• Journal of Acupuncture Research
• /
• v.20 no.5
• /
• pp.151-158
• /
• 2003

Objective: There have not been so many study about the quality of acupuncture needle tip. In order to ensure safe acupuncture treatment, the quality of needle tip is essential. Therefore we investigated the current condition of the tip of the acupuncture needles in Korea. Methods: We have selected the needles that made by 8 companies in Korea, and selected 50 pieces from 1000 pieces each company by randomized methods. and observed the tip of each needle using a scanning electron microscope at ${\times}800$ magnification. Results & Discussion: We found that needles had several defects such as scratch marks on the surface, metallic scuff, lumps and irregularities of the needle tips, stubbed or malformed tips, tips of point off-center, peeled off coated tips. There was much difference on the quality of needle among the manufacturer, and some needles seem to need to do- thorough quality control. It is necessary to intensify quality management and a concentrated control on manufacturing process of acupuncture needles.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.1
• /
• pp.303-322
• /
• 2004

In this study, I worked on necessary contents for Information Literacy of Korean universities by Delphi Method. The survey resulted in 100 necessary contents in five categories and each category presents average points and ranks of importance. Contents of high rank in each category should be valued highly when educational programs are to be designed. One remarkable difference in comparison with ACRL standards is that there are a lot of contents involved with basic understanding about Scientific Information System and Information Technology and knowledge application in this study, and another is that there is a lack of contents which require analytic judgements. The significance of this study lies in presenting directions and discussion points in designing of Information Literacy of Korean universities.

• The Journal of Korean Medicine
• /
• v.28 no.3 s.71
• /
• pp.173-182
• /
• 2007

Objective : To develop an integrated curriculum for acupuncture treatment and pain sensitivity practice, and discuss its usefulness. Method : We established an integrated practice program incorporating acupuncture and pain on physiology perspectives, and measured pain sensitivity at Yin (PC6${\sim}$PC4) and Yang (TE5${\sim}$TE9) meridians before and after the acupuncture treatment. Results : The Yang (39.4${\pm}$23.5) and Yin (46.0${\pm}$25.5) meridians have significantly different degrees of pain sensitivity (n=118, p=0.018). Pain sensitivity was significantly decreased after acupuncture treatment at Yang (54.63${\pm}$28.02/ 40.81${\pm}$29.39) and Yin (56.13${\pm}$27.88/ 38.72${\pm}$25.17) meridians (n=16, p<0.001). Discussion and Conclusion : The difference between the Yin and Yang meridians can be materialized in this integrated practice curriculum model. The effectiveness of this integrated class and suggestions for improvement of integrated curricula were discussed.

• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.1
• /
• pp.45-51
• /
• 1992

A study on acidity in fog, dew and frost was carried out. Samples were taken during May 1990-February 1991 at two sites in Chongwon, Choongbook. The acidity of dew and of fog collected from grass at site A was 4.89 and 5.46, respectively. Dew in summer showed very strong acidity. The volume of dew deposited on grass was much less than the volume of rain, but dew is effective to diffuse acid predursors and acid materials. Dew and fog can remove more effectively atmospheric acid materiasl deoposited on grass by diurnal turbulent motion rather than direct absorption of acid predursors and materials in the atmosphere. In a polluted area, acidic dew and fog can be occurred by the direct absorption and oxidation of acidic predursors in the atmosphere as well as the role of wet removal on grass surface. Acidity of frost collected on teflon surface showed little difference to acidity of dew and fog on teflon surface. This suggests a similar absorption mechanism of atmospheric precursors and materials into dew and frost in the atmosphere. Strong acidity in dew, fog and frost appeared to occur from local pollution sources of several ten kilometres. In particular, strong acidity in dew, fog, and frost together with acid rain can accelerate a damage in ecosystems. Discussion is made on scientific analyses and seasonal variations of acidity of fog, dew and frost. A mechanism on acidification of fog, dew and frost is also discussed.

• Earthquakes and Structures
• /
• v.8 no.5
• /
• pp.1091-1111
• /
• 2015

Base isolation is an effective method for protecting structures against earthquake hazard. It elongates the period of vibration and introduces supplemental damping to the structural system. The stiffness, damping and displacement are coupled forcing the code seismic design procedure to be unnecessarily complicated. In addition, the force reduction factor -a key parameter in the design procedurehas not been well addressed by seismic design codes at the high levels of damping due to the pronounced difference between pseudo and actual accelerations. In this study, a comparison has been conducted to evaluate eight different methods, in the literature, for calculating the force reduction factor due to damping. Accordingly, a simplified seismic analysis procedure has been proposed based on the well documented N2 method. Comprehensive analysis has been performed for base-isolated structure models for direct application and verification of the proposed procedure. The results have been compared with those of the European code EC8, the nonlinear time history analysis and investigations in the literature, where good agreement has been reported. In addition, a discussion has been elaborated for the resulted response of the base-isolated structure models with respect to the dynamic characteristics of the base isolation system.

• Structural Engineering and Mechanics
• /
• v.30 no.1
• /
• pp.1-20
• /
• 2008

The dynamic characteristics of the passive, semi-active, and active tuned-liquidcolumn dampers (or TLCDs) are studied in this paper. The design of the latter two are based on the first one. A water-head difference (or simply named as water head in this paper) of a passive TLCD is pre-set to form the so-called semi-active one in this paper. The pre-set of water head is released at a proper time instant during an earthquake excitation in order to enhance the vibration reduction of a structure. Two propellers are installed along a shaft inside and at the center of a passive TLCD to form an active one. These two propellers are driven by a servo-motor controlled by a computer to provide the control force. The seismic responses of a five-story shear building with a passive, semiactive, and active TLCDs are computed for demonstration and discussion. The responses of this building with a tuned mass damper (or TMD) are also included for comparison. The small-scale shaking-table experiments of a pendulum-like system with a passive or active TLCD to harmonic and seismic excitations are conducted for verification.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.42
• /
• pp.337-364
• /
• 2009

Trade remedy is the system that additional duty or import quantity restriction would be imposed on the import products, in case that unfair imports damage domestic industry or even proper import products damage significantly domestic industry. The system is secured by the act of unfair trade practice investigation & industrial damage remedy, tariff act, WTO agreement. Anti-dumping duty act is the system that duties are assessed with the equal or less amount of the difference between normal transaction price and dumping price, in case that the product imported under dumping price causes or may cause damages in domestic industry, or the development of domestic industry should be delayed practically. Recently, the problems related with anti-dumping duty imposed as the part of the trade remedy occur frequently. It is necessary to discuss whether the anti-dumping duty act is practically trade remedy which does comply with GATT regulations and WTO agreements as the criteria of international law and is in line with the intent of domestic act in the suffered country, or it does return to protective trade or reduce the protection of consumer. On the basis of this discussion, it would be difficult to impose the antidumping duty on industrial products in order to protect domestic industry, when considering the expected free trade agreements of Korea-US, Korea-China and Korea-Japan. In order to survive under the current severe competition of world trade market, companies should raise the competitiveness by themselves without relying on the current trade acts to provide with a certain protection. This thesis should bring those attentions.

• Journal of Radiation Protection and Research
• /
• v.41 no.2
• /
• pp.111-115
• /
• 2016

Background: The scattered photons cause reduction of the contrast of radiographic image and it results in the degradation of the quality of the image. In order to acquire better quality image, an anti-scattering x-ray gird should be equipped in radiography system. Materials and Methods: The X-ray anti-scattering grid of the inclined type based on the hybrid concept for that of parallel and focused type was tested by MCNP code. The MCNPX 2.7.0 was used for the simulation based test. The geometry for the test was based on the IEC 60627 which was an international standard for diagnostic X-ray imaging equipment-Characteristics of general purpose and mammographic anti-scatter grids. Results and Discussion: The performance of grids with four inclined shielding material types was compared with that of the parallel type. The grid with completely tapered type the best performance where there were little performance difference according to the degree of inclination. Conclusion: It was shown that the grid of inclined type had better performance than that of parallel one.

• Journal of Radiation Protection and Research
• /
• v.45 no.1
• /
• pp.35-44
• /
• 2020

Background: Cadmium zinc telluride (CZT) is a promising material because of a high detection efficiency, good energy resolution, and operability at room temperature. However, the cost of CZT dramatically increases as its size increases. In this study, to achieve a large effective volume with relatively low cost, an array structure comprised of individual virtual Frisch-grid CZT detectors was proposed. Materials and Methods: The prototype consisted of 2 × 2 CZTs, a holder, anode and cathode printed circuit boards (PCBs), and an application-specific integrated circuit (ASIC). CZTs were used and the non-contacting shielding electrode method was applied for virtual Frisch-grid effect. An ASIC was used, and the holder and the PCBs were fabricated. In the current system, because the CZTs formed a common cathode, a total of 5 channels were assigned for data processing. Results and Discussion: An experiment using ¹³⁷Cs at room temperature was conducted for 10 minutes. Energy and timing information was acquired and the depth of interaction was calculated by the timing difference between the signals of both electrodes. Based on obtained three-dimensional position information, the energy correction was carried out, and as a result the energy spectra showed the improvements. In addition, a Compton image was reconstructed using the iterative method. Conclusion: The virtual Frisch-grid CZT detector based on the array structure was developed and the energy spectra and the Compton image were successfully acquired.

• Journal of the Korean Society of Costume
• /
• v.64 no.6
• /
• pp.161-175
• /
• 2014

This paper investigates the differences between characteristics of street fashions due to regional and cultural differences in southern and northern region of China. Beijing and Shenzhen were chosen as representative cities for the two areas. Empirical research and literature study were performed for this study. Empirical studies were performed by using a total of 708 images of dresses, which were collected through direct imaging. Through discussion with experts, the collected data were classified into five categories; Modern trendy, Romantic, Easy casual, Ethnic, and Classical/Traditional. The data was analyzed by using cross tabulation and frequency analysis. Content analysis for each category was also conducted. As a consequence of this study, a significant difference between Beijing and Shenzhen were observed. As a city, which puts emphasis on practicality and modernity, Beijing showed a higher frequency of modern and trendy style than the other city. On the other hand, Shenzhen showed a higher frequency of romantic style and was distinguished as a city of femininity and decorative preference of fashion style. This study intends to contribute to the academic community of Chinese fashion and to help Korean clothing companies to be launched in Chinese market in the future.