• 제목/요약/키워드: Differential Ratio

검색결과 1,135건 처리시간 0.037초

Isolation and Characterization of Pepsin-soluble Collagens from Bones, Skins, and Tendons in Duck Feet

  • Kim, Hyun-Wook;Yeo, In-Jun;Hwang, Ko-Eun;Song, Dong-Heon;Kim, Yong-Jae;Ham, Youn-Kyung;Jeong, Tae-Jun;Choi, Yun-Sang;Kim, Cheon-Jei
    • 한국축산식품학회지
    • /
    • 제36권5호
    • /
    • pp.665-670
    • /
    • 2016
  • The objectives of this study were conducted to characterize pepsin-soluble collagen (PSC) extracted from bones (PSC-B), skins (PSC-S), and tendons (PSC-T) of duck feet and to determine their thermal and structural properties, for better practical application of each part of duck feet as a novel source for collagen. PSC was extracted from each part of duck feet by using 0.5 M acetic acid containing 5% (w/w) pepsin. Electrophoretic patterns showed that the ratio between α1 and α2 chains, which are subunit polypeptides forming collagen triple helix, was approximately 1:1 in all PSCs of duck feet. PSC-B had slightly higher molecular weights for α1 and α2 chains than PSC-S and PSC-T. From the results of differential scanning calorimetry (DSC), higher onset (beginning point of melting) and peak temperatures (maximum point of curve) were found at PSC-B compared to PSC-S and PSC-T (p<0.05). Fourier transform infrared spectroscopy (FT-IR) presented that PSC-S and PSC-T had similar intermolecular structures and chemical bonds, whereas PSC-B exhibited slight difference in amide A region. Irregular dense sheet-like films linked by random-coiled filaments were observed similarly. Our findings indicate that PSCs of duck feet might be characterized similarly as a mixture of collagen type I and II and suggest that duck feet could be used for collagen extraction without deboning and/or separation processes.

활석비짐 무문토기의 고고과학적 특성: 천안 백석동 고재미골 유적 (Archaeological Scientific Characteristics of Patternless Pottery with Talc Temper: Baekseokdong Gojaemigol Site in Cheonan, Korea)

  • 김수경;이찬희
    • 보존과학회지
    • /
    • 제31권2호
    • /
    • pp.159-173
    • /
    • 2015
  • 천안 백석동 고재미골 무문토기는 활석계와 비활석계로 나눌 수 있으며 비활석계는 각섬석계를 포함한다. 이들은 태토와 비짐의 산출상태 및 내부조직에서 뚜렷한 차이점은 관찰되지 않으며 색상에 따라 흑색과 적갈색 및 황갈색으로 나타난다. 또한 공통적으로 비짐의 양은 많으며 분급은 불량하고 원마도도 낮다. 유적지 토양에서는 녹니석과 석영, 사장석, 고령석, 운모류가 동정되었고 원마도와 분급은 불량하다. 활석 및 비활석 토기 간의 대자율과 흡수율 및 가비중은 큰 차이 없이 넓고 고른 영역에 분포한다. 활석 토기의 주성분원소 거동특성은 비활석 및 각섬석 토기와 유사하며 원소의 부화와 결핍 양상도 일치한다. 다만 MgO는 활석 및 각섬석 토기에서 크게 부화되는 경향을 보인다. 희토류, 호정 및 불호정 원소의 거동특성 또한 모든 종류의 토기가 유사하였으며 토양에서도 큰 차이는 발견되지 않는다. 고재미골 유적지 토양에서는 활석과 각섬석이 검출되지 않는 것으로 보아, 토기제작에는 인위적으로 첨가했을 가능성이 매우 높은 것으로 판단되며, 백석동 일대의 편마암복합체에는 활석층이 협재되어 있어 이를 사용했을 개연성이 충분하다. 그러나 태토의 상전이와 열분석 결과로 볼 때, 토기의 소성온도는 서로 달라 활석혼입 토기는 $800{\sim}870^{\circ}C$의 범위를 보이며, 비활석 및 각섬석 토기의 소성온도는 $900{\sim}950^{\circ}C$의 범위로 추정된다.

비대칭정보하에서의 최적계약 도출 -에너지절약시장 (Third-Party Financing Contracts Between Energy Users and Energy Saving Companies)

  • 강광규
    • 환경정책연구
    • /
    • 제8권4호
    • /
    • pp.75-94
    • /
    • 2009
  • 제3자재원조달 계약의 과정이 1단계 신호발생 게임과 2단계 주인-대리인 게임 등 2단계 게임 모형을 통해 분석된다. 2단계 게임의 해는 역진귀납법을 통해 구해진다. 2단계 게임에서, 에너지절약기업의 최적 노력수준, 에너지 사용자의 최적 보상 체계, 그리고 두 경기자의 보수는 각각의 부분게임에서 도출된다. 이렇게 해서 도출된 각각의 부분게임의 최적해는 서로 비교된다. 그 결과 우리는 만약 에너지절약기업의 수입을 감소하는 비율로 증가시키는 누진적인 판매세와 같은 에너지절약기업의 수입에 대한 제약이 존재한다면, 최적 분배 비율은 선형 보상 체계에서 'I'보다 작은 수준에서 유일하게 결정된다는 것을 알게 되었다. 즉 유일한 균형이 존재한다는 것이다. 부분게임 각각의 경우에 대한 자기충족적인 유일한 균형은 분리균형인 바, 이 균형에서 에너지사용자는 높은 기술수준을 보유하고 있는 에너지절약기업(H형 ESCO)의 에너지진단 제안은 받아들이되, 낮은 기술수준을 보유한 에너지절약기업(L형 ESCO)의 진단제안은 거절한다. L형 ESCO는 제3자 재원조달 시장에서 수익을 창출할 수 없게 된다. 반면, H형 ESCO는 L형과 H형의 진단수수료의 차이만큼 수익을 얻게 된다. 따라서 H형 ESCO의 균형에서의 수익은 자신의 기술수준뿐만 아니라 L형보다 더 빠르게 진보된 기술수준을 통해서 증가하게 된다. 에너지사용자는 어떠한 추가비용을 지출하지도 않으면서 기존 자신의 에너지시스템에서 ESCO가 3자재원조달 임무를 하도록 허용함으로써 일정분의 수익을 얻게 된다.

  • PDF

대두유와 Glyceryl Monooleate의 효소적 반응을 이용한 Diacylglycerol 함유 유지의 생산 (Production of Diacylglycerol-Oil from Lipase-Catalyzed Reaction Using Soybean Oil and Glyceryl Monooleate)

  • 전미선;이초롱;이기택
    • 한국식품영양과학회지
    • /
    • 제38권11호
    • /
    • pp.1559-1563
    • /
    • 2009
  • SBO와 GMO의 몰비율 1:2의 기질에 Lipozyme RMIM을 총 기질 질량의 10%를 사용하여, impeller를 장착한 회분식반응기를 통해 DAG 함유 유지의 대량합성을 실시하였다. 반응시작 후 1 hr부터 6 hr까지 total DAG의 함량은 25.4-27.7 g/100 g oil로 나타났으며, 6 hr 반응하였을 때 TAG의 함량은 32.2 g/100 g oil으로 감소하였다. 반응 완료 후 분자증류를 통해 MAG와 FFA를 제거하였으며 NP-HPLC를 통해 분자증류 전과 후의 TAG와 DAG 함량변화를 알아보았다. 분자증류 전의 TAG와 DAG의 함량은 각각 7, 59 area%였으며, 분자증류 후에는 각각 29, 71 area%로 나타나 TAG와 DAG의 함량이 분자증류를 하기 전보다 증가함을 알 수 있었다. 분자증류를 거친 DAG 함유 유지의 주요한 지방산은 C18:1과 C18:2로 그 함량은 각각 44.36%와 37.36%로 나타났으며, trans 지방산의 함량은 1.72%로 나타났다. 그리고 분자증류를 거친 DAG 함유 유지의 산가와 요오드가는 각각 0.13과 112.6이었다. SFC분석 결과, 분자증류를 거친 DAG 함유 유지는 SBO보다 높은 온도인 25$^{\circ}C$에서 대부분 융해되는 것을 알 수 있었으며, 융점 피크는 -25.0, 0.1, 11.2$^{\circ}C$ 에서 나타났고, 결정화 피크는 -16.2$^{\circ}C$ 에서 보였다.

비탈면 경사 변화에 따른 토석류 거동의 수치모의 (Numerical Simulation for Behavior of Debris Flow according to the Variances of Slope Angle)

  • 김성덕;윤일로;오세욱;이호진;배우석
    • 한국지반환경공학회 논문집
    • /
    • 제13권6호
    • /
    • pp.59-66
    • /
    • 2012
  • 본 연구의 목적은 다양한 경사를 가진 비탈면에서 토석류의 거동과 메카니즘을 평가하는 것이다. 수치모의는 질량보존 및 운동량 보존에 관한 방정식에 기초하여 유한차분법을 이용하여 수행되었다. 토석류 유동 메카니즘은 토석류, 소류집합유동, 소류이동 등의 3가지 형태로 나눌 수 있다. 우선 하류부에서 공급유량의 변화에 따른 직선 사면과 2단 경사 사면에 대한 유량, 유동심, 토사체적 농도를 조사하였다. 공급유량이 적을수록 토석류가 도달한 직후에만 유량과 유동심의 상승이 있었고, 이후 감소하는 경향을 나타내지만, 공급유량의 증가로 인해 유량과 유동심의 곡선이 불안정하면서 높게 나타났다. RMS비 비교 결과 2단 경사 비탈면이 직선 비탈면보다 유량과 유동심이 적게 나타난 것을 확인하였다. 둘째, 2단 경사 비탈면에서 하류부의 경사각도 변화에 따른 유량, 유동심, 토사체적 농도를 조사하였다. 하류부 경사각도 $14^{\circ}$$16^{\circ}$사이의 유량과 유동심 곡선의 밴드폭이 다른 각도 사이보다 크게 나타났으며, 10초 이후에는 높은 값의 파동이 지속된다는 것을 확인하였다.

면내(面內) 모멘트를 받는 단순지지된 두 모서리와 자유경계인 나머지 두 모서리를 갖는 직사각형 판의 진동과 좌굴의 엄밀해 (Exact Solutions for Vibration and Buckling of Rectangular Plates Loaded at Two Simply-Supported Opposite Edges by In-Plane Moments, Free along the Other Two Edges)

  • 심현주;우하영;강재훈
    • 한국공간구조학회논문집
    • /
    • 제6권4호
    • /
    • pp.81-92
    • /
    • 2006
  • 본 연구는 순수 면내모멘트를 발생시키는 선형적으로 변하는 수직응력을 받고 있는 단순지지된 마주보는 두 모서리와 자유경계를 가지는 직사각형 판의 자유진동과 좌굴의 엄밀해를 구하였다. 정현적으로 가정된 하중방향(x)으로의 변위함수는 단순지지 경계조건을 만족시키며, 평판을 지배하는 편미분 운동방정식 을 y 방향으로의 변계수를 갖는 상미분방정식으로 만든다. Frobenius법을 통하여, y방향으로의 멱급수를 가정하면 이 식을 엄밀하게 풀 수 있으며, 그 식의 합당한 계수를 구할 수 있다. 자유경계조건을 y=0과 b에 적용하면, 고유진동수와 임계좌굴모멘트를 구할 수 있는 4차의 특성행렬식이 만들어진다. 본 논문에서는 이 급수해의 수렴성이 면밀히 조사되었으며, 임계 좌굴모멘트의 수치결과와 모드형상이 주어진다. 상대적으로 정확도가 떨어지는 1차원적인 보 이론으로 구한 결과치와의 비교연구가 이루어진다. 또한 자유진동수와 모드형상 주어진다. 프와송비(v)의 변화에 따른 좌굴모멘트와 고유진동수의 변화가 도표로 주어진다.

  • PDF

병류흐름 중공사 분리막에 의한 메탄 분리 수치해석 (Numerical Analysis for Separation of Methane by Hollow Fiber Membrane with Cocurrent Flow)

  • 이승민;서연희;강한창;김정훈;이용택
    • Korean Chemical Engineering Research
    • /
    • 제53권3호
    • /
    • pp.295-301
    • /
    • 2015
  • 폴리설폰 분리막을 이용한 바이오 메탄 가스 농축 특성을 이론적 방법으로 분석하였다. 병류 흐름 분리막 공정의 지배 방정식을 유도하고 Compaq Visual Fortran 6.6 소프트웨어를 이용하여 유도된 비선형 상미분 방정식을 수치 해석하였다. 공급 메탄 몰분율이 0.7로 주어진 전형적 운전조건에서 분리막 입구로부터 출구로 이동하면서 잔류 측 메탄몰분율은 0.7에서 0.76로 증가하였고 공급유량 대비 잔류유량 비는 1에서 0.79로 감소하였다. 공급 메탄 몰분율 또는 공급 압력이 증가할수록 잔류 측 메탄 몰분율은 증가하였다. 분리막 길이를 고정한 상태에서 분리막 면적이 감소하거나 투과 측 압력 대 공급 측 압력 비가 증가함에 따라 잔류 측 메탄 몰분율이 감소함을 확인하였다. 총 투과 분율이 증가할수록 잔류 측 메탄 몰분율은 증가하였고 메탄 회수율은 감소함을 관찰할 수 있었다.

복층터널의 분기터널 굴착에 따른 지하 공동구의 안정성 분석 (Stability analysis of an existing utility tunnel due to the excavation of a divergence tunnel emerging from double-deck tunnel)

  • 남경민;최민기;김정주;;유한규
    • 한국터널지하공간학회 논문집
    • /
    • 제19권2호
    • /
    • pp.231-248
    • /
    • 2017
  • 서울시는 도심지 교통체증을 해결하기 위해 최근 경부고속도로의 일부 구간을 복층터널로 계획하는 방안을 검토하고 있다. 도심지에 복층터널을 건설할 경우, 교통난 해소뿐만 아니라 말레이시아 스마트 터널과 같이 홍수 시 침수방지를 위한 저류시설로도 활용할 수 있을 것으로 본다. 그러나 도로터널을 복층터널로 계획할 경우에는 각 지역을 연결하는 분기터널이 필요하며, 분기터널은 토피가 낮은 구간에 편평율이 큰 대단면 또는 복잡한 터널 단면형상으로 이루어지게 된다. 이때 토피가 낮은 지역에서는 지하 공동구나 건물 기초 등에 인접하여 위치하게 되며 터널 건설로 인해 지장물에 미치는 영향에 대해 반드시 검토해야 한다. 본 연구에서는 복층터널에서 분기되는 터널 굴착 시, 지하 공동구에 미치는 영향을 수치해석을 통해 분석하였다. 변위조절모델(Displacement Controlled Model)을 이용하여 터널 주변의 지반손실률을 1.0%, 3.0%, 그리고 5.0%까지 모사하였다. 복층터널에서 분기되는 각도를 $45^{\circ}$$36^{\circ}$로 다르게 설정하여 공동구 측면 및 하부로의 접근을 고려할 수 있도록 하였다. 그 결과, 일반적으로 분기터널이 공동구에 근접할수록 그리고 지반손실률이 클수록 변위, 각변위 그리고 안정성에 미치는 영향이 큰 것으로 타나났다. 공동구 바닥부의 침하와 공동구 부재의 안정성에는 이격거리 보다는 공동구의 하부에 근접하여 큰 변위와 부등침하를 유발할 수 있는 각도 $36^{\circ}$, 이격거리 10 m가 가장 취약한 것으로 나타났다. 본 연구를 통해 근접시공 시 구조물의 안정성 평가를 위한 각변위-거리/직경 관계를 제시하였으며, 지하 공동구 안정성에 영향을 미치는 한계 임계 지반손실률을 산정하였다.

Inflammatory Mediators Modulate NK Cell-stimulating Activity of Dendritic Cells by Inducing Development of Polarized Effector Function

  • Kim, Kwang-Dong;Choi, Seung-Chul;Lee, Eun-Sil;Kim, Ae-Yung;Lim, Jong-Seok
    • IMMUNE NETWORK
    • /
    • 제7권3호
    • /
    • pp.133-140
    • /
    • 2007
  • Background: It is well established that cross talk between natural killer (NK) cells and myeloid dendritic cells (DC) leads to NK cell activation and DC maturation. In the present study, we investigated whether type 1-polarized DC (DC1) matured in the presence of IFN-${\gamma}$ and type 2-polarized DC (DC2) matured in the presence of PGE2 can differentially activate NK cells. Methods: In order to generate DC, plastic adherent monocytes were cultured in RPMI 1640 containing GM-CSF and IL-4. At day 6, maturation was induced by culturing the cells for 2 days with cytokines or PGE2 in the presence or absence of LPS. Each population of DC was cocultured with NK cells for 24 h. The antigen expression on DC was analyzed by flow cytometry and cytokine production in culture supernatant was measured by ELISA or a bioassay for TNF-${\alpha}$ determination. NK cell-mediated lysis was determined using a standard 4h chromium release assay. Results: DC2, unlike DC1, had weak, if any, ability to induce NK cell activation as measured by IFN-${\gamma}$ production and cytolytic activity. DC2 were weakly stimulated by activated NK cells compared to DC1. In addition, IFN-${\gamma}$-primed mature DC appeared to be most resistant to active NK cell-mediated lysis even at a high NK cell/DC ratio. On the other hand, PGE2-primed DC were less resistant to feedback regulation by NK cells than IFN-${\gamma}$-primed mature DC. Finally, we showed that the differential effect of two types of DC population on NK cell activity is not due to differences in their ability to form conjugates with NK cells. Conclusion: These results suggest that different combinations of inflammatory mediators differentially affect the effector function of DC and, as a result, the function of NK cells, eventually leading to distinct levels of activation in adaptive immunity.

치과용 아크릴릭 레진의 방사선 불투과도에 관한 연구 - 황산바륨과 요오드 화합물 첨가 - (THE EFFECTS OF BARIUM SULFATE AND IODIDE COMPOUND ON THE CHARACTERISTICS OF DENTAL ACRYLIC RESINS)

  • 이용근;이건일;정성우
    • 치과방사선
    • /
    • 제26권2호
    • /
    • pp.133-145
    • /
    • 1996
  • Aspirating or swallowing foreign bodies is a common occurrence. If they are wholly or partly radiopaque, their localization in and progress through the gastrointestinal tract can be more effective. Of the dental origin foreign materials swallowed, the most common things are fragments of anterior maxillary partial denture. But the radiopacity of denture base resins is not sufficient to determine the location of the objects. The purpose of this study was to develop a radiopaque dental acrylic resin, which has clinically detectible radiopacity with minimal change of mechanical properties and color. The radiopacity, color change(CIE 6..E) and microhardness of acrylic resins were determined after mixing barium sulfate or iodide compound. Thermocycling course was conducted to determine the change of characteristic of resins after using for a long time in the mouth. Five or ten percent of barium sulfate to total weight of cured material was mixed with heat curing dental acrylic resin or chemically curing orthodontic resin. In the case of iodide compound, the mixing ratio was two or three percent. After mixing the high radiopaque materials, resin was cured to 20×20×2 mm plate, polished with #600 sand paper and finally polished with Microcloth(Buehler). The specimens were thermocycled in 5 and 55 t distilled water for 2,000 times, and the measurement of radiopacity, color and Vickers hardness was repeated every 500 times thcrmocycling. The radiopacity of specimens on the X -ray films was measured with densitometer(X-rite). The color change was detennined with differential colorimeter(Model TC-6FX, Tokyo Denshoku), and the Vickers hardness number was measured with microhardness tester(Mitsuzawa). The following results were obtained : 1. All the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, had combined effect on the radiopacity of the dental acrylic resins(p<0.0l). 2. The two variables, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of the dental acrylic resins(p<0.01). But the kinds of acrylic resins did not influence on the color change of mixed dental acrylic resins(p>0.05). 3. Each of the three variables, the kinds of acrylic resins, the mixing or the kinds of high radiopaque materials and thermocycling, influenced on the radiopacity of dental acrylic resins(p<0.0l). 4. The high radiopaque materials used in this study did not yield clinically usable radiopacity, and the color change was great after mixing those materials.

  • PDF