• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.7 s.361
• /
• pp.41-46
• /
• 2007

A novel post-linearization technique is proposed for CMOS cascode low noise amplifier (LNA). The technique uses dual common gate FETs one of which delivers the linear currents to a load and the other one sinks the $3^{rd}$ order intermodulation currents of output currents from the common source FET. Selective current branching can be implemented in $0.18{\mu}m$ CMOS process by using a thick oxide FET as an IM3 sinker with a normal FET as a linear current buffer. A differential LNA adopting this technique is designed at 2.14GHz. The measurement results show 11dBm IIP3, 15.5dB power gain and 2.85dB noise figure consuming 12.4mA from 1.8V power supply. Compared with the LNA with turning off the IM3 sinker, the proposed technique improves the IIP3 by 7.5 dB.

• Journal of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.561-568
• /
• 1990

Voltammetric behavior of some light lanthanide ions (La$^{3+}$, Pr$^{3+}$, Nd$^{3+}$, Sm$^{3+}$, and Eu$^{3+}$) in various supporting electrolytes has been investigated by several electrochemical techniques. The peak potentials and the peak currents, their dependency on the concentration, temperature and pH effects, the reversibility of the electrode reactions are described. The reduction of La$^{3+}$, Pr$^{3+}$ and Nd$^{3+}$ in 0.1 M lithium chloride proceeds by a three-electron change directly to the metallic state (Ln$^{3+}$ ＋ 3e- → Ln$^0$) and charge transfer is totally irreversible. However, the reduction of Sm$^{3+}$ in 0.1 M tetramethylammonium iodide and Eu$^{3+}$ in 0.1 M lithium chloride proceeds in two stages (Ln$^{3+}$ ＋ e- → Ln$^{2+}$ and Ln$^{2+}$ ＋ 2e- → Ln$^0$). At pH values lower than ca.4 the hydrated lanthanide species (Ln(OH)$^{2+}$) reduced before the lanthanide ions (Ln$^{3+}$) due to the catalytic effect of hydrogen ions, and peak current increase with in the order Eu$^{3+}$ < Sm$^{3+}$ < Nd$^{3+}$ < Pr$^{3+}$ < La$^{3+}$ in differential pulse polarography. Some representative plots of $i_{pc}V^{-1/2} (proportional to current function) vs. V show considerable influence of hydrogen ion/lanthanide ion concentration in cyclic voltammetry. It is shown that a reaction of lanthanide ions with proton and/or water and catalytic reaction is enhanced at lower pH and at decreased lanthanide ion concentration.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.175-180
• /
• 2010

In the almost application parts, GNSS being used the primary navigation system on world-widely. However, some of nations attempt or deliberate to enhance current Loran system, as a backup to satellite navigation system because of the vulnerability to the disturbance signal. Loran interests in supplemental navigation system by the development and enhancement, which is called eLoran, and that consists of advancement of receiver and transmitter and of differential Loran in order to increase the accuracy of current Loran-C. A significant factor limiting the ranging accuracy of the eLoran signal is the ASF in the TOAs observed by the receiver. The ASF is mostly due to the fact that the ground-wave signal is likely to propagate over paths of varying conductivity and topography. This paper presents comparison results between the predicted ASF and the measured ASF in a southern east region of Korea. For predicting ASF, the Monteath model is used. Actual ASF is measured from the legacy Loran signal transmitted Pohang station in the GRI 9930 chain. The test results showed the repeatability of the measured ASF and the consistent characteristics between the predicted and the measured ASF values.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.819-824
• /
• 2016

The accelerated thermal aging of CSPE (chlorosulfonated polyethylene) was carried out for 33.64 and 67.27 days at 110[$^{\circ}C$], equivalent to 40 and 80 years of aging at 50[$^{\circ}C$], respectively. These samples were referred to as CSPE-0y, CSPE-40y and CSPE-80y, respectively. As the accelerated thermally aged years of the CSPE increase, the insulation resistance[$\Omega$] at 20[Hz], 500[Hz], and 2[KHz], and the percent elongation [%EL] of the CSPE decrease. However, the dissipation factor($tan{\delta}$) at 20[Hz], 500[Hz], and 2[KHz], the apparent density[$g/cm^3$], the glass transition temperature and the melting temperature of the CSPE were increased. The period of time that the voltage has to be applied until electric breakdown of the CSPE-0y is longer than that of the CSPE-40y, and the CSPE-80y, but the dielectric strength of the CSPE-80y is lower than that of the CSPE-0y and the CSPE-40y. The differential temperatures after the AC and DC voltages are applied to CSPE-0y, CSPE-40y and CSPE-80y are 0.026~0.028[$^{\circ}C$], 0.030~0.042[$^{\circ}C$], 0.018~0.045[$^{\circ}C$], respectively. The variations of temperature for the AC voltage are higher than those for the DC voltage when an AC voltage is applied to CSPE-0y, CSPE-40y and CSPE-80y. It is found that the dielectric loss owing to the dissipation factor[$tan{\delta}$] is related to the electric dipole conduction current. It is ascertained that the ionic (electron or hole) leakage current is increased by the separation of the branch chain of CSPE polymer from the main chain of the polyethylene as a result of thermal stress due to accelerated thermal aging as well as by conducting ions such as $Na^+$, $Cl^-$, $Mg^{2+}$, $SO_4^{2-}$, $Ca^{2+}$ and $K^+$ after seawater soaking.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.249-256
• /
• 2019

This paper presents an optimization framework of electrical impedance tomography for characterizing electrical conductivity profiles of concrete structures in two dimensions. The framework utilizes a partial-differential-equation(PDE)-constrained optimization approach that can obtain the spatial distribution of electrical conductivity using measured electrical potentials from several electrodes located on the boundary of the concrete domain. The forward problem is formulated based on a complete electrode model(CEM) for the electrical potential of a medium due to current input. The CEM consists of a Laplace equation for electrical potential and boundary conditions to represent the current inputs to the electrodes on the surface. To validate the forward solution, electrical potential calculated by the finite element method is compared with that obtained using TCAD software. The PDE-constrained optimization approach seeks the optimal values of electrical conductivity on the domain of investigation while minimizing the Lagrangian function. The Lagrangian consists of least-squares objective functional and regularization terms augmented by the weak imposition of the governing equation and boundary conditions via Lagrange multipliers. Enforcing the stationarity of the Lagrangian leads to the Karush-Kuhn-Tucker condition to obtain an optimal solution for electrical conductivity within the target medium. Numerical inversion results are reported showing the reconstruction of the electrical conductivity profile of a concrete specimen in two dimensions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.309-316
• /
• 2019

In this paper, a low-jitter delay-locked loop that compensates for local clock skew is presented. The proposed DLL consists of a phase splitter, a phase detector(PD), a charge pump, a bias generator, a voltage-controlled delay line(VCDL), and a level converter. The VCDL uses self-biased delay cells using current mode logic(CML) to have insensitive characteristics to temperature and supply noises. The phase splitter generates two reference clocks which are used as the differential inputs of the VCDL. The PD uses the only single clock from the phase splitter because the PD in the proposed circuit uses CMOS logic that consumes less power compared to CML. Therefore, the output of the VCDL is also converted to the rail-to-rail signal by the level converter for the PD as well as the local clock distribution circuit. The proposed circuit has been designed with a $0.13-{\mu}m$ CMOS process. A global CLK with a frequency of 1-GHz is externally applied to the circuit. As a result, after about 19 cycles, the proposed DLL is locked at a point that the control voltage is 597.83mV with the jitter of 1.05ps.

• Korean small business review
• /
• v.43 no.1
• /
• pp.1-33
• /
• 2021

This study explores differential value implications of R&D expenditure across firms, especially in terms of growth potential of small businesses. Analyzing Korean listed firms for the period from 1982 to 2014, we document the followings. First, large firms, defined as the top quintile group based on market capitalization, have spent higher R&D expenditure compared to small (bottom quintile group) and medium (middle quintile groups) firms and the difference between groups has enlarged over time. Relatedly, the persistence of R&D spending, measured by the association between current R&D expenditure and cumulative future R&D expenditure over the next five years, is lowest in small firms. Second, R&D of large (small) firms are more (less) likely to generate operating profits over the next five years. Additional analyses suggest that the relation between R&D and gross margin is strongest in large firms, suggesting that R&D underlies their competitiveness in the product market. Third, small firms have borne the highest uncertainty related to R&D investment proxied by the association between current R&D and volatility of future earnings. As a result, the likelihood of R&D leading to future patents is also lowest in small firms. Fourth, the probability of moving up to the next size group within the next five years is significantly lower in small firms than others. Finally, we find that the divergence in R&D expenditure between large and small firms is positively associated with product market concentration. Overall, our findings confirm the small business growth trap in relation to R&D investment.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.292-304
• /
• 2011

The purpose of this study is to draw institutional implications for tree cutting permit system improvement in comparison with Korea and foreign countries (German, Japan). A survey about recognition of cutting system and cutting-invigorating factors for two groups in charge of work for cutting permit (forest-official) and cutting operation (forest owner, tree butcher, forestry association, and forestry corporation) was carried out. The survey provides basic information which is necessary to improve current cutting system. The result of analysis about both German and Japan's cutting system show that clear cutting area to hinder function of forests tends to decrease and flexible final age of maturity considering condition of regional forest not uniform cutting age were applied. As a result of German and Japan's cutting system review flexible cutting system on regional characteristics is used to manage for the purpose of forest regeneration. The survey result about awareness and invigorating factors of cutting system represents that only public official group said final age of pine tree (3.13) and cedar (3.05) was proper and final age of other species of trees should have shortened. In matters of cutover area, current standard is less than 5ha per a felling area and the largest total area limit is 30 ha, only tree butcher, forestry corporation said cutover area must expand. Invigorating factors of current cutting system are reinforcement of cutover area, facility support, enrichment of technical training, increase of equipment support, simplification of administrative procedures, and provision of various benefits. The reinforcement of technical training among them especially represents the statistical significance of the participants' differential recognition.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.5
• /
• pp.516-522
• /
• 2006

Background : In contrast to tuberculous pleurisy, tuberculous empyema is a chronic active infectious disease of the pleural cavity that is frequently accompanied by cavitary or advanced pulmonary lesions. The condition requires long-term anti-tuberculous medication with external drainage. The clinical features and treatment outcome of tuberculous empyema are unclear despite the high prevalence of tuberculosis in Korea. Methods : From January 1991 through April 2004, 17 patients diagnosed with tuberculous empyema in Kyungpook National University Hospital were enrolled in this study. Their medical records and chest radiographs were reviewed. Results : Twelve patients(71%) had a history of tuberculosis and six of the 12 patients were under current anti-tuberculous medication. Productive cough, fever, and dyspnea were the main complaints. There was no predominance between the right and left lungs. Nine patients(53%) had far-advanced pulmonary tuberculosis, two(12%) had a cavitary lesion, and seven(41%) had a pyopneumothorax on the chest radiograph. All eight cases in whom the data of pleural fluid WBC differential count was available showed polymorphonuclear leukocyte predominance. Eight patients(47%) had other bacterial infections as well. The overall rates of a positive sputum AFB smear and culture for M. tuberculosis were 71% and 64%, respectively. The positive AFB smear and culture rates for M. tuberculosis from the pleural fluid were 33% and 36%, respectively. Twelve of the 16 patients(75%) were treated successfully. Three underwent additional surgical intervention. Two patients (12%) died during treatment. Conclusion : Tuberculous empyema is frequently accompanied by advanced pulmonary lesions, and polymorphonuclear leukocytes are predominant in the pleural fluid. Other accompanying bacterial infections in the pleural cavity are also common in tuberculous empyema patients. Therefore, tuberculous empyema should be considered in differential diagnosis of patients with polymorphonuclear leukocyte-predominant pleural effusion. In addition, more active effort will be needed to achieve a bacteriological diagnosis in the pleural fluid.

• Journal of The Korean Association For Science Education
• /
• v.35 no.1
• /
• pp.37-52
• /
• 2015

In this study, assessment items to examine geocognition on plate tectonics were developed and applied to middle and high school students and college students. Conceptual constructs on plate tectonics are Earth interior structure, specific geomorphology, and geologic phenomena at each plate boundary. Construct for geocognition included temporal reasoning, spatial reasoning, retrospective reasoning, and system thinking. Pictorial data in each item were all obtained from GeoMapApp. Students' responses to the items were analyzed and measured cross-sectionally by Rasch model, which distinguishes persons' ability levels based on their scores for all items and compared them with item difficulty. By Rasch model analysis, Wright maps for middle and high school students and college students were obtained and compared with each other. Differential Item Functioning analysis was also implemented to compare students' item responses across school grades. The results showed: 1) Geocognition on plate tectonics was an assessable construct for middle and high school students in current science curriculum, 2) The most distinguished geocognition factor was spatial reasoning based on cross sectional analysis across school grades, 3) Geocognition on plate tectonics could be developed towards more sophisticated level through scaffolding of relevant instruction and earth science content knowledge, and 4) Geocognition was not a general reasoning separated from a task content but a content-specific reasoning related to the content of an assessment item. We proposed several suggestions for learning progressions for plate tectonics and national curriculum development based on the results of the study.