• 소음진동
• /
• 제6권3호
• /
• pp.305-315
• /
• 1996

Present paper aims at the correlation of modal characteristics of folding fin between test and analysis using an optimization theory. Folding fin is composed of a movable fin, a base fin, and many functional components related to the folding mechanism. Joint parts of folding fin in FEM are initially modeled as rigid elements resulting some difference between test and analysis in modal characteristics. Therefore, some equivalent springs representing joint parts are introduced to improve the FEM model. The springs were set as design variables, while the frequency difference between test and analysis was set as the object function. Bayesian procedure was ujsed for the minimization.

• 기술혁신학회지
• /
• 제2권2호
• /
• pp.201-218
• /
• 1999

The article contains an introduction of possibility of applying Multi-Attribute Utility Theory(MAUT) for priority setting of R&D projects. MAUT is compared with AHP, which is widely used recently. These two techuiques are applied to set priorities of R&D projects In a Government-funded Research Institute. Six criteria are chosen from consultation with decision makers. They are composed of 1) validity as representative projects, 2) possibility of resource mobilization, 3) spillover effect of developed technologies, 4) possibility of success, 5) scope of participation and 6) clarity of research goal. To set priorities of R&D projects, SMART(Simple MultiAttribute Rating Technique) and DVM(Difference Value Measurement) out of many MAUT methods are used to design the utility function and to determine the weights among criteria. The aggregation model is additive on the assumption the criteria are independent. AHP executes pairwise comparisons for criteria and alternatives. From the results of the case study, the results and theoretical characteristics are compared.

• 대한조선학회논문집
• /
• 제41권4호
• /
• pp.17-29
• /
• 2004

Internal waves are computed using a ghost fluid method on an unstructured grid. Discontinuities in density and dynamic pressure are captured in one cell without smearing or oscillations along a multimaterial interface. A time-accurate incompressible Navier-Stokes/Euler solver is developed based on a three-point backward difference formula for the physical time marching. Artificial compressibility is introduced with respect to pseudotime and an implicit method is used for the pseudotime iteration. To track evolution of an interface, a level set function is coupled with the governing equations. Roe's flux difference splitting method is used to calculate numerical fluxes of the coupled equations. To get higher order accuracy, dependent variables are reconstructed based on gradients which are calculated using Gauss theorem. For each edge crossing an interface, dynamic pressure is assigned for a ghost node to enforce the continuity of total pressure along the interface. Solitary internal waves are computed and the results are compared with other computational and experimental results.

• Journal of the Optical Society of Korea
• /
• 제19권2호
• /
• pp.165-168
• /
• 2015

A simple method to determine the focal length of a lens using the Talbot image is presented. This method uses only one grating, requiring neither Moir$\acute{e}$ fringe analysis nor the angle between the gratings. The original Fourier transform was used to access the spectrum beyond the limitation set of the usual fast Fourier transform to determine the (de)magnification accurately enough to be used for the focal length. A set of Talbot images simulated numerically with the Fresnel diffraction integral was used to demonstrate the method. For focal lengths between 5550 mm and 5650 mm, the mean difference between the focal lengths determined from the Talbot images and the true values was 3.3 mm with the standard deviation of the difference being 3.8 mm. The true focal lengths can be recovered with an accuracy of 0.06%.

• 감성과학
• /
• 제9권2호
• /
• pp.101-109
• /
• 2006

판매원이 소비자의 얼굴외모를 보고 구매 선호도를 판단할 수 있다면 이에 대응하는 판매전략을 수립할 수 있을 것이다. 이를 위한 선결과제는 얼굴외모에 따라 구매 선호도의 차이를 밝히는 것이다. 따라서 본 연구의 목적은 눈썹유형별로 의복 구매 선호도의 차이를 분석하는 것이다. 관상학적인 방법으로 눈썹유형을 다섯 가지로 분류하고, 눈썹유형에 따라 의복 구매 선호도의 차이를 분석하였다. 분석결과, 눈썹 끝이 처진 사람들은 눈썹 끝이 오른 사람들에 비하여 평범한 이미지, 단순한 이미지, 점잖은 이미지, 얌전한 이미지의 의복을 더 선호하는 것으로 나타났다.

• 대한전자공학회논문지SD
• /
• 제37권12호
• /
• pp.24-28
• /
• 2000

본 논문에서는 레벨셋 방법을 이용한 표면 전진기를 사용하여 반도체 공정에서 3차원 증착 프로파일을 계산하는 방법을 보고한다. 레벨셋 방법을 이용하여 효율적으로 표면의 전진, 후퇴를 모델링 하기 위하여 반복법에 의한 초기화 방법을 새로이 개발하였다. 또한, 각각의 위치에서의 증착 및 식각률을 계산하기 위하여 소스에서 표면까지의 가시도 계산 방법과 표면 반사 모델을 개발하였다. 3차원 표면 전진기로 그림자 효과와 표면 반사가 고려된 계산을 수행하였다. 흡착 계수가 1인 경우와 0.3인 경우를 비교하여 반사, 스퍼터링에 의한 증착 프로파일의 변화를 비교하였다. 그리고 종횡비에 따른 증착률의 차이를 그림자 효과에 의한 가시각의 차이로 비교하였다.

• 대한물리치료과학회지
• /
• 제30권3호
• /
• pp.41-48
• /
• 2023

Background: This study examined the effects of the bridge exercise with trunk rotation on the thickness of body trunk muscles, including external oblique, internal oblique, and transverse abdominis in healthy male adults. Design: Randomized controlled trial Methods: Twenty-four men were evenly divided into a trunk rotation bridge exercise group and a basic bridge exercise group by drawing lots. The two groups performed the respective exercise for thirty minutes, three times a week for six weeks. repeated measure analysis of variance (ANOVA) was used after distinguishing between three different time points before the experiment, three weeks after the experiment, and six weeks after the experiment. The significance level was set at 0.05. In case an interaction between time and group existed, the paired t-test was used to examine the within-group difference. The independent-sample t-test was used to check the between-group difference. The significance level was set at 0.05. Results: All the men showed a significant change over time in their external oblique, internal oblique, and transverse abdominis muscles. An interaction between time and group was also found (p<0.05). Conclusion: The bridge exercise with trunk rotation causes a meaningful difference in the thickness of external oblique, internal oblique, and transverse abdominis muscles. Therefore, this study proposes the use of this exercise for lower-back stabilization in future research and clinical settings.

• 조명전기설비학회논문지
• /
• 제21권4호
• /
• pp.1-10
• /
• 2007

KH University has developed a large sky simulator which is its scale suits international standard. To verify the reliability of the sky simulator, the luminance of 36 points on the inner sky surface was measured and compared with the CIE standard overcast sky model. It was found that the sky simulator can reproduce the CIE standard overcast sky condition with 1.8[%] of mean difference. To identify the differences of daylighting performance, scale model measurements were taken under a real sky and in a sky simulator. Under overcast sky conditions, two kinds of scale model experiments were conducted by using the photometric sensor Li-cor. Firstly, a 1/20 scale model of a side-lit office room 4.9[m] wide, 7.2[m] long, and 2.6[m] high was created. Five measurement points were set at 1.2[m], 2.4[m], 3.6[m], 4.8[m], and 6.0[m] from the window. The mean difference of the light factor between the sky simulator and real sky was 7.1[%]. Secondly, a 1/30 scale model of a top-lit atrium 15[m] wide, 15[m] long, and 15[m] high was created. The measurement point was set at center of the room and the well indexes of the model were set in 5 types. The mean difference of the light factor between the sky simulator and real sky was 1.7[%]. This proved that the sky simulator is fully accurate and usable for daylighting research.

• 대한통합의학회지
• /
• 제8권2호
• /
• pp.131-138
• /
• 2020

Purpose : The purpose of this study was to investigate the effects of the frequency band pass filter on the P300 event-related potential in the working memory. Methods : The subjects were 20 women in their 20s who applied for participation in the experiment. Event-related potentials (ERPs) were elicited using 3-back tasks for the working memory, and were recorded from Fz, Cz, and Pz scalp electrodes. The high-pass filters were set to 0.01, 0.1, and 0.3 Hz for analysis purposes, and the low-pass filters were set to 30 and 15 Hz. The 3-back task was presented for a total of 100 times, among which 30 times were designated for the target stimulation (a matched number) and 70 times for the non-target stimulation (an unmatched number). The temporal interval between each stimulation was set at 1 second, while each time duration was randomly presented between 2 to 4 seconds. ERP were analyzed for the P300 recorded from Fz, Pz and Cz scalp electrodes. Results : Latency and amplitude had no significant interaction effects in both the high- and low-pass filters. For the main effects, the latency and amplitude of the P300 event-related potential had no significant difference in the high-pass filters, but the latency had a significant difference in the low-pass filter of Fz, and the amplitude had a significant difference in the low-pass filter of Pz. Conclusion : The results of this study showed that the less than 0.3 Hz high filters had no effects on the differences between the latency and amplitude of the P300 event-related potential in the working memory. The 30Hz low-pass filter, however, was found to be useful for recording the P300 event-related potential in the working memory.

• 한국의류학회지
• /
• 제40권1호
• /
• pp.171-187
• /
• 2016

The study performed a comparison analysis of market brand patterns for slim-fit dress shirts and analyzed the body surface development figure of men in their 40s using 3D body scan data and developed slim-fit dress shirt patterns suitable for middle-aged men. The sizes of slim-fit dress shirt patterns showed a slight difference depending on brand. The overlap map of slim-fit dress shirt patterns for brands demonstrates how difference of one-dimensional sizes reflect on two-dimensional patterns. This map provides useful information for pattern design and allows and easy recognition of pattern size differences. A try-on system evaluation through 3D-Simulation allows a grasp of the fitness of neckline and size tolerance of under the arms in front, the silhouette of side lines, and overall fitness in front that also allows analysis of the front/back balance of a shirt in side, the size tolerance proportion in front/back, and the fitness of the arm-hole line. Thus, we obtained try-on results that were equivalent to wearing actual clothing. According to the drafting size suggested in the developed final pattern, the total width was 'C/2+5.5cm', and the front was set at 1cm bigger in the size difference of the front and back. The width of the front neck and the back neck was set identically at 'C/12', while the width of the front neck was set to 'C/12+1.5cm'. For the armhole depth, we added 'C/4+2cm', and '0.5cm and 1.5cm' for the width of the front and back to anthropometry. The results of the try-on evaluation through 3D-Simulation indicated that the fitness of the final slim-fit dress shirt pattern was superior to available slim-fit dress shirt patterns on the market and evaluated as superior to the types for middle-aged men.