有機黃化合物은 transitional-pore에 吸着이 일어났다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.83-86
• /
• 2003

화학레이저는 혼합현상을 이용하는 확산형태의 화학반응을 이용하게 된다. 따라서, 화학레이저 공동 내에서 산화제(F)와 연료(D$_2$)가 기저부에 의해서 분리되어 유입된다. 초음속 연소현상에서 혼합 및 연소특성에 큰 영향을 주는 기저부의 화학레이저 시스템에서의 분포역전현상에 초점을 맞추어 기저부의 크기를 0.4mm, 0.8mm, 1.6mm로 변화시켜가면서 수치해석을 수행하였다. 결과로서 분포역전현상이 두드러지게 기저부의 크기가 커짐에 따라서 넓은 영역에서 발생하게된다.

• 한국전기전자재료학회논문지
• /
• 제11권8호
• /
• pp.637-645
• /
• 1998

The characteristics of waveguide, electrode and packaging fabricated for acousto-optic tunable filters(AOTF) used for optical communications were analyzed. A $Ti:LiNbO_3$in-diffusing method was employed for the formation of the optical waveguide with a dimension of width $8{\mu}m$, length $30000-50000{\mu}m$ and varying the thickness. The diffusion was carried at $1050^{\circ}C$ for 8 hours to pattern the optical waveguide. The resulted waveguide exhibited a single mode at 1550nm optical wavelength. The width of IDT, with 10 SAM periods, was $5000{\mu}m$ . Impedances of the electrodes deposited with Au were analyzed using a network analyzer; $48.1\Omega$ at the center frequency of 193MHz for electrode thickness of $1500{\AA}$ and $50.7\Omega$ at the center frequency of 192MHz for $1600\AA$. And the characteristics of packaged AOTF was analyzed. When the electrical frequency 177.1MHz was applied to the device, the mode conversion efficiency was measured as 63% at the optical wavelength 1515nm.