• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.1 s.24
• /
• pp.61-69
• /
• 2003

The study is the open area keeping a few visible satellites and the urban area covered with the high building, an electric pole were chosen for evaluation of accuracy of satellite positioning. First, suggest the validity of RTK-GPS, RTK-GPS/GLONASS and compared the accuracy with that of the classical surveying method. As a result. In urban area, in case of real time kinematic positioning when compare between the method combined by GPS/GLONASS and by GPS alone the result of GPS/GLONASS - combination more excellent. And in open ana positioning combined GPS/GLONASS was more excellent than GPS alone in both real time differential and real time kinematic. So, RTK-GPS, RTK-GPS/GLONASS contribute to the digital mapping of Basic map and the existed map necessary for the building of PBLIS to the computerization of cadastral map in the effectiveness in time and in cost and hereafter the combined GPS/TS is expected to contribute to the development of NGIS, Re-investigation of a land register, the execution drawing on site.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.7
• /
• pp.493-502
• /
• 2001

This paper propose a new built-in current sensor(BICS) for current testing that has some advantages compared with conventional logic testing. The designed BICS detects the fault in circuit under test (CUT) and makes a Pass/Fail signal by comparison between CUT current and duplicated inverter current. The proposed circuit consists of a differential amplifier, a comparator and a inverter. It requires 10 MOSFETs and 3 inverters. Since the designed BICS do not require the extra clock, the added extra pin is only one output pin. The mode selection is not used in this circuit. Therefore we can apply the circuit to on-line testing. The validity and effectiveness are verified through the HSPICE simulation of circuits with defects. When CUT is a 8$\times$8 parallel multiplier, area overhead of the BICS is about 4.34%.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.5
• /
• pp.45-55
• /
• 2002

In this paper, we describe an outdoor augmented reality system using GPS tracking for position and attitude information. The system consist of a remote mobile operation unit and a ground operation unit. The remote mobile operation unit includes a real-time image acquiring device, a GPS tracking device, and a wireless data transceiver; the ground operation unit includes a wireless transceiver, a virtual image generating device, and an image superimposing device. The GPS tracking device for measurement of position and attitude of the remote mobile operation unit was designed by TANS Vector and RT-20 for DGPS. The wireless data transceiver was for data transmission between the remote mobile operation unit and the ground operation unit. After the remote mobile operation unit was installed on a vehicle and a helicopter, the system was evaluated to verify its validity in actual applications. It was found that the implemented system could be used for obtaining real-time remote information such as construction simulation, tour guide, broadcasting, disaster observation, or military purpose.

• Convergence Security Journal
• /
• v.8 no.4
• /
• pp.127-134
• /
• 2008

In this paper, we try to improve the accuracy of automatic measurement for analysis equipment by detecting efficiently the edge of a waterdrop with transparency. In order to detect the edge of a waterdrop with transparency, we use an edge detecting technique, MADD (Modified Adaptive Directional Derivative), which can identify the ramp edges with various widths as the perfectly sharp edges and respond effectively regardless of enlarging or reducing the image. The proposed edge detecting technique by means of perfect sharpening of ramp edges employs the modified adaptive directional derivatives instead of the usual local differential operators in order to detect the edges of image. The modified adaptive directional derivatives are defined by introducing the perfect sharpening map into the adaptive directional derivatives. Finally we apply the proposed method to contact angle arithmetic and show the effiency and validity of the proposed method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.579-587
• /
• 2014

This paper deals with precise analytical state equation modeling of a variable speed refrigeration system (VSRS) for optimum control in state space. The VSRS is described as multi-input and multi-output (MIMO) system, which has two controlled variables and two control inputs. First, the Navier-Stokes equation and mass flow rate were applied to each component of the basic refrigeration cycle to build a dynamic model. The dynamic model, represented by a differential equation, was transformed into the state equation formula. Next, a full-order state observer was built to estimate all of the state variables to compose an optimum control system. Then, an optimum controller was designed to minimize an evaluation function that has input energy and control error. Finally, simulations and experiments were conducted to verify the validity of the proposed modeling and designed optimum controller to regulate target temperature and superheat in a 1RT oil cooler system. The results show that the proposed method, state equation modeling and optimum control, is efficient to ensure optimal control performance of the VSRS.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.1-10
• /
• 1998

This paper presents a vorticity-based numerical method for analyzing an incompressible Newtonian viscous flow around an impulsively started cylinder. The Navier-Stockes equations have a natural Helmholtz decomposition. The vorticity transport equation and the pressure equation are derived from this decoupled form. The associated boundary conditions are dynamic for the vorticity and pressure variables representing the coupling relation between them and the force balance on the wall. The various numerical treatments for solving the governing equations are introduced. According to Wu et al.(1994), the boundary conditions are decoupled, keeping the dynamic relation between vorticity and pressure. The vorticity transport equation is formulated by FVM and TVD(Total Variation Diminishing) scheme is used for the convection term. An integral approach similar to the panel method is used to obtain the velocity field for a given vorticity field and the pressure field, instead of the conventional differential approaches. In the numerical process, the structured grid is generated. The results are compared to existing numerical and analytic results for the validity of the present method.

• Korean Institute of Interior Design Journal
• /
• v.24 no.5
• /
• pp.42-50
• /
• 2015

In the 21st century, university library is changing into a new paradigm. Among others, color image emerges as an important aspect of the library. Up to now, studies on colors of indoor space have been limited on partial and specific spaces. But, this study, using the tool of emotional evaluation, aims to do a comprehensive research on color image of the whole space. This research uses the H University library completed in March 2015. This research is performed in the following procedure. First, previous related researches for the past ten years from 2005 to 2015 is examined, which will help understand the trends in this kind of research, and set up the concrete goal of research. By literature review, color image is established in the environmental psychological aspect. Second, to analyze colors, all the spaces of the library from the entrance lobby are filmed. Filmed images are changed into mosaic, and color palettes are composed, and color values are calculated using the Munsell color system. Third, emotional words are extracted, and emotional evaluation is made. Using the Semantic Differential scale method, emotional differences among subjects are compared, and the validity of the survey data is tested using the statistical program SPSS 18.0. As the outcome of the research shows, the color image and emotion in space are closely related. And, through emotion, it is possible to get color image, and this aspect can be scholastically systemized and developed.

• Parasites, Hosts and Diseases
• /
• v.29 no.3
• /
• pp.217-226
• /
• 1991

Three morphological types of the genus Metagonimus were found encysted in the dace, Tribolodon tacganowskii, caught from the Sumjin River, Korea. They include Metagonimus Yokogawa type (M. yokogawai) , Miyata type, and Koga type according to Saito's classification. The metacercariae were experimentally fed to rats and hamsters and a total of 1,624 Metagonimus worms were recovered from their small intestine. The number of each type was 820 for Yokogawa type, 688 for Miyata type, 46 for Koga type, and 70 undetermined. The major differential keys between Yokogawa and Miyata types were in the position of two testes, distribution of uterine tubules, and size of the eggs, and the keys between Miyata and Koga types were in the position of two testes, distribution of vitelline follicles, and size of the eggs. The validity of Miyata type as a specific level should be retained until more convincing evidences are obtained. Koga type is regarded as a synonym of M. takahashii. The present results reveal that there are 3 morphological types of Metagonimus whose larvae are encysted in the dace, T. tacganowskii, from the Sumjin River. Key words: Metagcnimus yokogawai, morphological types, rats, hamsters, dace ( Tribolodon tacxanowskii) , Sumjin Rver.

• Bulletin of the Korean Chemical Society
• /
• v.2 no.2
• /
• pp.60-66
• /
• 1981

The hypothesis that three classes of water exist in hydrogels, namely X water (free water-like), Z-water (bound water-like), and Y water (interfacial water-like), has been verified and generally accepted. To further check the validity of this hypothesis and to study the nature of X, Y, and Z water as conformation changes, several experiments have been done using Tactic Poly(2-hydroxyethyl methacrylate) (P-HEMA) gels. Thermal expansively data for tactic P-HEMA gel was obtained. In each case of isotactic and syndiotactic P-HEMA, the higher water content gels showed an extremely sharp volume change at $0^{\circ}C$, indicating the presence of normal free water-like. Lower water content gels showed no anomalous change in thermal expansion, indicating that the water is bound water-like. The medium water content gels exhibited intermediate behavior. These results were also confirmed by bulk gel conductivity measurments. The differential scanning calorimeter(DSC) experiment was simply introduced to further verify the bound water-like quantities which was obtained by the method of dilatometry and specific conductivity. Observing the amounts of X, Y, and Z water with the change of tacticity, the similar content of bound water-like may be due to the same primary structure of isotactic and syndiotactic polymer and the difference in free and interfacial water-like content may be due to the difference in secondary and tertiary structure of tactic polymer. Therefore, as the polymer conformation varies, the free and interfacial water-like content will be varied. In order to demonstrate these concepts, Russel et al.'s CPK space-filling molecular models of isotactic and syndiotactic P-HEMA was utilized.

• Steel and Composite Structures
• /
• v.43 no.5
• /
• pp.581-601
• /
• 2022

The main objective of this research work is to investigate the free vibration behavior of annular sandwich plates resting on the Kerr foundation at thermal conditions. This sandwich configuration is composed of two FGM face sheets as coating layer and a porous GPLRC (GPL reinforced composite) core. It is supposed that the GPL nanofillers and the porosity coefficient vary continuously along the core thickness direction. To model closed-cell FG porous material reinforced with GPLs, Halpin-Tsai micromechanical modeling in conjunction with Gaussian-Random field scheme is used, while the Poisson's ratio and density are computed by the rule of mixtures. Besides, the material properties of two FGM face sheets change continuously through the thickness according to the power-law distribution. To capture fundamental frequencies of the annular sandwich plate resting on the Kerr foundation in a thermal environment, the analysis procedure is with the aid of Reddy's shear-deformation plate theory based high-order shear deformation plate theory (HSDT) to derive and solve the equations of motion and boundary conditions. The governing equations together with related boundary conditions are discretized using the generalized differential quadrature (GDQ) method in the spatial domain. Numerical results are compared with those published in the literature to examine the accuracy and validity of the present approach. A parametric solution for temperature variation across the thickness of the sandwich plate is employed taking into account the thermal conductivity, the inhomogeneity parameter, and the sandwich schemes. The numerical results indicate the influence of volume fraction index, GPLs volume fraction, porosity coefficient, three independent coefficients of Kerr elastic foundation, and temperature difference on the free vibration behavior of annular sandwich plate. This study provides essential information to engineers seeking innovative ways to promote composite structures in a practical way.