• Journal of Ocean Engineering and Technology
• /
• v.24 no.6
• /
• pp.16-22
• /
• 2010

In this paper, the diffraction problems for fixed offshore structures are solved using a hybrid scheme. In this hybrid scheme, potential-based solutions and the Navier-Stokes-based finite volume method (FVM) with a volume-of-fluid (VOF) method are combined. We introduce a buffer zone for efficient wave-making and damping. In this buffer zone, the near field solution from FVM-VOF is gradually changed to Stokes' 2nd order wave solutions. Three different models, including the truncated cylinder, sphere, and wigleyIII model, are numerically investigated in regular waves with a wave steepness of 1/30. The efficiency and accuracy of the hybrid scheme are numerically validated from results using different domain sizes and buffer zones. The wave exciting forces from the FVM-VOF simulations are compared with experiments and potential-based solutions from the higher-order boundary element method (HOBEM). This comparison shows good agreement between the hybrid scheme and potential-based solutions.

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.519-528
• /
• 2003

Species composition and community structure of marine benthic community were studied in the intertidal zone of Jijindo Island, Gwangyang Bay. A total of 85 species of benthic marine plants including the 5 Cyanophyta, 9 Chlorophyta, 13 Phaeophyta, 56 Rhodophyta and 2 Magnoliophyta that were listed. The community structure was represented by Gelidium divaricatum in the upper zone, Celidium divalicatum and Ulva pertusa in the middle, and Ulva pertusa, Chondria crassicaulis, Chondracanthus intermedia and Sargassum thunbergii in the lower intertidal zone. The dominant species in the rnscro-zoobenthic community were Chthamalux challengeri in the upper and middle, Littorina brevicula between the upper and middle, and Mytilus edulis and Crassostrea gigas in the middle and lower intertidal zones. The economic benthic organisms such as Undaria pinnatifida, Mytilus edulis, and Crassostrea gigas found in the lower intertidal zone were frequently disturbed due to their collection by local resident. Therefore, it is necessary to record the correct information pertaining to these cases. The species diversity indices estimated kom different sources were quite different. They were 2.22 derived from frequency, 1.67 based on coverage, 2.17 based on sum of frequency and coverage and 2.04 derived from importance value. Species diversity and number of algal species in Gwangyang Bay have noticeably decreased, compared with their previously reported status. It is estimated that their decreases were caused by changes in the marine environment, especially pertaining to the polychaete community resulting from reclamation and dredging activity undertaken for the industrial development.

• The Plant Pathology Journal
• /
• v.34 no.2
• /
• pp.93-103
• /
• 2018

Leaf blotch of wheat caused by Bipolaris sorokiniana is a major constraint to wheat production, causing significant yield reduction resulting in severe economic impact. The present study characterizes to determine and compare pathogenic variability exist/not based on components of leaf blotch disease development and level of aggressiveness due to agroclimatic condition of B. sorokiniana in wheat. A total of 169 virulent isolates of B. sorokiniana isolated from spot blotch infected leaf from different wheat growing agroclimate of Bangladesh. Pathogenic variability was investigated on a susceptible wheat variety 'kanchan' now in Bangladesh. A clear evidence of positive relationship among the components was recorded. From hierarchical cluster analysis five groups were originating among the isolates. It resolved that a large amount of pathogenic diversity exists in Bipolaris sorokiniana. Variation in aggressiveness was found among the isolates from different wheat growing areas. Most virulent isolates BS 24 and BS 33 belonging to High Ganges River Flood Plain agro-climatic zones considered by rice-wheat cropping pattern, hot and humid weather, high land and low organic matter content in soil. Positive relationship was found between pathogenic variability and aggressiveness with agro-climatic condition.

• ALGAE
• /
• v.23 no.4
• /
• pp.289-294
• /
• 2008

To estimate seaweed biomass or standing crop, a nondestructive sampling can be beneficial because of not much destroying living plants and saving time in field works. We suggest a methodological procedure to estimate seaweed biomass per unit area in marine benthic habitats by using species-specific regression equations. Percent cover data are required from the field samplings for most species to convert them to weight data. However, for tall macroalgae such as kelps we need density data and their size (e.g., size class for subtidal kelps) of individuals. We propose that the field sampling should be done with 5 replicates of 50 cm x 50 cm quadrat at three zones of intertidals (upper, middle, lower) and three depth points (1, 5, 10 m) in subtidals. To obtain a reliable regression equation for a species, a substantial number of replicate is necessary from destructive samplings. The regression equation of a species can be further specified by different locality and different season, especially for the species with variable morphology temporally and spatially. Example estimation carried out in Onpyung, Jeju Island, Korea is provided to compare estimated values with real weight data.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.2
• /
• pp.77-84
• /
• 1997

This paper is concerning the development of multiple neural networks system of problem domains where the complete input space can be decomposed into several different regions, and these are known prior to training neural networks. We will adopt oblique decision tree to represent the divided input space and sel ect an appropriate subnetworks, each of which is trained over a different region of input space. The overall architecture of multiple neural networks system, called the federated architecture, consists of a facilitator, normal subnetworks, and tile networks. The role of a facilitator is to choose the subnetwork that is suitable for the given input data using information obtained from decision tree. However, if input data is close enough to the boundaries of regions, there is a large possibility of selecting the invalid subnetwork due to the incorrect prediction of decision tree. When such a situation is encountered, the facilitator selects a tile network that is trained closely to the boundaries of partitioned input space, instead of a normal subnetwork. In this way, it is possible to reduce the large error of neural networks at zones close to borders of regions. The validation of our approach is examined and verified by applying the federated neural networks system to the configuration design of a midship structure.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.1
• /
• pp.7-18
• /
• 2018

We have investigated the intensities and full width at half maximum (FWHM) of the high dispersion spectroscopic N III emission lines of AG Peg, observed with the Hamilton Echelle Spectrograph (HES) in three different epochs at Mt. Hamilton's Lick Observatory. The earlier theoretical Bowen line study assumed the continuum fluorescence effect, presenting a large discrepancy with the present data. Hence, we analyzed the observed N III lines assuming line fluorescence as the only suitable source: (1) The O III and N III resonance line profiles near ${\lambda}$ 374 were decomposed, using the Gaussian function, and the contributions from various O III line components were determined. (2) Based on the theoretical resonant N III intensities, the expected N III Bowen intensities were obtained to fit the observed values. Our study shows that the incoming line photon number ratio must be considered to balance at each N III Bowen line level in the ultraviolet radiation according to the observed lines in the optical zone. We also found that the average FWHM of the N III Bowen lines was about $5km{\cdot}s^{-1}$ greater than that of the O III Bowen lines, perhaps due to the inherently different kinematic characteristics of their emission zones.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.883-887
• /
• 2016

This study aims to evaluate the corrosion behavior of a newly developed high-strength steel in marine environments. Metals used in seawater are easily deteriorated because of the presence of corrosive species such as chloride ions in it. Seawater causes much higher corrosion than fresh water. Thus, the corrosion of steel in marine environment has been recognized as a crucial problem in designing structures which cannot be cathodically protected. In this study, the corrosion resistance of a newly developed high-strength steel was evaluated. Four different specimens were tested to confirm the corrosion resistance. The exposure corrosion test was carried out by exposing the specimens to different marine environments such as atmospheric, tidal, splash, and submerged zones for two years. The specimens taken out from each location were cleaned ultrasonically and chemically prior to the evaluation of their corrosion resistance by the weight loss method. Finally, the pitting depth of the specimens was also measured to evaluate their pitting corrosion. The conditions used for the corrosion test were similar to the environmental conditions. The corrosion test results revealed that the corrosion rate and pitting corrosion of the newly developed high-strength steel was lower than that of the other carbon steels.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09c
• /
• pp.55-60
• /
• 2010

Rockfill zones in CFRD consist typically of large granular materials, usually the maximum particle size up to several meters, which makes laboratory testing to determine the mechanical properties of rockfill difficult. Commonly, the design strength of the rockfills is obtained by scaling down the original rockfill materials and performing laboratory strength tests for the reduced size materials. The objective of the present study is to investigate the effect of particle size on the shear behavior and the strength for granular materials. A series of large-scale triaxial tests was conducted on large granular materials with the maximum particle size varying from 20 to 50mm. The test results showed that overall shear behaviors were similar between the samples with different particle sizes while there were slight differences in the magnitudes of the peak shear stress between the samples. In addition, a simulation of the granular material with the max. particle size of 20mm was performed using DEM code, $PFC^{2D}$, and compared with the test results. The deviatoric stress versus strain behaviors of experimental and numerical tests were found to be matched well up to the peak stress state.

• Advances in materials Research
• /
• v.6 no.3
• /
• pp.233-243
• /
• 2017

This paper describes an investigation on the effect of using three different filler metals on fatigue behavior of mechanical structures welded. The welding is carried out on the steel A510AP used for the manufacture of gas cisterns and pipes. The welding process used is manual welding with coated electrodes and automatic arc welding. Compact tension CT50 specimen has been used. The three zones of welded joint; filler metal FM, heat affected zone HAZ and base metal BM have been investigated. The results show that the crack growth rate CGR is decreasing respectively in BM, FM and HAZ; however, this variation decreases when stress intensity factor SIF increases. For low values of SIF, the CGR is inferior in the over-matched filler metal of which the value of mismatch M is near unity, but for high values of M the CGR is superior, and the effect of the over-matching on CGR becomes negative. No deviation of the crack growth path has been noticed.

• Journal of Species Research
• /
• v.8 no.4
• /
• pp.395-406
• /
• 2019

The aim of this study was to compile a species list of endemic water beetles of Mongolia and determine their distribution patterns. A total of 1,179 individuals of endemic water beetles were collected from nine different sub-basins (123 sample points) throughout the country. Currently, 21 endemic and sub-endemic species have been recorded in Mongolia. Eight of these species were strictly endemic. The endemic and sub-endemic species were found only among four families: Dytiscidae (10 out 99 spp.), Gyrinidae (1 out 7 spp.), Helophoridae (5 out 16 spp.), and Hydraenidae (5 out 13 spp.). The rate of endemism was higher in Hydraenidae than other families (38.4%). Endemic beetle fauna was most similar between the Onon and Kherlen River Basins (80%). Helophorus parajacutus Angus, 1970 was common in five sub-basins, but Agabus kaszabi $Gu{\acute{e}}orguiev$, 1972, Gyrinus sugunurensis Nilsson, 2001 and Ochthebius mongolicus Janssens, 1967 were recorded from only one sub-basin. In terms of sub-endemic species, Mongolia was mostly similar to the fauna of Eastern Siberia, Russia (73.7%) than other neighboring regions. Due to Mongolia's vast territory and different natural zones, endemism was exceptionally low (12.4%), but these data provide baseline information of endemic and rare species for their further conservation.