• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.2
• /
• pp.119-126
• /
• 1999

A numerical model using soil surface energy balance and soil heat flow equations to estimate mulched soil temperature was developed. The required inputs data include weather data, such as global solar radiation, air temperature, wind speed, atmospheric water vapor pressure, the optical properties of mulching material, and soil physical properties. The observed average soil temperature at 50 cm depth was used as the initial value of soil temperature at each depth. Soil temperature was simulated starting at 0 hour at an interval of 10 minutes. The model reliably described the variation of soil temperature with time progress and soil depth. The correlation between the estimated and measured temperature yielded coefficient values of 0.961, 0.966 for 5cm and 10cm depth of the bare soil, respectively, 0.969, 0.965 for the paper mulched soil, and 0.915, 0.938 for the black polyethylene film mulched soil. The percentages of absolute differences less than 2$^{\circ}$C between soil temperatures measured and simulated at 10 minute interval were 97.4% and 98.5% for 5 cm and 10cm for the bare soil, respectively, and 95.8% and 97.4% for the paper mulched soil, and 70.1% and 92.5% for the polyethylene film mulched soil. The results indicated that the model was able to predict the soil temperature fairly well under mulched condition. However, in the night time, the model performance was a little poor as compared with day time due to the difficulty of accurate determination of the atmospheric long wave radiation.

• Management & Information Systems Review
• /
• v.26
• /
• pp.27-60
• /
• 2008

Researches on the introduction of ERP system kept on examining the critical successful factors (CSFs) that focus on factors to achieve effectively successful projects, and trying to measuring the actual effectiveness of the introduction of ERP system. However, most of the preceding researches on the effectiveness of the introduction of ERP system that was searching devoted effects has been ceased, and actually even researches on the economical results have just done the basic cognitive evaluation of result indicators by many questionnaires instead of objective measuring values, because of the difficulty of measuring the evaluation of the result. Moreover, researches on positive effects of the introduction of ERP on enterprise results and researches that failed to give advantageous effects showed different results each other. And a part of researches reported that only a part of result indicators were partially affected. In this research, we investigated Korean large enterprises or middle-sized enterprises in manufacture industry that introduces SAP R/3 and Oracle package to compare their quantitative financial results after the introduction of ERP system, in order to measure the effects of the ERP system. First, we evaluated the difference of the quantitative financial results before and after the introduction of the ERP system. Second, we evaluated the opportunities shown by the effects after the introduction of the ERP system. Third, we removed the sample of the exchange crisis (IMF) and executed the additional analysis to reflect the average increasing and decreasing rate in the industry, so that pure evaluation can be achieved. Inherent limits of precedent researches are removed and practical effects of the pure introduction of the ERP system are evaluated, so the research of this research is significant. The result of this research is as follows. Because of the introduction of ERP, the rate of turnover of inventory property has increased and sales of preparation inventory property have decreased so that more effective inventory property management has been achieved. Moreover, preparation sales of labor costs and preparation sales of the number of employees have decreased to show the effect of the reduction of labor costs. However, it could no be concluded that we could increase the profit due to the introduction of ERP system. Due to the introduction of ERP, although we concluded that the return on assets (ROA) and the additional value of one-person employee statistically showed obvious differences and increased, the return on equity failed to show obvious differences after the process of introduction of ERP.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.1-10
• /
• 2007

Most of natural images have a special property, what is called self-similarity, which is the basis of fractal image coding. Even though an image has local stationarity in several homogeneous regions, it is generally non-stationarysignal, especially in edge region. This is the main reason that poor results are induced in linear techniques. In order to overcome the difficulty we propose a non-linear technique using self-similarity in the image. In our work, an image is classified into stationary and non-stationary region with respect to sample variance. In case of stationary region, do-noising is performed as simply averaging of its neighborhoods. However, if the region is non-stationary region, stationalization is conducted as make a set of center pixels by similarity matching with respect to bMSE(block Mean Square Error). And then do-nosing is performed by Gaussian weighted averaging of center pixels of similar blocks, because the set of center pixels of similar blocks can be regarded as nearly stationary. The true image value is estimated by weighted average of the elements of the set. The experimental results show that our method has better performance and smaller variance than other methods as estimator.

• KIEE International Transaction on Systems and Control
• /
• v.2D no.2
• /
• pp.78-91
• /
• 2002

In the thermal power plant, there are six manipulated variables: main steam flow, feedwater flow, fuel flow, air flow, spray flow, and gas recirculation flow. There are five controlled variables: generator output, main steam pressure, main steam temperature, exhaust gas density, and reheater steam temperature. Therefore, the thermal power plant control system is a multinput and output system. In the control system, the main steam temperature is typically regulated by the fuel flow rate and the spray flow rate, and the reheater steam temperature is regulated by the gas recirculation flow rate. However, strict control of the steam temperature must be maintained to avoid thermal stress. Maintaining the steam temperature can be difficult due to heating value variation to the fuel source, time delay changes in the main steam temperature versus changes in fuel flow rate, difficulty of control of the main steam temperature control and the reheater steam temperature control system owing to the dynamic response characteristics of changes in steam temperature and the reheater steam temperature, and the fluctuation of inner fluid water and steam flow rates during the load-following operation. Up to the present time, the Proportional-Integral-Derivative Controller has been used to operate this system. However, it is very difficult to achieve an optimal PID gain with no experience, since the gain of the PID controller has to be manually tuned by trial and error. This paper focuses on the characteristic comparison of the PID controller and the modified 2-DOF PID Controller (Two-Degrees-Freedom Proportional-Integral-Derivative) on the DCS (Distributed Control System). The method is to design an optimal controller that can be operated on the thermal generating plant in Seoul, Korea. The modified 2-DOF PID controller is designed to enable parameters to fit into the thermal plant during disturbances. To attain an optimal control method, transfer function and operating data from start-up, running, and stop procedures of the thermal plant have been acquired. Through this research, the stable range of a 2-DOF parameter for only this system could be found for the start-up procedure and this parameter could be used for the tuning problem. Also, this paper addressed whether an intelligent tuning method based on immune network algorithms can be used effectively in tuning these controllers.

• KDI Journal of Economic Policy
• /
• v.14 no.2
• /
• pp.189-203
• /
• 1992

Any money model should address the most important phenomenon of a monetary economy, which is the phenomenon of the rate of return dominance. Even if the holding returns on financial or nonfinancial assets are higher than the rate of return on fiat money holding, which is typically zero, people still hold and use money. In a period of accelerating inflation, number of dominating assets increases continuously, yet people continue to hold and use money. Wallace's (1980) overlapping generations model cannot address the rate of return dominance phenomenon. His model does not capture the mediun of exchange role of fiat money. In this paper, an overlapping types model of fiat money is constructed, in which different types of consumers have different preferences on different types of goods, are endowed with different types of goods, are located at seperated regions, and live for only two periods. In this model, people hold and use money despite the dominating assets, even if inflation accelates. Money in this case serves as a pure medium of exchange, whereas in Wallace's model, money serves as a pure store of value, and money disappears if a dominating asset exists. An interesting feature of the overlapping types model presented in this paper is that money does not provide a cheap approximation to an idealized and efficient real allocation. A monetary economy is always superior to a nonmonetary economy, because money helps overcome the incompleteness of the overlapping types friction. In a monetary economy, however, a pareto optimal allocation cannot always be achieved, because money cannot always overcome the overlapping types friction itself. Therefore, with the criterion of optimality of real allocations, the monetary economy is more optimal than a nonmonetary economy but less optimal than a complete Arrow-Debreu economy. This feature has important implications on macro modelling. Because of the difficulty in introducing money into a macro model in an essential and endogenous manner as in the overlapping types model of this paper, a macro model typically ignores money and studies real allocations without the money factor. The possible inefficiencies of a monetary economy, relative to a complete real Arrow-Debreu economy, may indicate differences in real allocations between the two models.

• Management & Information Systems Review
• /
• v.35 no.2
• /
• pp.83-97
• /
• 2016

The purpose of this study is to evaluate our system and consider how the tax rules on corporate reorganization and asset adjustment account can be improved. The scope of this study includes the Korean tax rules on corporate reorganizations, as well as key tax benefits provided by the Special Tax Treatment Control Act. In case of Korea, The relevant regulations and system of taxation respecting the merger has been made the rapid progress in several respects in this situation, there are capable of improvement. This paper suggests improve some problems on tax avoidance abusing incomplete tax law. First, the asset adjustment account is the difficulty that it needs to follow-up during this period of time, as well as the complexity of the accounting and tax adjustments on the practice. If it is permitted to succeed asset-liability as market value, the complexity of asset adjustment account in corporate tax accounting also disappear. Second, in case that controlling shareholders possess more than 20% of merged entity, they could not get the tax deferral until after the time of two years has elapsed. It needs to further alleviate the merged entity ratio than the present level. Finally, after the merger it will be to strengthen the surveillance provisions of five years from the current two years. In addition, continuity of shareholder's requirements and business requirements, it is also necessary to strengthen the requirements of the follow-up provided by a separate regulation.

• Journal of the Korea Convergence Society
• /
• v.9 no.3
• /
• pp.73-78
• /
• 2018

Modern society has evolved to such an extent that computing technology has become an integral part of various fields, creating new and superior value to society. Education on computer literacy, including the ability to design and build software, is now becoming a universal education that must be acquired by everyone, regardless of the field of study. Many universities are imparting software education to students to improve their problem-solving ability, including to students who are not majoring in computers. However, software education contains courses that are meant for computer majors and many students encounter difficulty in learning the grammar of programming language. To solve this problem, this paper analyzes the research outcomes of the existing software education model and proposes a Python-based software education model for students who are not majoring in computer science. Along with a Python-based software education model, this paper proposed a curriculum that can be applied during one semester, including learning procedures, and teaching strategies. This curriculum was applied to a liberal arts class and a meaningful result was derived. If the proposed software education model is applied, the students will be interested in the computer literacy class and improve their computational thinking and problem-solving ability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.28-35
• /
• 2016

The in-situ thermal response test for the design of a ground heat exchanger of geothermal heat pumps have difficulty in predicting the outlet temperature according to the variation of conditions due to the expense and time. This paper suggests a 3-D CFD analysis method to predict the heat transfer performance of vertical type ground heat exchanger, which is mostly used in national, and the outlet temperature and the slope of two in-situ thermal response tests were compared to test the proposed CFD reliability. The results of CFD analysis showed that the outlet temperature was predicted to within $0.5^{\circ}C$ of the actual value and the slope was predicted to within 1.6%. The reliability of the CFD analysis method was confirmed using this process, and the outlet temperature prediction of the two in-situ thermal response tests was obtained by changing ${\pm}20%$ of the flow rate and the effective thermal conductivity conditions, respectively. The results of CFD analysis showed that the outlet temperature of Case 1 was 28.0 (-20%) and $29.6^{\circ}C$ (+20%) for the flow rate variation and $29.6^{\circ}C$ (-20%) and $28.0^{\circ}C$ (+20%) for the effective thermal conductivity variation, and the outlet temperature of Case 2 was 28.4 (-20%) and $29.8^{\circ}C$ (+20%) for the flow rate variation and $29.7^{\circ}C$(-20%) and $28.4^{\circ}C$(+20%) for the effective thermal conductivity variation.

• The KIPS Transactions:PartA
• /
• v.12A no.6 s.96
• /
• pp.539-546
• /
• 2005

Recently, as the number of Internet users are growing explosively, e-learning has been applied spread, as well as remote evaluation of intellectual capacity However, only the multiple choice and/or the objective tests have been applied to the e-learning, because of difficulty of natural language processing. For the intelligent marking of short-essay typed answer papers with rapidness and fairness, this work utilize heterogenous linguistic knowledges. Firstly, we construct the semantic kernel from un tagged corpus. Then the answer papers of students and instructors are transformed into the vector form. Finally, we evaluate the similarity between the papers by using the semantic kernel and decide whether the answer paper is correct or not, based on the similarity values. For the construction of the semantic kernel, we used latent semantic analysis based on the vector space model. Further we try to reduce the problem of information shortage, by integrating Korean Word Net. For the construction of the semantic kernel we collected 38,727 newspaper articles and extracted 75,175 indexed terms. In the experiment, about 0.894 correlation coefficient value, between the marking results from this system and the human instructors, was acquired.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.145-152
• /
• 2006

Industry development caused numerical and quantitative increase of noxious chemical substances that contain risk assessment in water resources. For use of efficient water resources a pre-treatment of contaminant source which is flowed in water resources is recognized in essential process. Therefore, the discharged water quality from discharged company began to control contaminant by total amount of pollutant in domestic. However, to estimate closely chemical substances it is not proved up to now, monitoring is very important. This study achieved a monitoring of micro noxious chemical substance by fiber and chemistry industrial wastewater inflow to examine risk assessment of the water system of Nakdong river. Chloroform was measured highest among volatile organic compounds (VOCs) that the results of water quality of influent and effluent are detected from 7 companies of study area. The other side, because measured value of detected chloroform is indefinite detection level in the same company, it is difficulty in management of water quality. However it may not be much effects of the water system of Nakdong river because these company's effluent is high treatment efficiency of chloroform (more than 88%) in sewage treatment plant. On the other hand, in the investigated results for the European Union specified priority substance that is detected to relationship influent and effluent from fiber/chemistry associated industries, these substances were not detected and domestic data was hardly referred. Therefore, data construction of continuous monitoring about this water quality may have to be achieved certainly to utilize as country policy.