• 수산해양기술연구
• /
• 제23권4호
• /
• pp.157-162
• /
• 1987

장어통발의 P.P깔때기 살과 대나무 깔때기 살의 탄성을 측정하고 측면 구멍을 막은 통발과 원형의 유수저항, 침강시간 및 미끼의 냄새확산 등을 관찰한 다음 해상어획 시험을 행한 결과는 다음과 같다. 1. P.P 깔때기 살의 탄성은 대나무 살보다 훨씬 작고, 하중이 증가할수록 탄성회복도는 감소하였다. 2. 플라스틱 장어통발의 유수저항 R(kg)는 유속 V(m/sec)에 따라 다음 관계식으로 나타낼 수 있다. R=0.36V 상(2.01) 3. 장어통발의 침강시간은 측면 구멍을 막은 경우 수면상에서의 완전 침수까지 1~2초 정도 원형보다 지연되나 그 후의 침강속도는 거의 차이가 없었다. 4. 통발 내의 미끼 수용액은 측면 구멍을 많이 막을수록 원형보다 입구쪽으로 집중되어 확산되었다. 5. 측면 구멍을 일부 막은 통발과 원형을 가지고 어획시험을 한 결과 통발당 평균 어획미수나 평균어획량의 어획성능에 있어서 뻘로 된 어장에서는 차이가 없는 것 같다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권11호
• /
• pp.1624-1628
• /
• 2008

Experiments were conducted to evaluate the nutritional value of yellow-seeded rapeseed meal (YRSM). In the first experiment nutrient retention was recorded by 48 Arbor Acres-broiler chickens (28-d old) to determine AMEn (nitrogen-corrected apparent metabolizable energy), coefficient of apparent protein digestibility based on ileal digesta nitrogen, excreta nitrogen and uric acid nitrogen. The second experiment was carried out with 304 Arbor Acres-broiler chickens to compare effects of SBM (soybean meal) and YRSM on performance, carcass and digestive tract status. In the control treatment, SBM was replaced by graded levels of YRSM at 15, 22.5 and 30% of diet. Digestibility of YRSM protein was significantly lower (p<0.001) than SBM protein. The protein digestibility based on ileal measurement was significantly higher (p<0.001) than protein digestibility from excreta samples. There was no significant difference (p>0.001) between ileal and excreta digestibility of protein based on uric acid. AMEn as a fraction of gross energy was 0.54 in SBM and 0.45 in YRSM. With the exception of 30% YRSM, other YRSM treatments resulted in major effects on length and weight of the gastrointestinal tract. The results of this study have shown no adverse effect on performance as well as protein digestibility and energy value in response to replacement of SBM by YRSM with the exception of 22.5 and 30% YRSM.

• 동의생리병리학회지
• /
• 제19권6호
• /
• pp.1673-1675
• /
• 2005

The pulse diagnosis is an important and universal method in Oriental medicine. Nevertheless, because of characteristic that depends on subjective sense of Oriental medicine doctor (OMD), it is not recognized by objective basis. The Korean Institute of Oriental Medicine(KIOM) and Daeyo Medi. Co. Ltd. developed the 3-D Mac using arrey piezoresistive sensors and multi-axial robot. 133 healthy subjects participated in this study, 75 males and 58 females, between 20 and 70 years of age. All subjects were relaxed in a supine position on a comfortable chair for twenty minutes before the measurement was taken. The measured position is the radial artery of subject's left wrist and the position is called Chon, Kwan and Chuck in Oriental medicine. To detect floating and sinking pulse, we established coefficient of floating and sinking(CFS). CFS means relative position of maximum pulse pressure in PH curve. The lower CFS value means that the pulse has floating tendency. There was significant diffence between CFS and diagnosis of floating-sinking pulse by OMD(p=0.020). CFS value of over 40's group was significantly larger than those of 20's and 30's(p=0.000). There was no significant difference between male and female(p=0.061).

• 한국표면공학회지
• /
• 제49권5호
• /
• pp.431-438
• /
• 2016

This research investigated the relationship between the corrosion damage characteristics of offshore wind steel substructure and the time of current density application by electrochemical accelerated short-term corrosion test. The galvanostatic corrosion was conducted on the steel specimens in natural seawater with a constant current density ranging from $1mA/cm^2$ to $200mA/cm^2$ for 1 ~ 180 min. Macro and micro observation was carried out on the surface of the corrosion damaged area using SEM and 3-dimensional analysis microscope. The weight loss of the specimens before and after was calculated as the difference between the initial weight prior to corrosion and weight after removal of the corrosion product. It was shown that during galvanostaic corrosion process, the corrosion behavior could be characterized by the onset of pitting corrosion in the early stage and the uniform corrosion in the late stage, showing damage development in the depth direction with the time of current application. The result of the 3D analysis revealed that both damage depth and surface roughness increased with increasing time of current application. The weight loss curves with time showed that a coefficient of determination ($R^2$) was relatively high for the relationship between the time of current application and weight loss. As a result, the degree of corrosion can be controlled by simply varying the time of current application.

• 한국전산구조공학회논문집
• /
• 제30권5호
• /
• pp.381-387
• /
• 2017

섬유강화 복합재료는 열팽창 계수의 방향성을 갖고 있을 뿐만 아니라 제작과정 온도와 실제 사용온도 사이의 차이 때문에 필연적으로 열응력 효과를 받게 된다. 이러한 열응력에 의한 파손현상은 실제 항공우주산업에서의 응용이 증대되고 있는 두꺼운 복합 적층판의 경우에 더욱 현저한 현상으로 적층판의 역학적 기능 및 파단강도에 큰 영향을 미치게 된다. 본 연구에서는 복잡한 재질로 구성되고 높은 세장비를 가진 블레이드 날개 구조의 차원축소 및 열 응력 복원 이론을 소개하고 3차원 유한요소모델과 비교결과를 통해 효율성과 정확성을 입증한다. 또한 차원을 축소한 모델링을 구성하고 복원이론를 이용하여 열적 환경에 적용된 복합재 보 단면의 열응력을 차원 복원하고 시각적으로 형상화하는 효율적인 복원해석 과정을 소개하고자 한다.

• 한국전자파학회논문지
• /
• 제9권5호
• /
• pp.567-577
• /
• 1998

유한차분 시간영역 방법을 이용하여 연속 및 불연속 마이크로스트립올 해석할 때 홉수 경계조건은 Berenger의 완전 접합충(Perfectly Matched Layer:PML)올 3차원으로 적용하고, 전원의 인가는 기존의 마이크로스트립 전면(front face)에 인가하는 방법 대신 내부전원(Inner Source Technique:IST)을 이용하였다. 이 방법을 이용하면 de성분의 왜곡이 개선되고, 에베네센트(evanescent) 및 복사 전자계가 존재하는 측면과 윗면의 계산 영역올 줄이더라도 해석된 특성은 신뢰할 수 있는 결과를 얻올 수 있었다. 또한 내부전원의 위치를 조정함으로서 불완전한 경계조건에 의해서 발생되는 반사파의 영향올 효과적으로 제거할 수 있었다. 본 연구에서는 이러한 방법을 이용하여 마이크로스트립의 분산특성 및 특성임피던스를 계산하였다. 그리고 종단개방 마이크로스트립의 산란계수의 크기와 위상올 구하고 그 동가회로를 계산하였다.

• 치과방사선
• /
• 제25권2호
• /
• pp.363-373
• /
• 1995

The aim of this study was to evaluate and compare observer performance between conventional radiographs and their digitized images for the detection of bone loss in the bifurcation of mandiblar first molar. One dried human mandible with minimal periodontal bone loss around the first molar was selected and serially enlarged 17 step defects were prepared in the bifurcation area. The mandible was radiographed with exposure time of 0.12, 0.20, 0.25, 0.32, 0.40, 0.64 seconds, after each successive step in the preperation and all radiographs were digitized with IBM-PC/32 bit-Dx compatible, video camera (VM-S8200, Hitachi Co., Japan), and color monitor(Multisync 3D, NEC, Japan). Sylvia Image Capture Board for the ADC(analog to digital converter) was used. The obtained results were as follows: 1. In the conventional radiographs, the mean score of the readability was higher at the condition of exposure time with 0.32 second. Also, as the size of artificial lesion was increased, the readability of radiographs was elevated (P<0.05). 2. In the digital images, the mean score of the readability was higher at the condition of exposure time with 0.40 second. Also, as the size of artificial lesion was increased, the readability of digital images was elevated(P<0.05). 3. At the same exposure time, the mean scores of readibility were mostly higher in the digitized images. As the exposure time was increased, the digital images were superior to radiographs in readability. 4. As the size of lesion was changed, the digital images were superior to radiographs in detecting small lesion. 5. The coefficient of variation of mean score has no significant difference between digital images and radiographs.

• 한국정보기술학회논문지
• /
• 제16권11호
• /
• pp.77-84
• /
• 2018

본 논문에서는 T-junction 전력 분배기를 이용한 원형 편파 마이크로스트립 패치 안테나를 제안하였다. 제안된 안테나의 동작 주파수는 2.4GHz의 ISM 대역이며, 패치 안테나의 두 가장자리에 $90^{\circ}$의 위상차를 급전하여 원형 편파를 유도하였다. 안테나의 구조는 일반적인 패치 안테나와 T-junction 전력 분배기로 구성된다. 안테나의 최적화를 위해 반사계수, 축비, 방사패턴 등이 분석된다. 안테나의 임피던스 대역폭은 2.39~2.43GHz 대역에서 40MHz의 대역폭이 관찰되었으며, 축비 대역폭은 2.398~2.410GHz 대역에서 약 12MHz의 대역폭이 관찰되었다. 안테나의 방사패턴은 우회전 원형 편파로 동작하였다. 또한 안테나의 이득은 XZ 및 YZ-평면에서 각각 2.04, 3.4㏈ic가 관찰되었다.

• Earthquakes and Structures
• /
• 제22권6호
• /
• pp.539-548
• /
• 2022

Steel plate shear walls (SPSWs) are one of the most important and widely used lateral load-bearing systems. The reason for this is easier execution than reinforced concrete (RC) shear walls, faster construction time, and lower final weight of the structure. However, the main drawback of SPSWs is premature buckling in low drift ratios, which affects the energy absorption capacity and global performance of the system. To address this problem, two groups of SPSWs under cyclic loading were investigated using the finite element method (FEM). In the first group, several series of circular rings have been used and in the second group, a new type of SPSW with concentric circular rings (CCRs) has been introduced. Numerous parameters include in yield stress of steel plate wall materials, steel panel thickness, and ring width were considered in nonlinear static analysis. At first, a three-dimensional (3D) numerical model was validated using three sets of laboratory SPSWs and the difference in results between numerical models and experimental specimens was less than 5% in all cases. The results of numerical models revealed that the full SPSW undergoes shear buckling at a drift ratio of 0.2% and its hysteresis behavior has a pinching in the middle part of load-drift ratio curve. Whereas, in the two categories of proposed SPSWs, the hysteresis behavior is complete and stable, and in most cases no capacity degradation of up to 6% drift ratio has been observed. Also, in most numerical models, the tangential stiffness remains almost constant in each cycle. Finally, for the innovative SPSW, a relationship was suggested to determine the shear capacity of the proposed steel wall relative to the wall slenderness coefficient.

• Smart Structures and Systems
• /
• 제31권1호
• /
• pp.1-11
• /
• 2023

Assessment of the compressive strength of concrete plays a major role during formwork removal and in the prestressing process. In concrete, temperature changes occur due to hydration which is an influencing factor that decides the compressive strength of concrete. Many methods are available to find the compressive strength of concrete, but the maturity method has the advantage of prognosticating strength without destruction. The temperature-time factor is found using a LM35 temperature sensor through the IoT technique. An experimental investigation was carried out with 56 concrete cubes, where 35 cubes were for obtaining the compressive strength of concrete using a universal testing machine while 21 concrete cubes monitored concrete's temperature by embedding a temperature sensor in each grade of M25, M30, M35, and M40 concrete. The mathematical prediction model equation was developed based on the temperature-time factor during the early age compressive strength on the 1^st, 2^nd, 3^rd and 7^th days in the M25, M30, M35, and M40 grades of concrete with their temperature. The 14^th, 21^st and 28^th day's compressive strength was predicted with the mathematical predicted equation and compared with conventional results which fall within a 2% difference. The compressive strength of concrete at any desired age (day) before reaching 28 days results in the discovery of the prediction coefficient. Comparative analysis of the results found by the predicted mathematical model show that, it was very close to the results of the conventional method.