• International Journal of Railway
• /
• v.8 no.2
• /
• pp.50-54
• /
• 2015

The primary function of the trackbed in a conventional railway track system is to decrease the stresses in the subgrade to be in an acceptable level. A properly designed trackbed layer performs this task adequately. Many design procedures have used assumed and/or are based on critical stiffness values of the layers obtained mostly in the field to calculate an appropriate thickness of the sublayers of the trackbed foundation. However, those stiffness values do not consider strain levels clearly and precisely in the layers. This study proposes a method of computation of stiffness that can handle with strain level in the layers of the trackbed foundation in order to provide properly selected design values of the stiffness of the layers. The shear modulus values are dependent on shear strain level so that the strain levels generated in the subgrade in the trackbed under wheel loading and below plate of Repeated Plate Bearing Test (RPBT) are investigated by finite element analysis program ABAQUS and PLAXIS programs. The strain levels generated in the subgrade from RPBT are compared to those values from RC (Resonant Column) test after some consideration of strain levels and stress consideration. For comparison of shear modulus G obtained from RC test and stiffness moduli $E_{v2}$ obtained from RPBT in the field, many numbers of mid-size RC tests in laboratory and RPBT in field were performed extensively. It was found in this study that there is a big difference in stiffness modulus when the converted $E_{v2}$ values were compared to those values of RC test. It is verified in this study that it is necessary to use precise and increased loading steps to construct nonlinear curves from RPBT in order to get correct $E_{v2}$ values in proper strain levels.

• Journal of KIISE:Software and Applications
• /
• v.27 no.5
• /
• pp.543-550
• /
• 2000

An adaptive bit-reduced mean absolute difference (ABRMAD) is presented as a criterion for the block-matching algorithm (BMA) to reduce the complexity of the VLSI Implementation and to improve the processing time. The ABRMAD uses the lower pixel resolution of the significant bits instead of full resolution pixel values to estimate the motion vector (MV) by examining the pixels Ina block. Simulation results show that the 4-bit ABRMAD has competitive mean square error (MSE)results and a half less hardware complexity than the MAD criterion, It has also better characteristics in terms of both MSE performance and hardware complexity than the Minimax criterion and has better MSE performance than the difference pixel counting(DPC), binary block-matching with edge-map(BBME), and bit-plane matching(BPM) with the same number of bits.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.331-341
• /
• 1995

The purpose of this study was to aid in the prediction of tumor cell tolerance to radiotherapy and/or chemotherapy. For this study, cell surviving curves were obtained for murine melanoma Bl6 cell line using semiautomated M1T assay. 2,4,6,8, 10Gy were irradiated at a dose rate of 210cGy/min using /sup 60/Co Irradiator ALOORADO 8. After irradiatior, B16 cell lines(2.5×10⁴ cells/ml) were exposed to bleomycin and cisplatin at concentration of 0.2㎍/㎖, 2㎍/㎖ and 20㎍/㎖ for I hour respectively. The viable cells were determined for each radiation dose and/or each concentration of drug. And they were compared to control values. The obtained results were as follows : 1. There was significant difference of surviving fraction at 4, 6, 8, 10Gy on B16 cell line(P<0.05). 2. There was significant difference of cytotoxicity between bleomycin and cisplatin at concentration of 0.2㎍/㎖ and 2㎍/㎖(P<0.05) on B16 cell line, but there was no significant difference of cytotoxicity at concentration of 20㎍/㎖ on B16 cell line. 3. There was significant difference of cytotoxicity of bleomycin after irradiation of 2Gy and 10Gy on B16 cell line(P<0.01). 4. There was significant difference of cytotoxicity of cisplatin at concentration of 20㎍/㎖ after irradiation on B16 cell line.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.4
• /
• pp.202-211
• /
• 2017

In this study, the exergy that can be reflected in the energetic and economic values was used to assess the heat tariff of a district heating (DH) system instead of the enthalpy. It is difficult to directly apply the exergy to the current heat-charge system because of the complicated calculation; therefore, the difference between the supply and return temperatures was converted to the exergy-temperature difference for the ease of the heat-amount calculation. As a result of the exergy analysis for a DH substation, the exergy-temperature difference did not affect the surrounding temperature and pressure loss. The supply temperature and the maximum difference between the supply temperature and the return temperature exerted the main effect on the exergy-temperature difference. The new heat charge of a DH user was slightly reduced in winter compared with the previous charge, but the heat charges in the other seasons are almost the same. It is concluded from the assessment of the heat tariff for which the exergy is used that this tariff is more feasible for both DH suppliers and consumers compared with enthalpy.

• Journal of Sensor Science and Technology
• /
• v.14 no.5
• /
• pp.350-356
• /
• 2005

We have developed a dual-channel type automatic measurement system to evaluate AC-DC current transfer difference of the thermal current converter(TCC) which is primary standard of AC current. The output drift effect of the TCC is minimized by measuring simultaneously the output voltages of two TCCs using voltmeter. Furthermore, the offset voltage of the voltmeter is cancelled nearly out by taking the average values of two outputs of TCCs measured with the forward-reverse directions using dual channel scanner. The uncertainties of the automatic system were 7 to $86{\mu}A/A$ for 3 mA to 10 A at 40 Hz to 20 kHz, which were evaluated by the comparisons between adjacent range of TCCs and inter-comparison with national measurement institute of Germany(PTB). The capability for ac-dc transfer difference measurement was improved by one order compared with that for the manual ac-dc measurement system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.21-24
• /
• 2005

In this paper, field application of mass concrete using setting time difference of super retarding agent is reported to reduce hydration heat of concrete placed at newly constructed apartment house in Daejeon. Horizontal placing lift is applied. According to test results,: slump and air content meets the requirement of target values. For compressive strength, it exceeds the nominal strength ordered by the costumer. For temperature history, maximum temperature of center at top section shows $25.6^{\circ}C$, and at bottom section, $35.4^{\circ}C$. According to naked eye's investigation, no hydration heat crack is observed at the surface of concrete.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.227-234
• /
• 2000

The human sensibility caused by the motion of an object grasped by a human operator is defined as kinesthetic sense of arm. Due to nonlinearity and ambiguity of human sense, there is no absolute standard for quantification of kinesthetic sense. In this research, a so-called 2-dimensional arm motion generator is developed to present various mechanical impedance (i.e., stiffness or damping) characteristics to a human arm. The kinesthetic words representing arm kinesthetic sense are selected and then the subject's satisfaction levels on these words for given impedance values are measured and processed by the SD method and factor analysis. In addition, the quantification method using neural network is proposed to take into account the individual difference between the mean sensibility and each subject's sensibility. Through this proposed algorithm, the sensibility of human motion described qualitatively can be converted into engineering data ensuring objectivity, reproducibility, and universality.

• MALSORI
• /
• no.33_34
• /
• pp.57-69
• /
• 1997

In this paper, 1 will try to examine the aspects of formants, based on the LPC analysis. In this analysis, five Japanese vowels (a, i, u, e, o) will experience two kinds of experiments: vowels in isolated forms, and vowels in carrier sentences. The analysis results of Japanese vowels of the Japanese natives show a peculiar feature that Japanese vowels form respective vowel groups. Each Japanese vowel makes a statistically significant difference. In the Fl analysis of the vowels grouped by the informant's sex, Japanese vowel (a) shows the greatest standard deviation without regard to the informant's sex. In the F2 analysis of Japanese vowels, each vowel has a statistically significant difference. The fact that the male's [u] shows great standard deviation means that there is a great difference of the frontness of the tongue among the Japanese males in articulating [u]. Isolated vowels and carried vowels show statistically little significance between Fl and F2 frequency values. In another contrastive analysis between the isolated vowel group and the carried vowel group, whether a vowel is articulated in isolation or in a sentence appears to have little effect on its formant frequency.

• Structural Engineering and Mechanics
• /
• v.49 no.1
• /
• pp.41-64
• /
• 2014

The main objective of this article is the exploitation of a stochastic hybrid mesh-free method based on stochastic generalized finite difference (SGFD), Newmark finite difference (NFD) methods and Monte Carlo simulation for thermoelastic wave propagation and coupled thermoelasticity analysis based on GN theory (without energy dissipation). A thick hollow cylinder with Gaussian uncertainty in mechanical properties is considered as an analyzed domain for the problem. The effects of uncertainty in mechanical properties with various coefficients of variations on thermo-elastic wave propagation are studied in details. Also, the time histories and distribution on thickness of cylinder of maximum, mean and variance values of temperature and radial displacement are studied for various coefficients of variations (COVs).

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.6
• /
• pp.1735-1748
• /
• 2014

In this paper, we investigate the finite order transcendental meromorphic solutions of complex difference equation of Malmquist type $$\prod_{i=1}^{n}f(z+c_i)=R(z,f)$$, where $c_1,{\ldots},c_n{\in}\mathbb{C}{\backslash}\{0\}$, and R(z, f) is an irreducible rational function in f(z) with meromorphic coefficients. We obtain some results on deficiencies of the solutions. Using these results, we prove that the growth order of the finite order solution f(z) is 1, if f(z) has Borel exceptional values $a({\in}\mathbb{C})$ and ${\infty}$. Moreover, we give the forms of f(z).