• 제목/요약/키워드: Different light conditions

검색결과 847건 처리시간 0.046초

가시광선과 아르곤 레이저에 의한 복합레진 중합 효과의 비교 연구 (A COMPARATIVE STUDY OF THE EFFECTIVENESS IN POLYMERIZATION OF COMPOSITE RESIN CURED WITH VISIBLE LIGHT AND ARGON LASER SOURCE)

  • 전상언;김용기
    • 대한소아치과학회지
    • /
    • 제23권2호
    • /
    • pp.327-346
    • /
    • 1996
  • The purpose of this study was to evaluate the shear bond strengths, microhardness, compressive strength and contraction gap at the resin-tooth interface of two types of composite resins polymerized with visible light and argon laser sourse. The results from the present study can be summarized as follows ; 1. Resin samples polymerized either by argon laser or visible light did not show significant difference in their physical properties tested(p>.05). 2. The contraction gap at the resin tooth interface was found to be present in all samples but any significant difference between groups could not be established due to their variability. Although the superiority of argon laser over visible light in enhancing the physical properties of resin could not be elucidated in the present study, continous efforts are deemed to be worthwhile to investigate this area using different conditions and materials of experiment.

  • PDF

Induction Motor with Adjustable Windings for High Efficiency Drive in Light Load Operation

  • Zhang, Y.
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권2호
    • /
    • pp.508-513
    • /
    • 2014
  • Heavy load start but light load operation is a common case in practical drive applications. When an induction motor is employed for such applications, its rated power is usually chosen according to the heavy load start. Then, during light load operation, its efficiency and power factor are low. To solve this problem, it is proposed to adjust the motor windings from the startup to the normal operation conditions. In this paper, arrangement of the adjustable windings is introduced, air gap field with different windings is investigated, and steady state operation performance under various loads is examined. It can be seen that by using proper winding arrangement both startup and operation performances are satisfactory.

Photocatalysis of Low Concentration of Gaseous-Phase Benzene Using Visible-Light Irradiated N-doped and S-doped Titanium Dioxide

  • Jo, Wan-Kuen;Kim, Jong-Tae
    • Environmental Engineering Research
    • /
    • 제13권4호
    • /
    • pp.171-176
    • /
    • 2008
  • Studies on visible-light-driven photocatalysis of air pollutants at indoor air quality (IAQ) levels have been limited. Current study investigated visible-light derived photocatalysis with N-doped and S-doped titanium dioxide ($TiO_2$) for the control of benzene at indoor levels. Two preparation processes were employed for each of the two types of photocatalyst: urea-Degussa P-25 $TiO_2$ and titania-colloid methods for the N-doped $TiO_2$; and titanium isopropoxid- and tetraisopropoxide-thiourea methods for the S-doped $TiO_2$. Furthermore, two coating methods (EDTA- and acetylacetone-dissolving methods) were tested for both the N-doped and S-doped $TiO_2$. The two coating methods exhibited different photocatalytic degradation efficiency for the N-doped photocatalysts, whereas they did not exhibit any difference for the S-doped photocatalysts. In addition, the two doping processes showed different photocatalytic degradation efficiency for both the S-doped and N-doped photocatalysts. For both the N-doped and S-doped $TiO_2$, the photocatalytic oxidation (PCO) efficiency increased as the hydraulic diameter (HD) decreased. The degradation efficiency determined via a PCO system with visible-light induced $TiO_2$ was lower than that with UV-light induced unmodified $TiO_2$, which was obtained from previous studies. Nevertheless, it is noteworthy that for the photocatalytic annular reactor with the HD of 0.5 cm, PCO efficiency increased up to 52% for the N-doped $TiO_2$ and 60% for the S-doped $TiO_2$. Consequently, when combined with the advantage of visible light use over UV light use, it is suggested that with appropriate HD conditions, the visible-light-assisted photocatalytic systems can also become an important tool for improving IAQ.

Influence of Stocking Density with Different Light System on the Growth Performance and Behavior in Broiler Chickens

  • Lim, Chun Ik;Rana, Md Masud;Choi, Il Bok;Ryu, Kyeong Seon
    • 한국가금학회지
    • /
    • 제46권4호
    • /
    • pp.297-304
    • /
    • 2019
  • This study evaluated the effects of stocking density on performance and behavioral activities of 35-day-old broilers in relation to incandescent white bulb (IB) light and LED yellow and white light. A total of 1,650 day-old chicks were weighed and randomly allocated into six treatment groups in a 2 × 3 factorial arrangement based on stocking density (14 birds m-2 and 22 birds m-2) and color of lights (IB; monochromatic LED yellow and white light) with five replicates for each treatment. The results showed that final body weight, weight gain and feed conversion of broilers were improved at a stocking density of 14 birds m-2 with exposure to LED lights. Similarly, broilers spent more time exhibiting inactive behavior (e.g. standing) and active behaviors (e.g. walking and walking plus pecking) under 14 birds m-2 with exposure to lights as compared that of other treatment groups. Regarding a stocking density of 22 birds m-2, broilers performance traits were negatively affected and also activities were less. The performance of broilers was not significantly altered for the main factor of different lights but broilers were less inactive (e.g less time spent sitting plus standing) and more time spent active behavior in walking under IB light than LED light. Thus, we concluded that a stocking density 14 birds m-2 with exposure to LED light significantly improved broiler performance and behavioral activity and these conditions could therefore improve the overall welfare of farmed chickens.

인공광 식물공장내 광질 제어가 작물생육에 미치는 영향 (Effects of Light-Quality Control on the Plant Growth in a Plant Factory System of Artificial Light Type)

  • 허정욱;백정현
    • 한국환경농학회지
    • /
    • 제40권4호
    • /
    • pp.270-278
    • /
    • 2021
  • BACKGROUND: Horticultural plant growth under field and/or greenhouse conditions is affected by the climate changes (e.g., temperature, humidity, and rainfall). Therefore investigation of hydroponics on field horticultural crops is necessary for year-round production of the plants regardless of external environment changes under plant factory system with artificial light sources. METHODS AND RESULTS: Common sage (Salvia plebeia), nasturtium (Tropaeolum majus), and hooker chive (Allium hookeri) plants were hydroponically culturing in the plant factory with blue-red-white LEDs (Light-Emitting Diodes) and fluorescent lights (FLs). Leaf numbers of common sage under mixture LED and FL treatments were 134% and 98% greater, respectively than those in the greenhouse condition. In hooker chives, unfolded leaf numbers were 35% greater under the artificial lights and leaf elongation was inhibited by the conventional sunlight compared to the artificial light treatments. Absorption pattern of NO3-N composition in hydroponic solution was not affected by the different light qualities. CONCLUSION(S): Plant factory system with different light qualities could be applied for fresh-leaf production of common sage, nasturtium, and hooker chive plants culturing under field and/or greenhouse. Controlled light qualities in the system resulted in significantly higher hydroponic growth of the plants comparing to conventional greenhouse condition in present.

매듭풀 ( Kummerowia striata ( Thunb. ) Schindl. ) 개체군의 질소고정활성과 생육특성의 계절변화 (Seasonal changes of nitrogen fixation and growth characteristics of kummerowia striata(thunb)schindl. populations)

  • Song, Seung-Dal;Bae, Sang-Mee
    • The Korean Journal of Ecology
    • /
    • 제15권4호
    • /
    • pp.377-386
    • /
    • 1992
  • Seasonal changes of symbiotic nitrogen-fixation activity and growth characteristics of four different natural populations of kummerowia striata were quantitatively analyzed during the growing period. the nitrogen-fixation activity of root nodules attained the maximum rates of 148, 132, 102 and 100$\muM\;C_2H_4\;\cdot\;g\;fw\;nodule^{-1}\;\cdot\;hr^{-1}$, respectively for sunny, multibranched, shade and unibranched populations at the optimum growth conditions. and the seasonal changes showed fluctuations by environmental conditions such as light, temperature, nutrient contents, water stress and plant ages, etc. The multibranched plant showed the greater amount of leaf and root nodule biomass, and the higher nitrogenase activity than the unibranched plant. the optimum conditions of leaf chloropht11 and water content of each organ indicated the active growth and the maximum fresh biomass of 4 different populations were 1.92, 1.85, 0.97 and 0.56 g $fw\cdotplant^{-1}$ for shade multibranched, sunny and unibranched populations, respectively.

  • PDF

Changes in Body Growth and Growth-Related Genes under Different Photoperiods in Olive Flounder, Paralichthys olivaceus

  • Kim, Byeong-Hoon;Lee, Chi-Hoon;Choi, Song-Hee;Lee, Young-Don
    • 한국발생생물학회지:발생과생식
    • /
    • 제23권2호
    • /
    • pp.149-160
    • /
    • 2019
  • This study examined the effects of different photoperiod conditions on olive flounder (Paralichthys olivaceus), a commercially important species in Korea. Daily variations in the expression of mRNA for the growth-related genes arylalkylamine N-acetyltransferase2 (AANAT2), preprosomatostatin1 (PSS1), and growth hormone (GH) were examined under a 12 h light:12 h dark photoperiod. All the genes were expressed at higher level during the dark period. Melatonin injections increased the expression of GH, but did not significantly affect the expression of PSS. Under short-day conditions (10 h:14 h), the fish gained more weight than under long-day conditions (14 h:10 h). A long nighttime induced melatonin secretion and increased the expression of GH mRNA, promoting weight gain in this species. Therefore, we thought that the long day condition in raising olive flounder may be effective in inducing body growth.

UV-assisted surface modification of polyethersulfone (PES) membrane using TiO2 nanoparticles

  • Singh, Shruti;Karwa, Vinay;Marathe, K.V.
    • Membrane and Water Treatment
    • /
    • 제9권6호
    • /
    • pp.393-403
    • /
    • 2018
  • In this research commercial polyethersulfone (PES) membrane was modified using $TiO_2$ nanoparticles (P-25 Degussa) and further irradiated using UV light to overcome the hydrophobicity and fouling nature of the membrane. Further the membranes were characterized using SEM and FTIR. Contact angle measurements study confirmed the hydrophilic tendency of the modified membrane by decreasing the contact angle from $73^{\circ}$ to $20.28^{\circ}$. The modified membranes showed higher flux and better anti-fouling properties as compared to the unmodified counterparts. The optimum conditions were found to be 0.5 wt% $TiO_2$ loading with 60 min membrane immersion and 10 min UV light illumination. The effect of different pH conditions of feed was analysed. Real wastewater filtration experiments also indicated better performance of modified membranes as opposed to neat PES membranes.

가열 후 냉각조건에 따른 골재 종류별 고강도 콘크리트의 역학적 특성 평가 (Evaluation on Mechanical Properties of High Strength Concrete according to the Aggregate Type and after Heating Cooling Conditions)

  • 윤종일;김규용;남정수;최경철;윤민호;함은영
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2012년도 추계 학술논문 발표대회
    • /
    • pp.99-100
    • /
    • 2012
  • Aggregate thermal properties and cooling methods are most important to evaluate the residual mechanical properties of concrete. In this study, we evaluate the residual mechanical properties of concrete according to the aggregate type and cooling method. We use the normal weight aggregate and light weight aggregate which have different thermal properties. After heating to the target temperature, we evaluate the mechanical properties according to the slow and fast cooling condition. As a result, normal weight aggregate concrete has higher effectiveness of cooling conditions than light weight aggregate concrete.

  • PDF

Ginkgo biloba 세포배양에서 배지 및 배양조건이 세포성장 및 Flavonol Glycosides 생합성에 미치는 영향 (Effects of Nutrients and Culture Conditions on the Cell Growth and the Flavonol Glycosides Production in Cell Cultures of Ginkgo biloba)

  • 이원규;유연우변상요정헌관
    • KSBB Journal
    • /
    • 제8권1호
    • /
    • pp.55-61
    • /
    • 1993
  • Ginkgo biloba의 세포배양을 통하여 세포성장과 flavonol glycosides의 생성에 영향을 미치는 여러 조건들을 연구하였다. 다양한 지역으로부터 유도된 세포주들의 세포성장과 flavonol glycosides의 생합성 능력은 서로 차이가 있었다. 이들의 캘러스 및 현탁 세포는 배지조건과 배양조건에 따라 성장 및 f1avonol glycosides 생합성에 많은 영향을 받았었다. 특히 배양조건 중 빛의 영향은 현저하여 명조건에서의 f1avonol glycosides의 생성은 암조건보다 10배 이상 증가함을 알 수 있었다.

  • PDF