• 한국산학기술학회논문지
• /
• 제19권9호
• /
• pp.108-115
• /
• 2018

단세대 기술의 확산 거동에 대한 이해는 시간의 변화가 주요한 확산 인자로 고려되었으나, 다세대 기술의 확산거동은 시간의 변화 외에 다양한 인자들을 고려할 필요가 있다. 본 연구에서는 다세대 기술의 확산경로를 분석하기 위해 가격 및 기술적 성능의 추가적인 인자들을 발굴하여 '시간, 가격, 성능' 차원의 확산경로를 정의하였고, 정의된 다차원 확산경로를 바탕으로 다세대 기술인 반도체 산업에 대해 확산경로를 추적하였다. 반도체 산업에 대한 사례 연구 결과 기술 확산경로는 '가격과 기술적 성능으로 구성되는 면적이 최대한 커지는 방향'으로 확산되는 거동을 보였다. 본 연구는 다세대 기술의 확산 거동을 다차원에 기반하여 분석하였고, 성숙 및 초기 단계의 다세대 기술들의 확산 거동에 대해 예측 가능하다는 이론적 의의를 지니고 있다. 또한 다세대 기술 산업의 연구개발 및 마케팅 담당자들에게도 시장 진입 및 퇴출 시기, 고객의 경제적 및 기술적 요구조건 파악을 위해 실무적으로도 의의가 있다.

• 한국지리정보학회지
• /
• 제12권3호
• /
• pp.88-100
• /
• 2009

본 연구에서는 GIS와 연계한 2차원 확산파 침수해석 모형을 개발하여 2002년 8월 집중호우로 인하여 침수피해가 발생했던 낙동강의 지류인 화포천유역에 대하여 하천제방의 월류 및 붕괴에 따른 침수해석을 실시하였다. 당시의 침수흔적도 및 FLUMEN 모형의 침수해석 결과와 시간별 침수심 및 최대 침수면적의 비교를 통해 모형의 적용성을 평가해 보았다. 침수흔적도와의 비교를 통해 침수면적에 대한 적합도를 분석한 결과 88.61%의 적합도를 갖는 것으로 확인되었으며, FLUMEN 모형과의 비교를 통하여 최대 침수면적 및 침수지역의 공간적 분포가 상당부분 일치하는 것으로 확인되었다. 따라서 2차원 확산파 침수해석 모형의 적용으로 계산된 시간별 침수구역 및 최대 침수면적 등은 홍수에 대비한 위험지역의 파악 및 재난저감 대책을 수립하기 위한 판단자료로 활용될 수 있을 것으로 기대된다.

• Nuclear Engineering and Technology
• /
• 제26권2호
• /
• pp.285-293
• /
• 1994

압축 벤토나이트에서 핵종이동은 확산에 의해 지배된다. 국산 벤토나이트에 대한 음이온핵종의 확산 특성 규명을 위해서 요오드이온을 대상으로 관통확산실험을 수행하였다. 대상매질은 동해안 지역의 벤토나이트를 사용하였으며, 실험용액은 합성 모의지하수에 I-125를 첨가하여 사용하였다. 압축 벤토나이트의 충전밀도는 1.2, 1.4, 1.7Mg/㎥등 세가지로 하였다. 요오드이온의 겉보기확산계수와 유효확산계수는 충전밀도가 증가함에 따라 감소하였고, 이들 확산계수의 값은 각자 3.80-7.12$\times$$10^{-11}$ $m^2$/s와 1.25-7.97$\times$$10^{-12}$ $m^2$/s의 범위에 있었다. 실험결과, 겉보기확산계수는 벤토나이트의 공극구조에 의존하였으며, 유효확산계수는 공극구조는 물론 핵종확산이동에 이용된 유효공극율에 의해 좌우되었다. 본 연구에서 얻어진 결과는 처분장안전성평가의 기초자료로 활용될 것이다.

• 한국입자에어로졸학회지
• /
• 제11권2호
• /
• pp.29-36
• /
• 2015

The purpose of this research is to find out the collection property of nanoparticle in diffusion filter to know particle size dispersion of nanomaterial using inertial force and principle of Brownian diffusion motion. We used inertial filters which are two different type and diffusion filters made by various kinds of Wiremesh and the different pieces of filter to compare with particle size distribution using NaCl particles. Finally, We made a conclusion as follows : (1) the bigger available charging volume is and the larger specific surface area of inertial filter is, the better collection efficiency is. (2) The higher wire-mesh number of filter is, the more collection efficiency of small particle is increasing because the wire of the higher Wiremesh number filter is thinner and denser. (3) The more pieces of wire-mesh filter, the more collection efficiency is increasing because it makes the residence time longer.

• Advances in materials Research
• /
• 제1권2호
• /
• pp.147-160
• /
• 2012

In the present study, diffusion bonding was carried out between AZ31B magnesium and AA2024 aluminium in the temperature range of $405^{\circ}C$ to $475^{\circ}C$ for 15 min to 85 min and 5MPa to 20 MPa uniaxial loads was applied. Interface quality of the joints was assessed by microhardness and shear testing. Also, the bonding interfaces were analyzed by means of optical microscopy, scanning electron microscopy, energy dispersive spectrometer and XRD. The maximum bonding and shear strength was obtained at $440^{\circ}C$, 12 MPa and 70 min. The maximum hardness values were obtained from the area next to the interface in magnesium side of the joint. The hardness values were found to decrease with increasing distance from the interface in magnesium side while it remained constant in aluminium side. It was seen that the diffusion transition zone near the interface consists of various phases of $MgAl_2O_4$, $Mg_2SiO_4$ and $Al_2SiO_5$.

• 전자공학회논문지B
• /
• 제33B권3호
• /
• pp.88-95
• /
• 1996

Recently, the use of color data is growing fast in the area of image processing. To represent full resolution image on a limited output device, image has to be quantized an dithered. So, many dithering techniques are foundd in the printing. In this paper, we propose nonlinear quantization to consider the overlapping phenomena of neighboring printing dots and modified dot diffusion algorithm to compensate the color degradation produced in the quantization process. In the modified dot-diffusion quantization errors to be diffused are adjusted to improve both image blur and color change produced in the dot diffusion. The printed image obtained by the proposed color dithering method has higher visual quality an less color degradation than the images by conventional printing method.

• 한국환경과학회지
• /
• 제6권5호
• /
• pp.437-449
• /
• 1997

To predict diffusion and movement of k pollutants In coastal urban region a numerical simulation shouts be consider atmospheric flow field with land-sea breeze, mountain-valley wand and urban effects. In this study we used Lagrangian [article dispersion method In the atmospheric flow field of Pusan coastal region to depict diffusion and movement of the Pollutants emoted from particular sources and employed two grid system, one for large scale calculating region with the coarse mesh grid (CMG) and the other for the small region with the One mesh 914 (FMG). It was found that the dispersion pattern of the pollutants followed local circulation system in coastal urban area and wale air pollutants exhausted from Sasang moved Into Baekyang and Jang moutain, air pollutants from Janglim moved into Hwameong-dong region.

• Ocean and Polar Research
• /
• 제30권4호
• /
• pp.537-543
• /
• 2008

The sediment resuspension and diffusion model is an integral part of a sediment transport and morphologic change model. We examined a vertical one-dimensional sediment resuspension and diffusion model using field data collected at about 10-m depth off the Saemangeun $4^{th}$ dike. The field data include waves, currents and suspended sediment concentration near the bed for about a day in May, 2007. The suspended sediment concentration obtained from the 1D model overestimated the observation about two orders of magnitude with single grain size and multiple grain sizes. The incorporation of the bed armoring effect, which adjusts the amount of suspended sediment with the available bed sediment, improved the agreement between the model and observation within a factor of two.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.51-57
• /
• 2021

The quality of the ceramic sintered coating on a metal surface through laser surface treatment is affected by the laser irradiation pattern. Depending on the laser irradiation pattern, the amount of residual stress and heat applied or accumulated on the surface increases or decreases, affecting the thickness attained in the ceramic sintering area. When the heat energy accumulated in the sintering area is high, the ceramic and the metal alloy melt and sufficiently mix to form a homogeneous and thick bonding interface. In this study, the thermal energy accumulation in the region sintered with zirconia was controlled using four types of laser processing patterns. The thickness of the diffusion region is analyzed by laser-induced breakdown spectroscopy of Mg-ZrO2 generated by laser sintering zirconia powder on the magnesium alloy surface. On the basis of the analysis of the Mg and Zr present in the sintered region through LIBS, the effect of the irradiation pattern on the sintering quality is confirmed by comparing and analyzing the heat and mass transfer tendency of the diffusion layer and the degree of diffusion according to the irradiation pattern. The derived diffusion coefficients differed by up to 9.8 times for each laser scanning pattern.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.997-1009
• /
• 1999

Silica particle formation and growth process including chemical reaction, coagulation and sintering was studied in a counterflow diffusion flame burner. The counterflow geometry provides a one dimensional flow field, along the stagnation point streamline, which greatly simplifies interpretation of the particle growth characteristics. $SiCl_4$ has been used as the source of silicon in hydrogen/oxygen/argon flames. The temperature profiles obtained by calculation showed a good agreement with experiment data. Using one and two dimensional sectional method, aerosol dynamics equation in a flame was solved, and these two results were compared. The two dimensional section method can consider sintering effect and growth of primary particle during synthesis, thus it showed evolution of morphology of non-spherical particles (aggregates) using surface fractal dimension. The effects of flame temperature and chemical loading on particle dynamics were studied. Geometric mean diameter based on surface area and total number concentration followed the trend of experiment results, especially, the change of diameters showed the sintering effect in high temperature environment.