• 한국의류학회지
• /
• 제22권4호
• /
• pp.452-459
• /
• 1998

The purpose of this study was to discover a conceptual framework and evaluation process of apparel quality by means-end chain theory. The theoretical study was conducted to find out a conceptual framework and build a hypothetical evaluation process model of apparel quality. Apparel quality was perceived associative network called a means-end chain and was evaluated in several stages. A conceptual framework of apparel quality evaluation was organized into hierarchical relationships among four different dimensions: physical attribute, physical function, instrumental performance, and expressive performance. The means-end structure linked tangible physical attributes and function to more abstract instrumental and expressive performance. A hypothetical evaluation process model linked dimensions of apparel quality to the selected means-end relationship. Different consumers had different means-end chains for the same apparel. Therefore different subjects are likely to have different evaluation paths. From this study we can suggest an evaluation process model of apparel quality.

• 한국주거학회논문집
• /
• 제17권3호
• /
• pp.79-87
• /
• 2006

The purpose of this study is to propose an architectural design process adopting design concepts with weight on them. The process of the study is as follow; First, design concepts for the study are classified by the hierarchy. Developing process of those design concepts which had been adopted for a creative thinking was investigated. Second, after putting different weight on diverse design concepts, this study propose a design process adopting design concepts with different weight. Finally, the proposed process adopting design concepts with weight was verified through a case study of elementary school project. The case study was carried out by questionnaires 3 times. Experimental results verified the hypothesis which was about the process adopting design concepts with different weight. Architects can precede their design process with confidence about setting design concepts by the result of this study.

• 소성∙가공
• /
• 제17권6호
• /
• pp.429-435
• /
• 2008

In this paper, the serrated forming process is analyzed with finite element method. The seal should secure the overlapping portions of ligature, which has teeth for ligature to prevent from slipping each other after clamping. In the simulation, rigid-plastic finite element model has been applied to the serration forming process. Serration or teeth forming characteristics has been analyzed numerically in terms of teeth geometry based on different forming conditions. Analyses are focused to find the influence of different die movements and geometries on the tooth geometry, which is crucial for securing overlapping portions of ligature. Two major process variables are selected, which are the face angle and entry angle of punch, respectively. Extensive investigation has been performed to reveal the influences of different entry and face angles on the geometry of teeth formation in the simulation. Three different face angles of punch have been selected to apply to each simulation of serrated sheet forming process with every case of punch entry angles. Furthermore, tooth geometries predicted from simulation have been applied to the indention process for comparing proper tooth geometries to secure the sealing.

• 소성∙가공
• /
• 제7권6호
• /
• pp.519-529
• /
• 1998

In automotive industries the stamping of laser-welded blank gives many merits which bring about dimensional accuracy, strong body assembly and high productivity. However the welding of blanks with different thickness or/and different strength materials introduces many challenging formability problems for process development and tool design. in this paper the deformation characteristics for deep drawing process of laser-welded blank with different thickness sheets are investigated by experiment as well as by FEM simulation. The blank holding force ratio to avoid the movement of weld line was suggested and compared with the experimental result for cylindrical and rectangular cup drawing process. The optimal location of weld line in laser-welded blank with different thickness sheets is calculated to compensate for the movement of weld line on deep drawing process. In addition the effect of location of weld line on formability is clarified using FEM simulation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.289.1-289.1
• /
• 2016

Germanium (Ge) with higher carrier mobility and a lower crystallization temperature has been considered as the channel material of thin-film transistors for display applications. Various methods were studied for crystallizaion of poly-Ge from amorphous Ge at low temperature. Especially Metal induced crystalliazation (MIC) process was widely studied because low process cost. In this paper, we investigate copper diffusion process of different thick (70 nm, 350 nm) poly-Ge film obtained by MIC process at various temperatures (250, 300, and $350^{\circ}C$) through atomic force microscopy (AFM), Raman spectroscopy, and secondary ion mass spectroscopy (SIMS) measurement. Crystallization completeness and grain size was similar in all the conditions. Copper diffusion profile of 370 nm poly-Ge film show simirly results regardless of process temperature. However, copper diffusion profile of 70 nm poly-Ge film show different results by process temperature.

• 한국연초학회지
• /
• 제25권1호
• /
• pp.27-33
• /
• 2003

This study was conducted to determine the changes of nitrogen compounds in lamina and midrib during the curing process with the different curing methods, such as priming and stalk-cut curing. After KB 108 burley tobacco was cultivated by the different fetilization levels such as standard and 20% higher, only the tips and leaf were harvested. Though the contents of total alkaloid and total nitrogen were similar in lamina, midrib showed a very low contents of those components by the different curing method and fertilization levels. The content of nitrate-nitrogen in lamina increased during a middle of curing process, and then these compound was decreased during an end of curing process by stalk-cut curing method. Nitrate-nitrogen contents in the lamina by the priming curing showed a high level caused by rapid drying process during an end of curing process. That component in midrib was 5-6 times higher than that of lamina. The contents of ammonia-nitrogen in the lamina and midrib were increased during a curing process. Though those amount in tips showed a similar by a different fetilization and curing method, midrib of stalk-cut curing showed a slow increasing during a curing process.

• 소성∙가공
• /
• 제19권6호
• /
• pp.329-336
• /
• 2010

Ring forging process is more appropriate for high-length and thin walled ring, because it utilizes the forging press and hence does not require heavy-duty ring rolling mill. Although ring forging process is very simple and economic for facilities, the process is not efficient because of multi-forging-step and low material utilization. An effective ring forging process is developed using a hollow ingot. When a hollow ingot is used with a workpiece, the ingot can be forged into a final ring without multi-stage pre-forging process, such as, cogging, upsetting, and piercing, etc.. Finally it has advantages of the material utilization and process improvement because a few reheating and forging process are not necessary to make workpiece for ring forging. The important design variables are the applied plastic deformation energy to eliminate cast structure and make uniform properties. In this study, the mechanical properties after forging of hollow cast ingot were investigated from the experiment using circumferential sectional model. Also, the effects of process variables were studied by FEM simulation on the basis of thermo-visco-plastic constitutive equation. Applied strain is different at each position in length direction because diameter of hollow ingot is different in length direction. The different strain distribution become into a narrow gap by additional plastic deformation during diameter extension process.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.301-304
• /
• 2015

With the experiment observation of single particle combustion, this model is built for the numerical analysis of the process. It's about the single coal particle combustion process under different conditions with reasonable assumptions. The model can express the mass, radius, density, temperature changing with different particle sizes, oxygen concentration and gas temperature. It also includes the flame sizes change in different condition and the diffusion of each species. The result shows the characters of the combustion.

• 대한본초학회지
• /
• 제33권1호
• /
• pp.85-91
• /
• 2018

Objectives : This study was carried out to evaluate the quality of different drying methods and different roots(primary root and lateral root) of Angelica gigas Nakai. Methods : The experimental method was performed according to the Korea Pharmacopoea Eleventh edition (KP11). Loss on drying, ash, acid insoluble ash, ethanol extract, nodakenin and total decursin contents were tested to evaluate the quality of root tissue of Angelica gigas Nakai. In addition, the treatment of different root parts were prepared in two groups of washing dry process and natural dry process. Results : In comparison of dry processing methods, total contents of nodakenin and total decursin in the primary root and lateral root through washing dry process were ranged from 3.55 to 4.09% and from 5.18 to 6.13%, respectively. And also, those of roots from the natural dry process were from 4.36 to 6.22% and from 6.28 to 8.34%, respectively. In the washing dry process and natural dry process methods, 47.9% and 22.3% higher amount of nodakenin and total decursin were measured in lateral root compared to primary root. In common, lateral roots accumulated higher contents of nodakenin and total decursin compared to primary roots, and samples drying processed with natural dry process compared to washing dry process method contained higher amount of compounds. Conclusions : We sincerely hope that this study will be contributed to the standardization and quality control of Angelica Gigas Root.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.173-183
• /
• 2009

Knowledge management (KM) is one of the useful management tools in today's project management (PM) practice, such as construction projects. Nobody can deny the importance of "useful knowledge" always helps organizations and project managers shaping a decision. Due to the trend of globalization, it is now very common that an organization may comprise employees from different countries of distinct national-cultures working together. It is also not uncommon that different projects, within an organization, may have their own organizational-cultures which influence its knowledge repository, transfer process and knowledge strategy. Therefore, it is extremely difficult to align all these cultures and consolidate them to benefit the KM process and PM practice. Organizations and project managers understand that different national-cultural and organizational-cultural factors will create impact on the philosophy of KM process which will subsequently affect PM practice. Those factors may affect interpersonal relations and exchange of knowledge between projects and amongst staff. Systematic KM process can utilize the goodness of different employees from distinct cultures which can eventually drive the organization and projects to success. The purpose of this paper, based upon a case study of a Hong Kong construction company, is to discuss how those cultural factors are linked to KM and what organization and project managers can do to improve the KM process and PM practice.