• Transactions of Materials Processing
• /
• v.16 no.4 s.94
• /
• pp.309-312
• /
• 2007

Deformation behavior of $Zr_{55}Cu_{30}Al_{10}Ni_5$(at. %) bulk metallic glass(BMG) fabricated by suction casting method has been investigated at elevated temperatures in this study. The BMG was first verified to have an amorphous structure with the analysis of X-ray diffraction(XRD) and differential scanning calorimetry(DSC) data. A series of compression tests has consequently been performed in the region of supercooled liquid temperature to investigate the behavior of high temperature deformation. A transition from Newtonian to non-Newtonian flow appeared to take place depending upon both the strain rate and test temperature. A processing map based on a dynamic materials model has been constructed to estimate a feasible forming condition for this BMG alloy.

• Transactions of Materials Processing
• /
• v.24 no.2
• /
• pp.101-106
• /
• 2015

Recently, silicone is being used for LED chip lens due to its good thermal stability and optical transmittance. In order to predict residual stresses, which cause optical birefringence and mechanical warpage of silicone, a finite element analysis was conducted for the curing of silicone during molding. For the analysis of the curing process, a dynamic cure kinetics model was derived based on the results of a differential scanning calorimetry (DSC) testing and applied to the material properties for finite element analysis. Finite element simulation results showed that a step cure cycle reduced abrupt reaction heat and showed a decrease in the residual stresses.

• Advances in aircraft and spacecraft science
• /
• v.7 no.6
• /
• pp.475-493
• /
• 2020

This paper is focused on the characterization of the thermomechanical properties of semicrystalline poly-ether-ether-ketone (PEKK) and of carbon fiberreinforced thermoplastic based laminated composites (C/PEKK) below and above the glass transition temperature (T_g). Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA) and tensile tests are carried out on both pure PEKK polymer and [(±45)₂, +45]_s C/PEKK composite samples, showing a significant similarity in behavior. The employment of a simple micromechanical model confirms that the mechanical and physical behavior of the polymer and that of the matrix in the composite are similar.

• Fibers and Polymers
• /
• v.3 no.3
• /
• pp.109-112
• /
• 2002

Polybutadiene(PB) was epoxidized to various extents with m-chloroperbenzoic acid (MCPBA) in homogeneous solution. The thermal properties of the epoxidized PBs were investigated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). As a result of epoxidation the glass transition temperature (Tg) of PB increased by approximately $0.8^{\circ}$ for each 1 mol% of epoxidation. The thermal decomposition of the epoxidised PBs occurred in two-step process, while that of PB exhibited apparent one-step degradation process.

• Macromolecular Research
• /
• v.10 no.3
• /
• pp.145-149
• /
• 2002

Transesterification between poly(trimethylene terephthalate) (PTT) and bisphenol-A-polycarbonate (PC) is studied by differential scanning calorimetry (DSC) and nuclear magnetic resonance (NMR) spectroscopy. When the blend of PTT/PC is annealed at higher temperatures, the samples do not show any melting peak at an initial stage, indicating the samples completely lose their crystallinity due to the formation of random copolymers. However, when the random copolymer is annealed at temperatures lower than the melting temperature of PTT, a melting peak is observed, indicating that the random copolymers are sequentially reordered. The melting point and the heat of fusion of crystals formed from the crystallization-induced sequential reordering depend upon the annealing temperature and time. The average sequence length determined from NMR is increased as the blocks are regenerated.

• YAKHAK HOEJI
• /
• v.30 no.2
• /
• pp.87-95
• /
• 1986

Inclusion complexation of $\alpha$-cyclodextrin($\alpha$-CD), $\beta$-cyclodextrin($\beta$-CD) and tri-O-methyl-$\beta$-cyclodextrin(tri-O-methyl-$\beta$-CD) with chlorpamide(CPA) in aqueous solution and in the solid state were studied by the solubility method, spectroscopy (UV, IR), differential scanning calorimetry (DSC) and powder X-ray diffractometry, and all their molar ratios were found to be 1:1. The solid complexes of CPA with three kinds of cyclodextrins were prepared by a freezedrying method, and their dissolution behaviors were examined. As a result, the release of CPA from the inclusion complexes was significantly improved. The intrinsic dissolution rate of CPA in cyclodextrin inclusion complexes was about 51 times ($\alpha$-CD inclusion complex) and 12 tmies ($\beta$-CD inclusion complex) larger than that of intact CPA.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.11-11
• /
• 2002

K(H/sub 0.34/D/sub 0.66/)₂PO₄는 KH₂PO₄(KDP)의 수소원자를 중수소가 일부 치환한 결정이다. 실험에 사용한 시료는 KDP 원료시약을 중수(D₂O)에서 성장시킨 것으로, 단결정 구조해석을 통해 D와 H의 점유율을 정련하였다. 본 연구에서는 상전이에 따른 결정구조의 변화를 연구하기 위하여 한국원자력연구소의 연구용 원자로인 하나로에 설치된 고분해능 분말회절장치(HRPD)로 상온에서부터 10K 까지 온도를 변화시켜가며 회절패턴을 측정하였다. 그 결과 190-l95K 사이에서 상전이가 일어났으며, 이것은 DSC(Differential Scanning Calorimetry) 측정결과와 상온에서 단결정 분석결과 D의 점유도로 계산한 상전이 온도와도 잘 일치한다. 10K와 298K에서 측정한 회절패턴에 대해 프로그램 FullProf를 사용하여 각각 리트벨트 구조정련을 수행한 결과, 상온에서는 정방정계이며 공간군은 I-42d 이고 저온에서는 사방정계인 Fdd2로 변한다. 온도변화에 따른 핵밀도 분포를 측정한 결과 상온에서 D/H는 2회 대칭축을 중심으로 50％ 점유도의 두 가지 가능한 위치를 갖는 무질서(disorder) 상태로 존재하나 온도가 내려갈수록 한 쪽으로 치우쳐 상전이 온도 아래에서는 하나의 산소와 결합하여 질서(order) 상태를 보이며 다른 하나와는 수소결합을 이룬다.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.268-274
• /
• 2015

In this paper, the isothermal crystallization kinetics of a functional PP (FPP) with different grafting yields (GY)-methacryloxyethyltrimethyl ammonium chloride (DMC) grafted PP were investigated by differential scanning calorimetry (DSC). The results showed that the crystallization rate of FPP (GY=4.83%) was the highest for all of the studied samples. Furthermore, for the FPP with different GY, the value of $t_{1/2}$ became longer with increasing the grafting yield (GY). The possible explanation was that the quaternary ammonium groups introduced affected the crystallization process of the FPP in two opposite directions, i.e. promoting the nucleation and hindering the transport of the chain molecules towards the growing nuclei. Polarized optical micrographs showed that the DMC chains acted as nucleating agents, which accelerated the nucleation. In addition, the results showed the FPP had lower nucleation free energy than the PP. This study would be useful for designing the processing parameters of the grafted samples.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.143-145
• /
• 2007

The correlation between crystallization and deformation behavior in the supercooled liquid region (SLR) of a $Cu_{54}Ni_{6}Zr_{22}Ti_{18}$ bulk metallic glass (BMG) alloy is investigated by compression tests, differential scanning calorimetry (DSC), electron energy loss spectrometry (EELS) and high resolution transmission electron microscopy (HRTEM). In the SLR, This BMG alloy was strongly depended on the deformation temperature and the alloy exhibits important change in deformation behavior after a given time which is directly connected to the development of crystallization. Compressive stress impeded decomposition and consequently retarded forming of nano-crystal, which led to enlarge the homogeneous deformation region of the BMG alloy in SLR during compression test.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.722-723
• /
• 2006

A new method has been developed to fabricate microcomponents by a combination of photolithography and sintering of metallic powder mixtures, without the need for compression and the addition of Mg. This involves (1) the fabrication of a micromould, (2) mould filling of the powder/binder mixture, (3) debinding and (3) sintering. The starting powdered materials consisted of a mixture of aluminium powder(average size of 2.5 um) and alloying elemental powder of Cu and Sn(less than 70nm), at appropriate proportions to achieve nominal compositions of Al-6wt%Cu, Al-6wt%Cu-3wt%Sn. This paper presents detailed investigation of debinding behaviour and microstructural development.